| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
When user_dlm_destroy_lock failed, it didn't clean up the flags it set
before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of
lock is still in used, next time when unlink invokes this function, it
will return succeed, and then unlink will remove inode and dentry if lock
is not in used(file closed), but the dlm lock is still linked in dlm lock
resource, then when bast come in, it will trigger a panic due to
user-after-free. See the following panic call trace. To fix this,
USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should
be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink
fail.
For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN,
USER_LOCK_BUSY is also required to be cleared. Even though spin lock is
released in between, but USER_LOCK_IN_TEARDOWN is still set, for
USER_LOCK_BUSY, if before every place that waits on this flag,
USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow
waits on the busy flag set by user_dlm_destroy_lock(), then we can
simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix
user_dlm_cluster_lock() which is the only function not following this.
[ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink
004fb0000060000b5a90b8c847b72e1, error -16 from destroy
[ 989.757536] ------------[ cut here ]------------
[ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173!
[ 989.757876] invalid opcode: 0000 [#1] SMP
[ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O)
ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc
xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5
auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs
ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc
fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc
rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad
rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE)
mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad
ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support
pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si
ipmi_msghandler
[ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp
pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel
be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio
libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi
dm_mirror dm_region_hash dm_log dm_mod [last unloaded:
ksplice_2zhuk2jr_ib_ipoib_old]
[ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE
4.1.12-124.57.1.el6uek.x86_64 #2
[ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER
X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021
[ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti:
ffff88017f7c8000
[ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>]
__user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs]
[ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246
[ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX:
0000000000000003
[ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI:
ffff880174d48170
[ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09:
0000000000000000
[ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12:
ffff880174d48008
[ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15:
ffff88021db7a000
[ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000)
knlGS:ffff880247480000
[ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4:
0000000000042660
[ 989.765081] Stack:
[ 989.765167] 00000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: add accessors to read/set tp->snd_cwnd
We had various bugs over the years with code
breaking the assumption that tp->snd_cwnd is greater
than zero.
Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added
in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction")
can trigger, and without a repro we would have to spend
considerable time finding the bug.
Instead of complaining too late, we want to catch where
and when tp->snd_cwnd is set to an illegal value. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
There is a deadlock in rtllib_beacons_stop(), which is shown
below:
(Thread 1) | (Thread 2)
| rtllib_send_beacon()
rtllib_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rtllib_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
There is a deadlock in oxu_bus_suspend(), which is shown below:
(Thread 1) | (Thread 2)
| timer_action()
oxu_bus_suspend() | mod_timer()
spin_lock_irq() //(1) | (wait a time)
... | oxu_watchdog()
del_timer_sync() | spin_lock_irq() //(2)
(wait timer to stop) | ...
We hold oxu->lock in position (1) of thread 1, and use
del_timer_sync() to wait timer to stop, but timer handler
also need oxu->lock in position (2) of thread 2. As a result,
oxu_bus_suspend() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irq(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192u: Fix deadlock in ieee80211_beacons_stop()
There is a deadlock in ieee80211_beacons_stop(), which is shown below:
(Thread 1) | (Thread 2)
| ieee80211_send_beacon()
ieee80211_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | ieee80211_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, ieee80211_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
There is a deadlock in sa1100_set_termios(), which is shown
below:
(Thread 1) | (Thread 2)
| sa1100_enable_ms()
sa1100_set_termios() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | sa1100_timeout()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold sport->port.lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need sport->port.lock in position (2) of thread 2. As a result,
sa1100_set_termios() will block forever.
This patch moves del_timer_sync() before spin_lock_irqsave()
in order to prevent the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8192eu: Fix deadlock in rtw_joinbss_event_prehandle
There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_joinbss_event_prehandle()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_join_timeout_handler()
| _rtw_join_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't BUG if someone dirty pages without asking ext4 first
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Ignore multiple conn complete events
When one of the three connection complete events is received multiple
times for the same handle, the device is registered multiple times which
leads to memory corruptions. Therefore, consequent events for a single
connection are ignored.
