| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A prior update that raised a bundled HTTP client library to a version remediating known vulnerabilities was later reverted, reintroducing the earlier, vulnerable version into a log-processing component. The only code path in that component using the library issues a request to a single fixed, trusted vendor URL at initialization and does not process attacker-controlled input through the library, limiting practical exploitability of the reintroduced version in this context. |
| An example environment-configuration file for a bundled inventory-management component ships with a fixed, publicly-known administrative password. A deployment that copies this example file into active configuration without running the setup routine that regenerates credentials will expose that component's administrative interface to anyone aware of the default value. |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| A weakness has been identified in lenve vhr 1.0-SNAPSHOT. This vulnerability affects the function FastDFSUtils.upload of the file /hr/userface of the component Avatar Upload. This manipulation of the argument File causes unrestricted upload. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| vLLM versions >=0.10.2 and <0.28.0 do not apply any audio decode-size or duration limit when extracting audio from video input for NanoNemotronVL models. In nano_nemotron_vl.py, _extract_audio_from_videos calls load_audio_pyav(BytesIO(video_bytes)) without the max_duration_s or max_decode_bytes parameters, so neither VLLM_MAX_AUDIO_DECODE_DURATION_S nor VLLM_MAX_AUDIO_DECODE_BYTES is enforced (unlike the direct audio upload path in AudioMediaIO). When a NanoNemotronVL model is served with use_audio_in_video=True, an attacker who supplies a small, highly compressed video as multimodal input can force the server to allocate gigabytes of memory during audio decoding, resulting in a denial of service. Fixed in vLLM 0.28.0. |
| An application programming interface endpoint accepts a user-supplied value and interpolates it directly into the path of a backend request to the underlying search and analytics data store, without restricting its contents. This allows an authenticated attacker to substitute an arbitrary backend path, causing the application's own elevated service credentials to be used against unintended internal endpoints. This could allow an attacker to enumerate or read internal configuration and administrative data from the backend data store that would otherwise be restricted. |
| A routing rule selects between two different authentication mechanisms for the same downstream service based on the value of a client-supplied request header, rather than on any property the client cannot control. An authenticated user in possession of a shared service credential can set this header to route around the primary role-based authorization check and reach the alternate path's fixed, elevated role instead. This allows a low-privileged authenticated attacker who knows the shared credential to perform actions reserved for a higher-privileged role. |
| An example environment-configuration file ships with a fixed, publicly-known secret value used to sign authentication cookies for a bundled packet-analysis component. A deployment that copies this example file into active configuration without running the setup routine that regenerates the value will use the known default, allowing an attacker aware of the default to forge valid authentication cookies for that component. |
| Concrete CMS 9 through 9.5.2 is vulnerable to Missing Authorization in the block alias route (Process::alias() in concrete/controllers/backend/block/process.php).It does not verify that the referenced block is genuinely orphaned on the target page, nor that the caller holds any permission over the source block. A user granted only an area-scoped add_block_to_area delegation on their own page can therefore pass any block ID on the site: the source block's content is duplicated into an area the rogue editor controls, disclosing that content, and the original block is then force-deleted in the same request, destroying arbitrary site content. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 5.9 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:N/VI:H/VA:H/SC:N/SI:N/SA:N. Thanks Yonatan Drori from Tenzai for reporting. |
| A security flaw has been discovered in lenve vhr 1.0-SNAPSHOT. This affects the function HrInfoController.updatePass of the file /hr/pass of the component Password Update Handler. The manipulation of the argument hrid results in improper authorization. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: don't free a hibernation slot that is in the swap cache
A slot with a folio in the swap cache is freed when the folio leaves the
cache, not when its count drops. swap_put_entries_cluster() follows that
rule. swap_free_hibernation_slot() does not, it calls
__swap_cluster_free_entries() whether or not a folio sits on the slot.
Cluster readahead can put one there. It walks a raw page_cluster sized
window of offsets around the faulting entry, and a hibernation slot passes
__swap_cache_add_check() because it is not a folio and its count is not
zero. Freeing the slot then clears the entry under that folio.
The folio is now unreachable from the swap table, and the offset goes back
to the allocator. The folio is still on the LRU though, so reclaim can
pick it up later. It then takes the old offset out of folio->swap and
overwrites the table entry there, which by then may belong to someone
else.
This bug can trigger silent memory corruption, process crashes, or data
instability across completely unrelated userspace applications - typically
occurring when uswsusp is preparing the hibernation image.
I found this while working on giving hibernation slots their own marker in
the swap table, which I had discussed with Kairui.
(https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as
I know there are no reports, so there is no Reported-by/Closes to add.
Check for a cached folio before freeing. The slot is then left in the
ordinary state where only the swap cache holds it, and it is freed when
the folio leaves the cache, either through the reclaim below or through
normal reclaim later. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: skip non-present PMDs when queueing folios
Patch series "mm: handle device-private PMDs in walk callbacks", v3.
Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support
to PMD operations") a PMD may hold a device-private swap entry whenever an
HMM-based GPU driver migrates an anonymous THP folio to device memory via
migrate_vma_pages().
pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true
for any non-present, non-none huge PMD), so several MM walk callbacks that
used to assume present THP or migration entry are now reachable with a
device-private PMD. The results range from a VM_BUG_ON() firing on debug
kernels, to an oops on a bogus vmemmap dereference, to silently isolating
an unrelated live folio from LRU in the aliasing case.
This patch (of 3):
queue_folios_pmd() is called under pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for any non-present, non-none PMD
softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding
as a hardware PFN and can return a bogus folio pointer.
Mirror queue_folios_pte_range(): handle non-present entries before looking
up a folio. Keep migration entries counted as failures, but skip other
non-present PMDs such as device-private entries.
Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio
to device memory via migrate_vma_pages(), leaving a device-private PMD.
Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node()
on that range. |
