| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service.
If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a 'vmcore' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS.
This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected.
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3;
* 22.1 versions earlier than 22.1R3;
* 22.2 versions earlier than 22.2R2;
* 22.3 versions earlier than 22.3R2.
|
|
An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS).
When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover.
Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected.
The following log message can be seen when the issue occurs:
Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>])
This issue affects Juniper Networks Junos OS:
* All versions earlier than 20.4R3-S8;
* 21.1 versions earlier than 21.1R3-S4;
* 21.2 versions earlier than 21.2R3-S6;
* 21.3 versions earlier than 21.3R3-S3;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R2-S2, 22.1R3;
* 22.2 versions earlier than 22.2R2-S1, 22.2R3.
|
| A vulnerability, which was classified as problematic, was found in code-projects Employee Profile Management System 1.0. Affected is an unknown function of the file edit_position_query.php. The manipulation of the argument pos_name leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-250572. |
| Atril is a simple multi-page document viewer. Atril is vulnerable to a critical Command Injection Vulnerability. This vulnerability gives the attacker immediate access to the target system when the target user opens a crafted document or clicks on a crafted link/URL using a maliciously crafted CBT document which is a TAR archive. A patch is available at commit ce41df6. |
|
An Improper Check for Unusual or Exceptional Conditions vulnerability in Juniper DHCP Daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause the jdhcpd to consume all the CPU cycles resulting in a Denial of Service (DoS).
On Junos OS devices with forward-snooped-client configured, if an attacker sends a specific DHCP packet to a non-configured interface, this will cause an infinite loop. The DHCP process will have to be restarted to recover the service.
This issue affects:
Juniper Networks Junos OS
* All versions earlier than 20.4R3-S9;
* 21.2 versions earlier than 21.2R3-S7;
* 21.3 versions earlier than 21.3R3-S5;
* 21.4 versions earlier than 21.4R3-S5;
* 22.1 versions earlier than 22.1R3-S4;
* 22.2 versions earlier than 22.2R3-S3;
* 22.3 versions earlier than 22.3R3-S2;
* 22.4 versions earlier than 22.4R2-S2, 22.4R3;
* 23.2 versions earlier than 23.2R2.
|
| NVIDIA DGX A100 BMC contains a vulnerability where an attacker may cause an LDAP user injection. A successful exploit of this vulnerability may lead to information disclosure. |
| The secret value used for access to critical UDS services of the MIB3 infotainment is hardcoded in the firmware.
Vulnerability discovered on Škoda Superb III (3V3) - 2.0 TDI manufactured in 2022.
|
| Nginx-ui is online statistics for Server Indicators Monitor CPU usage, memory usage, load average, and disk usage in real-time. The `Home > Preference` page exposes a small list of nginx settings such as `Nginx Access Log Path` and `Nginx Error Log Path`. However, the API also exposes `test_config_cmd`, `reload_cmd` and `restart_cmd`. While the UI doesn't allow users to modify any of these settings, it is possible to do so by sending a request to the API. This issue may lead to authenticated Remote Code Execution, Privilege Escalation, and Information Disclosure. This issue has been patched in version 2.0.0.beta.9. |
| Authentik is an open-source Identity Provider. Authentik is a vulnerable to a reflected Cross-Site Scripting vulnerability via JavaScript-URIs in OpenID Connect flows with `response_mode=form_post`. This relatively user could use the described attacks to perform a privilege escalation. This vulnerability has been patched in versions 2023.10.6 and 2023.8.6. |
| The application is vulnerable to Stored Cross-Site Scripting (XSS) in the endpoint /sofer/DocumentService.asc/SaveAnnotation, where input data transmitted via the POST method in the parameters author and text are not adequately sanitized and validated. This allows for the injection of malicious JavaScript code. The vulnerability was identified in the function for adding new annotations while editing document content.
Reporters inform that the vulnerability has been removed in software versions above 11.1.x. Previous versions may also be vulnerable, but this has not been confirmed.
|
| Triangle MicroWorks SCADA Data Gateway Use of Hard-coded Credentials Authentication Bypass Vulnerability. This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of Triangle MicroWorks SCADA Data Gateway. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of certificates. The service uses a hard-coded default SSL certificate. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-20509. |
| Triangle MicroWorks SCADA Data Gateway DbasSectorFileToExecuteOnReset Exposed Dangerous Function Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Triangle MicroWorks SCADA Data Gateway. Authentication is required to exploit this vulnerability.
The specific flaw exists within the handling of DbasSectorFileToExecuteOnReset parameter. The issue results from an exposed dangerous function. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-20799. |
| HCL BigFix Compliance is affected by a missing X-Frame-Options HTTP header which can allow an attacker to create a malicious website that embeds the target website in a frame or iframe, tricking users into performing actions on the target website without their knowledge. |
| The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request. |
| The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request. |
| The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request. |
| The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request. |
| The vulnerability allows an unauthenticated remote attacker to send malicious network requests containing arbitrary client-side script code and obtain its execution inside a victim’s session via a crafted URL, HTTP request, or simply by waiting for the victim to view the poisoned log. |
| The vulnerability allows a remote attacker to inject and execute arbitrary client-side script code inside a victim’s session via a crafted URL or HTTP request. |
| The vulnerability allows a remote attacker to authenticate to the SSH service with root privileges through a hidden hard-coded account. |