The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET
is introduced to identify new connections. To make sure the events do not
contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks
are introduced.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: get rid of warning on transaction commit when using flushoncommit
When using the flushoncommit mount option, during almost every transaction
commit we trigger a warning from __writeback_inodes_sb_nr():
$ cat fs/fs-writeback.c:
(...)
static void __writeback_inodes_sb_nr(struct super_block *sb, ...
{
(...)
WARN_ON(!rwsem_is_locked(&sb->s_umount));
(...)
}
(...)
The trace produced in dmesg looks like the following:
[947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3
[947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif
[947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 #186
[947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3
[947.502097] Code: 24 10 4c 89 44 24 18 c6 (...)
[947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246
[947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000
[947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50
[947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000
[947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488
[947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460
[947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000
[947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0
[947.571072] Call Trace:
[947.572354] <TASK>
[947.573266] btrfs_commit_transaction+0x1f1/0x998
[947.576785] ? start_transaction+0x3ab/0x44e
[947.579867] ? schedule_timeout+0x8a/0xdd
[947.582716] transaction_kthread+0xe9/0x156
[947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407
[947.590104] kthread+0x131/0x139
[947.592168] ? set_kthread_struct+0x32/0x32
[947.595174] ret_from_fork+0x22/0x30
[947.597561] </TASK>
[947.598553] ---[ end trace 644721052755541c ]---
This is because we started using writeback_inodes_sb() to flush delalloc
when committing a transaction (when using -o flushoncommit), in order to
avoid deadlocks with filesystem freeze operations. This change was made
by commit ce8ea7cc6eb313 ("btrfs: don't call btrfs_start_delalloc_roots
in flushoncommit"). After that change we started producing that warning,
and every now and then a user reports this since the warning happens too
often, it spams dmesg/syslog, and a user is unsure if this reflects any
problem that might compromise the filesystem's reliability.
We can not just lock the sb->s_umount semaphore before calling
writeback_inodes_sb(), because that would at least deadlock with
filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem()
is called while we are holding that semaphore in write mode, and that can
trigger a transaction commit, resulting in a deadlock. It would also
trigger the same type of deadlock in the unmount path. Possibly, it could
also introduce some other locking dependencies that lockdep would report.
To fix this call try_to_writeback_inodes_sb() instead of
writeback_inodes_sb(), because that will try to read lock sb->s_umount
and then will only call writeback_inodes_sb() if it was able to lock it.
This is fine because the cases where it can't read lock sb->s_umount
are during a filesystem unmount or during a filesystem freeze - in those
cases sb->s_umount is write locked and sync_filesystem() is called, which
calls writeback_inodes_sb(). In other words, in all cases where we can't
take a read lock on sb->s_umount, writeback is already being triggered
elsewhere.
An alternative would be to call btrfs_start_delalloc_roots() with a
number of pages different from LONG_MAX, for example matching the number
of delalloc bytes we currently have, in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix deadlock on DSI device attach error
DSI device attach to DSI host will be done with host device's lock
held.
Un-registering host in "device attach" error path (ex: probe retry)
will result in deadlock with below call trace and non operational
DSI display.
