| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When ssl was enabled for Mongo Hook, default settings included "allow_insecure" which caused that certificates were not validated. This was unexpected and undocumented.
Users are recommended to upgrade to version 4.0.0, which fixes this issue. |
| Typecho v1.3.0 was discovered to contain a Client IP Spoofing vulnerability, which allows attackers to falsify their IP addresses by specifying an arbitrary IP as value of X-Forwarded-For or Client-Ip headers while performing HTTP requests. |
| In Botan before 2.19.3, it is possible to forge OCSP responses due to a certificate verification error. This issue was introduced in Botan 1.11.34 (November 2016). |
| Velneo vClient on its 28.1.3 version, could allow an attacker with knowledge of the victims's username and hashed password to spoof the victim's id against the server. |
| All versions of the package github.com/greenpau/caddy-security are vulnerable to Authentication Bypass by Spoofing via the X-Forwarded-For header due to improper input sanitization. An attacker can spoof an IP address used in the user identity module (/whoami API endpoint). This could lead to unauthorized access if the system trusts this spoofed IP address. |
| Session information easily guessable vulnerability exists in Kyocera Document Solutions MFPs and printers, which may allow a network-adjacent attacker to log in to the product by spoofing a user with guessed session information. Affected products/versions are as follows: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 255c/205c, TASKalfa 256ci/206ci, ECOSYS M6526cdn/M6526cidn, FS-C2126MFP/C2126MFP+/C2026MFP/C2026MFP+, TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, TASKalfa 305/255, TASKalfa 306i/256i, LS-3140MFP/3140MFP+/3640MFP, ECOSYS M2535dn, LS-1135MFP/1035MFP, LS-C8650DN/C8600DN, ECOSYS P6026cdn, FS-C5250DN, LS-4300DN/4200DN/2100DN, ECOSYS P4040dn, ECOSYS P2135dn, and FS-1370DN. |
| A lack of rate limiting in the 'Forgot Password' feature of PHPJabbers Cleaning Business Software v1.0 allows attackers to send an excessive amount of email for a legitimate user, leading to a possible Denial of Service (DoS) via a large amount of generated e-mail messages. |
| A lack of rate limiting in the 'Forgot Password' feature of PHPJabbers Cleaning Business Software v1.0 allows attackers to send an excessive amount of email for a legitimate user, leading to a possible Denial of Service (DoS) via a large amount of generated e-mail messages. |
| Adobe Experience Manager version 6.5.9.0 (and earlier) is affected by a improper certificate validation vulnerability in the cold storage component. If an attacker can achieve a man in the middle when the cold server establishes a new certificate, they would be able to harvest sensitive information. |
| Traefik is an HTTP reverse proxy and load balancer. Prior to version 2.6.1, Traefik skips the router transport layer security (TLS) configuration when the host header is a fully qualified domain name (FQDN). For a request, the TLS configuration choice can be different than the router choice, which implies the use of a wrong TLS configuration. When sending a request using FQDN handled by a router configured with a dedicated TLS configuration, the TLS configuration falls back to the default configuration that might not correspond to the configured one. If the CNAME flattening is enabled, the selected TLS configuration is the SNI one and the routing uses the CNAME value, so this can skip the expected TLS configuration. Version 2.6.1 contains a patch for this issue. As a workaround, one may add the FDQN to the host rule. However, there is no workaround if the CNAME flattening is enabled. |
| Cosign provides container signing, verification, and storage in an OCI registry for the sigstore project. Prior to version 1.5.2, Cosign can be manipulated to claim that an entry for a signature exists in the Rekor transparency log even if it doesn't. This requires the attacker to have pull and push permissions for the signature in OCI. This can happen with both standard signing with a keypair and "keyless signing" with Fulcio. If an attacker has access to the signature in OCI, they can manipulate cosign into believing the entry was stored in Rekor even though it wasn't. The vulnerability has been patched in v1.5.2 of Cosign. The `signature` in the `signedEntryTimestamp` provided by Rekor is now compared to the `signature` that is being verified. If these don't match, then an error is returned. If a valid bundle is copied to a different signature, verification should fail. Cosign output now only informs the user that certificates were verified if a certificate was in fact verified. There is currently no known workaround. |
| Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted. |
