| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the DDNS Password parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system.
Successful exploitation of this vulnerability could allow the attacker to perform stored XSS attacks on the targeted system.
|
| This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the DDNS Username parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system.
Successful exploitation of this vulnerability could allow the attacker to perform stored XSS attacks on the targeted system.
|
| This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the Time Server 2 parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system.
Successful exploitation of this vulnerability could allow the attacker to perform stored XSS attacks on the targeted system.
|
| This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to insufficient validation of user supplied input for the Traceroute parameter at its web interface. A remote attacker could exploit this vulnerability by supplying specially crafted input to the parameter at the web interface of the vulnerable targeted system.
Successful exploitation of this vulnerability could allow the attacker to perform stored XSS attacks on the targeted system.
|
| A vulnerability in the web-based management interface of Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct cross-site scripting attacks. This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by submitting malicious input containing script or HTML content within requests that would stored within the application interface. A successful exploit could allow the attacker to conduct cross-site scripting attacks against other users of the affected application. |
| A vulnerability, which was classified as critical, has been found in Tenda W9 1.0.0.7(4456). Affected by this issue is the function setWrlAccessList of the component httpd. The manipulation of the argument ssidIndex leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-250706 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability classified as critical has been found in Tenda A15 15.13.07.13. Affected is an unknown function of the file /goform/SetOnlineDevName of the component Web-based Management Interface. The manipulation of the argument mac leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250704. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| PAX A920Pro/A50 devices with PayDroid_8.1.0_Sagittarius_V11.1.50_20230614 or earlier can allow local code execution via parameter injection by bypassing the input validation when flashing a specific partition.
The attacker must have physical USB access to the device in order to exploit this vulnerability. |
| A vulnerability has been found in SourceCodester House Rental Management System 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the component Manage Invoice Details. The manipulation of the argument Invoice leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-250609 was assigned to this vulnerability. |
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to cause rpd to crash, leading to Denial of Service (DoS).
On all Junos OS and Junos OS Evolved platforms, when NETCONF and gRPC are enabled, and a specific query is executed via Dynamic Rendering (DREND), rpd will crash and restart. Continuous execution of this specific query will cause a sustained Denial of Service (DoS) condition.
This issue affects:
Juniper Networks Junos OS
* 22.2 versions earlier than 22.2R2-S2, 22.2R3;
* 22.3 versions earlier than 22.3R2, 22.3R3.
Juniper Networks Junos OS Evolved
* 22.2 versions earlier than 22.2R2-S2-EVO, 22.2R3-EVO;
* 22.3 versions earlier than 22.3R2-EVO, 22.3R3-EVO.
This issue does not affect Juniper Networks:
Junos OS versions earlier than 22.2R1;
Junos OS Evolved versions earlier than 22.2R1-EVO.
|
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service.
If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS.
This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected.
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R2;
* 22.3 versions earlier than 22.3R2.
|
|
An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.
Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.
The following log message can be seen when the issue occurs:
Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>])
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S8;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R2-S2, 22.1R3;
* 22.2 versions earlier than 22.2R2-S1, 22.2R3.
|
| A vulnerability, which was classified as problematic, was found in code-projects Employee Profile Management System 1.0. Affected is an unknown function of the file edit_position_query.php. The manipulation of the argument pos_name leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250572. |
| Atril is a simple multi-page document viewer. Atril is vulnerable to a critical Command Injection Vulnerability. This vulnerability gives the attacker immediate access to the target system when the target user opens a crafted document or clicks on a crafted link/URL using a maliciously crafted CBT document which is a TAR archive. A patch is available at commit ce41df6. |
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS).
On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service.
This issue affects:
Juniper Networks Junos OS
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R2.
|
| NVIDIA DGX A100 BMC contains a vulnerability where an attacker may cause an LDAP user injection. A successful exploit of this vulnerability may lead to information disclosure. |
| The secret value used for access to critical UDS services of the MIB3 infotainment is hardcoded in the firmware.
Vulnerability discovered on Škoda Superb III (3V3) - 2.0 TDI manufactured in 2022.
|
| Nginx-ui is online statistics for Server Indicators Monitor CPU usage, memory usage, load average, and disk usage in real-time. The `Home > Preference` page exposes a small list of nginx settings such as `Nginx Access Log Path` and `Nginx Error Log Path`. However, the API also exposes `test_config_cmd`, `reload_cmd` and `restart_cmd`. While the UI doesn't allow users to modify any of these settings, it is possible to do so by sending a request to the API. This issue may lead to authenticated Remote Code Execution, Privilege Escalation, and Information Disclosure. This issue has been patched in version 2.0.0.beta.9. |
| Authentik is an open-source Identity Provider. Authentik is a vulnerable to a reflected Cross-Site Scripting vulnerability via JavaScript-URIs in OpenID Connect flows with `response_mode=form_post`. This relatively user could use the described attacks to perform a privilege escalation. This vulnerability has been patched in versions 2023.10.6 and 2023.8.6. |
| The application is vulnerable to Stored Cross-Site Scripting (XSS) in the endpoint /sofer/DocumentService.asc/SaveAnnotation, where input data transmitted via the POST method in the parameters author and text are not adequately sanitized and validated. This allows for the injection of malicious JavaScript code. The vulnerability was identified in the function for adding new annotations while editing document content.
Reporters inform that the vulnerability has been removed in software versions above 11.1.x. Previous versions may also be vulnerable, but this has not been confirmed.
|