Startup Call trace:
[ 35.043036] rt_mutex_slowlock.constprop.21+0x184/0x1b8
[ 35.043048] mutex_lock_nested+0x7c/0xc8
[ 35.043060] device_del+0x4c/0x3e8
[ 35.043075] device_unregister+0x20/0x40
[ 35.043082] mipi_dsi_remove_device_fn+0x18/0x28
[ 35.043093] device_for_each_child+0x68/0xb0
[ 35.043105] mipi_dsi_host_unregister+0x40/0x90
[ 35.043115] vc4_dsi_host_attach+0xf0/0x120 [vc4]
[ 35.043199] mipi_dsi_attach+0x30/0x48
[ 35.043209] tc358762_probe+0x128/0x164 [tc358762]
[ 35.043225] mipi_dsi_drv_probe+0x28/0x38
[ 35.043234] really_probe+0xc0/0x318
[ 35.043244] __driver_probe_device+0x80/0xe8
[ 35.043254] driver_probe_device+0xb8/0x118
[ 35.043263] __device_attach_driver+0x98/0xe8
[ 35.043273] bus_for_each_drv+0x84/0xd8
[ 35.043281] __device_attach+0xf0/0x150
[ 35.043290] device_initial_probe+0x1c/0x28
[ 35.043300] bus_probe_device+0xa4/0xb0
[ 35.043308] deferred_probe_work_func+0xa0/0xe0
[ 35.043318] process_one_work+0x254/0x700
[ 35.043330] worker_thread+0x4c/0x448
[ 35.043339] kthread+0x19c/0x1a8
[ 35.043348] ret_from_fork+0x10/0x20
Shutdown Call trace:
[ 365.565417] Call trace:
[ 365.565423] __switch_to+0x148/0x200
[ 365.565452] __schedule+0x340/0x9c8
[ 365.565467] schedule+0x48/0x110
[ 365.565479] schedule_timeout+0x3b0/0x448
[ 365.565496] wait_for_completion+0xac/0x138
[ 365.565509] __flush_work+0x218/0x4e0
[ 365.565523] flush_work+0x1c/0x28
[ 365.565536] wait_for_device_probe+0x68/0x158
[ 365.565550] device_shutdown+0x24/0x348
[ 365.565561] kernel_restart_prepare+0x40/0x50
[ 365.565578] kernel_restart+0x20/0x70
[ 365.565591] __do_sys_reboot+0x10c/0x220
[ 365.565605] __arm64_sys_reboot+0x2c/0x38
[ 365.565619] invoke_syscall+0x4c/0x110
[ 365.565634] el0_svc_common.constprop.3+0xfc/0x120
[ 365.565648] do_el0_svc+0x2c/0x90
[ 365.565661] el0_svc+0x4c/0xf0
[ 365.565671] el0t_64_sync_handler+0x90/0xb8
[ 365.565682] el0t_64_sync+0x180/0x184 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Fix hang in usb_kill_urb by adding memory barriers
The syzbot fuzzer has identified a bug in which processes hang waiting
for usb_kill_urb() to return. It turns out the issue is not unlinking
the URB; that works just fine. Rather, the problem arises when the
wakeup notification that the URB has completed is not received.
The reason is memory-access ordering on SMP systems. In outline form,
usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on
different CPUs perform the following actions:
CPU 0 CPU 1
---------------------------- ---------------------------------
usb_kill_urb(): __usb_hcd_giveback_urb():
... ...
atomic_inc(&urb->reject); atomic_dec(&urb->use_count);
... ...
wait_event(usb_kill_urb_queue,
atomic_read(&urb->use_count) == 0);
if (atomic_read(&urb->reject))
wake_up(&usb_kill_urb_queue);
Confining your attention to urb->reject and urb->use_count, you can
see that the overall pattern of accesses on CPU 0 is:
write urb->reject, then read urb->use_count;
whereas the overall pattern of accesses on CPU 1 is:
write urb->use_count, then read urb->reject.
This pattern is referred to in memory-model circles as SB (for "Store
Buffering"), and it is well known that without suitable enforcement of
the desired order of accesses -- in the form of memory barriers -- it
is entirely possible for one or both CPUs to execute their reads ahead
of their writes. The end result will be that sometimes CPU 0 sees the
old un-decremented value of urb->use_count while CPU 1 sees the old
un-incremented value of urb->reject. Consequently CPU 0 ends up on
the wait queue and never gets woken up, leading to the observed hang
in usb_kill_urb().
The same pattern of accesses occurs in usb_poison_urb() and the
failure pathway of usb_hcd_submit_urb().
