Filtered by vendor Cisco
Subscriptions
Filtered by product Nexus 3048
Subscriptions
Total
94 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2013-1178 | 1 Cisco | 27 Cg-os, Connected Grid Router 1000, Mds 9000 and 24 more | 2024-09-17 | N/A |
| Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) 1000 devices before CG4(1) allow remote attackers to execute arbitrary code via malformed CDP packets, aka Bug IDs CSCtu10630, CSCtu10551, CSCtu10550, CSCtw56581, CSCtu10548, CSCtu10544, and CSCuf61275. | ||||
| CVE-2019-1768 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2024-09-17 | 6.7 Medium |
| A vulnerability in the implementation of a specific CLI command for Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to cause a buffer overflow condition or perform command injection. This could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to a certain CLI command. An attacker could exploit this vulnerability by including malicious input as the argument of the affected CLI command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. An attacker would need valid administrator credentials to exploit these vulnerabilities. | ||||
| CVE-2020-3120 | 1 Cisco | 144 Asr 9000v, Asr 9001, Asr 9006 and 141 more | 2024-09-17 | 6.5 Medium |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | ||||
| CVE-2020-3338 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2024-09-16 | 7.5 High |
| A vulnerability in the Protocol Independent Multicast (PIM) feature for IPv6 networks (PIM6) of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper error handling when processing inbound PIM6 packets. An attacker could exploit this vulnerability by sending multiple crafted PIM6 packets to an affected device. A successful exploit could allow the attacker to cause the PIM6 application to leak system memory. Over time, this memory leak could cause the PIM6 application to stop processing legitimate PIM6 traffic, leading to a DoS condition on the affected device. | ||||
| CVE-2020-3454 | 1 Cisco | 83 Mds 9000, Mds 9100, Mds 9134 and 80 more | 2024-09-16 | 7.2 High |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. | ||||
| CVE-2021-1590 | 1 Cisco | 103 Nexus 3000, Nexus 3048, Nexus 31108pc-v and 100 more | 2024-09-16 | 5.3 Medium |
| A vulnerability in the implementation of the system login block-for command for Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a login process to unexpectedly restart, causing a denial of service (DoS) condition. This vulnerability is due to a logic error in the implementation of the system login block-for command when an attack is detected and acted upon. An attacker could exploit this vulnerability by performing a brute-force login attack on an affected device. A successful exploit could allow the attacker to cause a login process to reload, which could result in a delay during authentication to the affected device. | ||||
| CVE-2020-3119 | 1 Cisco | 83 Nexus 3016, Nexus 3048, Nexus 3064 and 80 more | 2024-09-16 | 8.8 High |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability exists because the Cisco Discovery Protocol parser does not properly validate input for certain fields in a Cisco Discovery Protocol message. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. An successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | ||||
| CVE-2019-1690 | 1 Cisco | 100 Application Policy Infrastructure Controller, Firepower 2110, Firepower 2120 and 97 more | 2024-09-16 | 6.5 Medium |
| A vulnerability in the management interface of Cisco Application Policy Infrastructure Controller (APIC) software could allow an unauthenticated, adjacent attacker to gain unauthorized access on an affected device. The vulnerability is due to a lack of proper access control mechanisms for IPv6 link-local connectivity imposed on the management interface of an affected device. An attacker on the same physical network could exploit this vulnerability by attempting to connect to the IPv6 link-local address on the affected device. A successful exploit could allow the attacker to bypass default access control restrictions on an affected device. Cisco Application Policy Infrastructure Controller (APIC) devices running versions prior to 4.2(0.21c) are affected. | ||||
| CVE-2020-3217 | 1 Cisco | 20 Ios, Ios Xe, Ios Xr and 17 more | 2024-09-16 | 8.8 High |
| A vulnerability in the Topology Discovery Service of Cisco One Platform Kit (onePK) in Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient length restrictions when the onePK Topology Discovery Service parses Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol message to an affected device. An exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges, or to cause a process crash, which could result in a reload of the device and cause a DoS condition. | ||||
| CVE-2022-20823 | 1 Cisco | 294 Nexus 3016, Nexus 3016 Firmware, Nexus 3016q and 291 more | 2024-09-16 | 8.6 High |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. | ||||
| CVE-2019-1790 | 1 Cisco | 134 7000 10-slot, 7000 18-slot, 7000 4-slot and 131 more | 2024-09-16 | 6.7 Medium |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | ||||
| CVE-2020-3398 | 1 Cisco | 67 Nexus 3016, Nexus 3048, Nexus 3064 and 64 more | 2024-09-16 | 8.6 High |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | ||||
| CVE-2019-1769 | 1 Cisco | 67 N9k-c9504-fm-r, N9k-c9508-fm-r, N9k-x96136yc-r and 64 more | 2024-09-16 | 6.7 Medium |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | ||||
| CVE-2022-20624 | 1 Cisco | 42 N9k-c9316d-gx, N9k-c9332d-gx2b, N9k-c9348d-gx2a and 39 more | 2024-09-16 | 8.6 High |
| A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. | ||||
| CVE-2019-1968 | 1 Cisco | 92 Mds 9000, Mds 9100, Mds 9140 and 89 more | 2024-09-16 | 7.5 High |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default. | ||||
| CVE-2020-3165 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2024-09-16 | 8.2 High |
| A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network. | ||||
| CVE-2022-20625 | 1 Cisco | 110 Firepower 4110, Firepower 4112, Firepower 4115 and 107 more | 2024-09-16 | 4.3 Medium |
| A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart. | ||||
| CVE-2019-1813 | 1 Cisco | 66 9432pq, 9536pq, 9636pq and 63 more | 2024-09-16 | 6.7 Medium |
| A vulnerability in the Image Signature Verification feature of Cisco NX-OS Software could allow an authenticated, local attacker with administrator-level credentials to install a malicious software image on an affected device. The vulnerability exists because software digital signatures are not properly verified during CLI command execution. An attacker could exploit this vulnerability to install an unsigned software image on an affected device. | ||||
| CVE-2021-1229 | 1 Cisco | 86 Mds 9148s, Mds 9250i, Mds 9706 and 83 more | 2024-09-16 | 5.8 Medium |
| A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot. | ||||
| CVE-2019-1735 | 1 Cisco | 82 Mds 9000, Mds 9100, Mds 9200 and 79 more | 2024-09-16 | 7.8 High |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid user credentials to exploit this vulnerability. | ||||