| Envoy is an open source edge and service proxy, designed for cloud-native applications. In affected versions Envoy does not restrict the set of certificates it accepts from the peer, either as a TLS client or a TLS server, to only those certificates that contain the necessary extendedKeyUsage (id-kp-serverAuth and id-kp-clientAuth, respectively). This means that a peer may present an e-mail certificate (e.g. id-kp-emailProtection), either as a leaf certificate or as a CA in the chain, and it will be accepted for TLS. This is particularly bad when combined with the issue described in pull request #630, in that it allows a Web PKI CA that is intended only for use with S/MIME, and thus exempted from audit or supervision, to issue TLS certificates that will be accepted by Envoy. As a result Envoy will trust upstream certificates that should not be trusted. There are no known workarounds to this issue. Users are advised to upgrade. |
| Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade. |
| next-auth v3 users before version 3.29.2 are impacted. next-auth version 4 users before version 4.3.2 are also impacted. Upgrading to 3.29.2 or 4.3.2 will patch this vulnerability. If you are not able to upgrade for any reason, you can add a configuration to your callbacks option. If you already have a `redirect` callback, make sure that you match the incoming `url` origin against the `baseUrl`. |
| Improper validation of the Apple certificate URL in the Apple Game Center authentication adapter allows attackers to bypass authentication, making the server vulnerable to DoS attacks. The vulnerability has been fixed by improving the URL validation and adding additional checks of the resource the URL points to before downloading it. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. A vulnerability was found in Argo CD prior to versions 2.3.4, 2.2.9, and 2.1.15 that allows an attacker to spoof error messages on the login screen when single sign on (SSO) is enabled. In order to exploit this vulnerability, an attacker would have to trick the victim to visit a specially crafted URL which contains the message to be displayed. As far as the research of the Argo CD team concluded, it is not possible to specify any active content (e.g. Javascript) or other HTML fragments (e.g. clickable links) in the spoofed message. A patch for this vulnerability has been released in Argo CD versions 2.3.4, 2.2.9, and 2.1.15. There are currently no known workarounds. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. A critical vulnerability has been discovered in Argo CD starting with version 1.4.0 and prior to versions 2.1.15, 2.2.9, and 2.3.4 which would allow unauthenticated users to impersonate as any Argo CD user or role, including the `admin` user, by sending a specifically crafted JSON Web Token (JWT) along with the request. In order for this vulnerability to be exploited, anonymous access to the Argo CD instance must have been enabled. In a default Argo CD installation, anonymous access is disabled. The vulnerability can be exploited to impersonate as any user or role, including the built-in `admin` account regardless of whether it is enabled or disabled. Also, the attacker does not need an account on the Argo CD instance in order to exploit this. If anonymous access to the instance is enabled, an attacker can escalate their privileges, effectively allowing them to gain the same privileges on the cluster as the Argo CD instance, which is cluster admin in a default installation. This will allow the attacker to create, manipulate and delete any resource on the cluster. They may also exfiltrate data by deploying malicious workloads with elevated privileges, thus bypassing any redaction of sensitive data otherwise enforced by the Argo CD API. A patch for this vulnerability has been released in Argo CD versions 2.3.4, 2.2.9, and 2.1.15. As a workaround, one may disable anonymous access, but upgrading to a patched version is preferable. |
| Pion DTLS is a Go implementation of Datagram Transport Layer Security. Prior to version 2.1.5, a DTLS Client could provide a Certificate that it doesn't posses the private key for and Pion DTLS wouldn't reject it. This issue affects users that are using Client certificates only. The connection itself is still secure. The Certificate provided by clients can't be trusted when using a Pion DTLS server prior to version 2.1.5. Users should upgrade to version 2.1.5 to receive a patch. There are currently no known workarounds. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 4.10.11 and 5.2.2, the certificate in the Parse Server Apple Game Center auth adapter not validated. As a result, authentication could potentially be bypassed by making a fake certificate accessible via certain Apple domains and providing the URL to that certificate in an authData object. Versions 4.0.11 and 5.2.2 prevent this by introducing a new `rootCertificateUrl` property to the Parse Server Apple Game Center auth adapter which takes the URL to the root certificate of Apple's Game Center authentication certificate. If no value is set, the `rootCertificateUrl` property defaults to the URL of the current root certificate as of May 27, 2022. Keep in mind that the root certificate can change at any time and that it is the developer's responsibility to keep the root certificate URL up-to-date when using the Parse Server Apple Game Center auth adapter. There are no known workarounds for this issue. |