The problem is fixed by adding suitable memory barriers. To provide
proper memory-access ordering in the SB pattern, a full barrier is
required on both CPUs. The atomic_inc() and atomic_dec() accesses
themselves don't provide any memory ordering, but since they are
present, we can use the optimized smp_mb__after_atomic() memory
barrier in the various routines to obtain the desired effect.
This patch adds the necessary memory barriers. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock between quota disable and qgroup rescan worker
Quota disable ioctl starts a transaction before waiting for the qgroup
rescan worker completes. However, this wait can be infinite and results
in deadlock because of circular dependency among the quota disable
ioctl, the qgroup rescan worker and the other task with transaction such
as block group relocation task.
The deadlock happens with the steps following:
1) Task A calls ioctl to disable quota. It starts a transaction and
waits for qgroup rescan worker completes.
2) Task B such as block group relocation task starts a transaction and
joins to the transaction that task A started. Then task B commits to
the transaction. In this commit, task B waits for a commit by task A.
3) Task C as the qgroup rescan worker starts its job and starts a
transaction. In this transaction start, task C waits for completion
of the transaction that task A started and task B committed.
This deadlock was found with fstests test case btrfs/115 and a zoned
null_blk device. The test case enables and disables quota, and the
block group reclaim was triggered during the quota disable by chance.
The deadlock was also observed by running quota enable and disable in
parallel with 'btrfs balance' command on regular null_blk devices.
An example report of the deadlock:
[372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds.
[372.479944] Not tainted 5.16.0-rc8 #7
[372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000
[372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs]
[372.510782] Call Trace:
[372.514092] <TASK>
[372.521684] __schedule+0xb56/0x4850
[372.530104] ? io_schedule_timeout+0x190/0x190
[372.538842] ? lockdep_hardirqs_on+0x7e/0x100
[372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[372.555591] schedule+0xe0/0x270
[372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs]
[372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs]
[372.578875] ? free_unref_page+0x3f2/0x650
[372.585484] ? finish_wait+0x270/0x270
[372.591594] ? release_extent_buffer+0x224/0x420 [btrfs]
[372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs]
[372.607157] ? lock_release+0x3a9/0x6d0
[372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs]
[372.620960] ? do_raw_spin_lock+0x11e/0x250
[372.627137] ? rwlock_bug.part.0+0x90/0x90
[372.633215] ? lock_is_held_type+0xe4/0x140
[372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs]
[372.646268] process_one_work+0x7e9/0x1320
[372.652321] ? lock_release+0x6d0/0x6d0
[372.658081] ? pwq_dec_nr_in_flight+0x230/0x230
[372.664513] ? rwlock_bug.part.0+0x90/0x90
[372.670529] worker_thread+0x59e/0xf90
[372.676172] ? process_one_work+0x1320/0x1320
[372.682440] kthread+0x3b9/0x490
[372.687550] ? _raw_spin_unlock_irq+0x24/0x50
[372.693811] ? set_kthread_struct+0x100/0x100
[372.700052] ret_from_fork+0x22/0x30
[372.705517] </TASK>
[372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds.
[372.729827] Not tainted 5.16.0-rc8 #7
[372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000
[372.787776] Call Trace:
[372.801652] <TASK>
[372.812961] __schedule+0xb56/0x4850
[372.830011] ? io_schedule_timeout+0x190/0x190
[372.852547] ? lockdep_hardirqs_on+0x7e/0x100
[372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60
[372.886792] schedule+0xe0/0x270
[372.901685] wait_current_trans+0x22c/0x310 [btrfs]
[372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs]
[372.938923] ? finish_wait+0x270/0x270
[372.959085] ? join_transaction+0xc7
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid scanning potential huge holes
When using devm_request_free_mem_region() and devm_memremap_pages() to
add ZONE_DEVICE memory, if requested free mem region's end pfn were
huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see
move_pfn_range_to_zone()). Thus it creates a huge hole between
node_start_pfn() and node_end_pfn().
