In Xpdf 4.01.01, a heap-based buffer over-read could be triggered in strncpy from FoFiType1::parse in fofi/FoFiType1.cc because it does not ensure the source string has a valid length before making a fixed-length copy. It can, for example, be triggered by sending a crafted PDF document to the pdftotext tool. It allows an attacker to use a crafted pdf file to cause Denial of Service or an information leak, or possibly have unspecified other impact.

In Xpdf 4.01.01, a heap-based buffer over-read could be triggered in SampledFunction::transform in Function.cc when using a large index for samples. It can, for example, be triggered by sending a crafted PDF document to the pdftotext tool. It allows an attacker to use a crafted pdf file to cause Denial of Service or an information leak, or possibly have unspecified other impact.

In Xpdf 4.01.01, a heap-based buffer overflow could be triggered in DCTStream::decodeImage() in Stream.cc when writing to frameBuf memory. It can, for example, be triggered by sending a crafted PDF document to the pdftotext tool. It allows an attacker to use a crafted pdf file to cause Denial of Service, an information leak, or possibly unspecified other impact.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains a stack-based buffer overflow while returning an error message to the user about failure to resolve a hostname during a ping or traceroute attempt. This allows an authenticated user to execute arbitrary code. The exploit can be exercised on the local intranet or remotely if remote administration is enabled.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains multiple stack-based buffer overflows when processing user input for the setup wizard, allowing an unauthenticated user to execute arbitrary code. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains multiple command injections when processing user input for the setup wizard, allowing an unauthenticated user to run arbitrary commands on the device. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 allows an unauthenticated attacker to execute setup wizard functionality, giving this attacker the ability to change configuration values, potentially leading to a denial of service. The request can be made on the local intranet or remotely if remote administration is enabled.

TRENDnet TEW-827DRU with firmware up to and including 2.04B03 contains a stack-based buffer overflow in the ssi binary. The overflow allows an unauthenticated user to execute arbitrary code by providing a sufficiently long query string when POSTing to any valid cgi, txt, asp, or js file. The vulnerability can be exercised on the local intranet or remotely if remote administration is enabled.

An issue was discovered in the VeronaLabs wp-statistics plugin before 12.6.7 for WordPress. The v1/hit endpoint of the API, when the non-default "use cache plugin" setting is enabled, is vulnerable to unauthenticated blind SQL Injection.

In Xymon through 4.3.28, an XSS vulnerability exists in the csvinfo CGI script due to insufficient filtering of the db parameter.

In Xymon through 4.3.28, a buffer overflow vulnerability exists in the csvinfo CGI script. The overflow may be exploited by sending a crafted GET request that triggers an sprintf of the srcdb parameter.

Edimax BR-6208AC V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. They forward ARP requests, which are sent as broadcast packets, between the host and the guest networks. To use this leakage as a direct covert channel, the sender can trivially issue an ARP request to an arbitrary computer on the network. (In general, some routers restrict ARP forwarding only to requests destined for the network's subnet mask, but these routers did not restrict this traffic in any way. Depending on this factor, one must use either the lower 8 bits of the IP address, or the entire 32 bits, as the data payload.)

Edimax BR-6208AC V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. In order to transfer data from the host network to the guest network, the sender joins and then leaves an IGMP group. After it leaves, the router (following the IGMP protocol) creates an IGMP Membership Query packet with the Group IP and sends it to both the Host and the Guest networks. The data is transferred within the Group IP field, which is completely controlled by the sender.

Edimax BR-6208AC V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.

TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. They forward ARP requests, which are sent as broadcast packets, between the host and the guest networks. To use this leakage as a direct covert channel, the sender can trivially issue an ARP request to an arbitrary computer on the network. (In general, some routers restrict ARP forwarding only to requests destined for the network's subnet mask, but these routers did not restrict this traffic in any way. Depending on this factor, one must use either the lower 8 bits of the IP address, or the entire 32 bits, as the data payload.)

TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. In order to transfer data from the host network to the guest network, the sender joins and then leaves an IGMP group. After it leaves, the router (following the IGMP protocol) creates an IGMP Membership Query packet with the Group IP and sends it to both the Host and the Guest networks. The data is transferred within the Group IP field, which is completely controlled by the sender.

TP-Link Archer C3200 V1 and Archer C2 V1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. They forward ARP requests, which are sent as broadcast packets, between the host and the guest networks. To use this leakage as a direct covert channel, the sender can trivially issue an ARP request to an arbitrary computer on the network. (In general, some routers restrict ARP forwarding only to requests destined for the network's subnet mask, but these routers did not restrict this traffic in any way. Depending on this factor, one must use either the lower 8 bits of the IP address, or the entire 32 bits, as the data payload.)

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. In order to transfer data from the host network to the guest network, the sender joins and then leaves an IGMP group. After it leaves, the router (following the IGMP protocol) creates an IGMP Membership Query packet with the Group IP and sends it to both the Host and the Guest networks. The data is transferred within the Group IP field, which is completely controlled by the sender.

D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field.