We found on some AMD APUs, amdkfd requested such a free mem region and
created a huge hole. In such a case, following code snippet was just
doing busy test_bit() looping on the huge hole.
for (pfn = start_pfn; pfn < end_pfn; pfn++) {
struct page *page = pfn_to_online_page(pfn);
if (!page)
continue;
...
}
So we got a soft lockup:
watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221]
CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1
RIP: 0010:pfn_to_online_page+0x5/0xd0
Call Trace:
? kmemleak_scan+0x16a/0x440
kmemleak_write+0x306/0x3a0
? common_file_perm+0x72/0x170
full_proxy_write+0x5c/0x90
vfs_write+0xb9/0x260
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
I did some tests with the patch.
(1) amdgpu module unloaded
before the patch:
real 0m0.976s
user 0m0.000s
sys 0m0.968s
after the patch:
real 0m0.981s
user 0m0.000s
sys 0m0.973s
(2) amdgpu module loaded
before the patch:
real 0m35.365s
user 0m0.000s
sys 0m35.354s
after the patch:
real 0m1.049s
user 0m0.000s
sys 0m1.042s |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent kernel bug at submit_bh_wbc()
Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently. If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.
This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail. |
| A vulnerability has been identified in Genexis Platinum P4410 router (Firmware P4410-V2–1.41) that allows a local network attacker to achieve Remote Code Execution (RCE) with root privileges. The issue occurs due to improper session invalidation after administrator logout. When an administrator logs out, the session token remains valid. An attacker on the local network can reuse this stale token to send crafted requests via the router’s diagnostic endpoint, resulting in command execution as root. |
| urllib3 is a user-friendly HTTP client library for Python. Starting in version 2.2.0 and prior to 2.5.0, urllib3 does not control redirects in browsers and Node.js. urllib3 supports being used in a Pyodide runtime utilizing the JavaScript Fetch API or falling back on XMLHttpRequest. This means Python libraries can be used to make HTTP requests from a browser or Node.js. Additionally, urllib3 provides a mechanism to control redirects, but the retries and redirect parameters are ignored with Pyodide; the runtime itself determines redirect behavior. This issue has been patched in version 2.5.0. |
| urllib3 is a user-friendly HTTP client library for Python. Prior to 2.5.0, it is possible to disable redirects for all requests by instantiating a PoolManager and specifying retries in a way that disable redirects. By default, requests and botocore users are not affected. An application attempting to mitigate SSRF or open redirect vulnerabilities by disabling redirects at the PoolManager level will remain vulnerable. This issue has been patched in version 2.5.0. |
| Tornado is a Python web framework and asynchronous networking library. In versions 6.5.2 and below, the supplied reason phrase is used unescaped in HTTP headers (where it could be used for header injection) or in HTML in the default error page (where it could be used for XSS) and can be exploited by passing untrusted or malicious data into the reason argument. Used by both RequestHandler.set_status and tornado.web.HTTPError, the argument is designed to allow applications to pass custom "reason" phrases (the "Not Found" in HTTP/1.1 404 Not Found) to the HTTP status line (mainly for non-standard status codes). This issue is fixed in version 6.5.3. |
| Edge3 Worker RPC RCE on Airflow 2.
This issue affects Apache Airflow Providers Edge3: before 2.0.0 - and only if you installed and configured it on Airflow 2.
The Edge3 provider support in Airflow 2 has been always development-only and not officially released, however if you installed and configured Edge3 provider in Airflow 2, it implicitly enabled non-public (normally) API which was used to test Edge Provider in Airflow 2 during the development. This API allowed Dag author to perform Remote Code Execution in the webserver context, which Dag Author was not supposed to be able to do.
If you installed and configured Edge3 provider for Airflow 2, you should uninstall it and migrate to Airflow 3. The new Edge3 provider versions (>=2.0.0) has minimum version of Airflow set to 3 and the RCE-prone Airflow 2 code is removed, so it should no longer be possible to use the Edge3 provider 2.0.0+ on Airflow 2.
If you used Edge Provider in Airflow 3, you are not affected. |
