| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Time-of-check time-of-use (toctou) race condition in Windows DHCP Server allows an authorized attacker to execute code over a network. |
| Time-of-check time-of-use (toctou) race condition in Windows NTFS allows an authorized attacker to perform tampering locally. |
| Time-of-check time-of-use race condition in the MigTD shared memory for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable data corruption. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Joomla Extension - j2commerce.com - Gift voucher and single-use coupon could pay for more than one order in J2Store 6.0.0 - 6.6.5 - A logged-in customer could redeem a single gift voucher, or a single-use coupon (`max_uses` / `max_customer_uses` = 1), on more than one order. By starting several checkout sessions and carrying each to the confirm step before submitting any of them, every order independently saw the voucher's full balance or the coupon's unused slot, because the balance/usage calculations and the final placement check both only looked at orders that had already left the "New" state. |
| Time-of-check time-of-use race condition for the Intel(R) VTune(TM) Profiler software before version 2026.0.0 within Ring 1: Device Drivers may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Time-of-check time-of-use race condition for the Intel(R) VTune(TM) Profiler software within Ring 1: Device Drivers may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the descriptor was readable by the calling thread (K_SYSCALL_MEMORY_READ()), read target->bus once to check it with K_SYSCALL_OBJ(), and then passed the caller's live pointer down. The implementation z_impl_i3c_transfer() re-reads target->bus from that user memory and dispatches through it as DEVICE_API_GET(i3c, target->bus)->i3c_xfers(...), so the bus that was validated is not necessarily the bus that is used. DEVICE_API_GET() performs no runtime type check outside CONFIG_DEVICE_API_ASSERT builds.
On a build with CONFIG_USERSPACE and an I3C controller driver, a user thread that has been granted an I3C device object can exploit this with a second thread in the same memory domain: one thread calls i3c_transfer() while the other rewrites the bus field of the descriptor. The window between the check and the use spans the num_msgs validation, the message-array access check, a stack VLA allocation and a memcpy() of up to 32 struct i3c_msg, so the race is repeatable and can simply be retried until it lands.
When the substitution succeeds, the kernel dereferences an attacker-chosen pointer as a struct device, loads a function pointer from the attacker-controlled api table and calls it in supervisor mode with attacker-influenced arguments. This yields kernel-mode code execution from an unprivileged user thread — a complete escape of the userspace memory-protection sandbox; lesser outcomes are an arbitrary two-level kernel read or a kernel fault. Builds without CONFIG_USERSPACE, or without an I3C driver, are unaffected.
The fix copies the descriptor into a kernel-stack local with k_usermode_from_copy(), validates the bus in that copy, and dispatches on the copy, so the validated value is provably the value used. |
| filelock is a platform-independent file lock for Python. From 3.30.0 until 4.2.1, On POSIX platforms, StrictSoftFileLock and AsyncStrictSoftFileLock validate the coordination directory in _ensure_protocol_directory but later reach the claims directory through _open_directory by pathname, allowing a local account that can rename the coordination name to swap in a symbolic link between check and use during acquisition. That race can create and leave claim files in another writable directory or strand claims in a different strict lock so the second lock times out. Separately, the claims property and force_break follow a resting symbolic link without a race when the lock user inspects or recovers the lock. Claims inspection discloses a file name to the other account only if the resulting exception text or claim_name reaches that account through a shared log, CI output, or error report. A blind force_break recovery that removes live claims from another strict lock can allow two processes into that lock's critical section; this path reaches other strict locks, not arbitrary files. This issue is fixed in version 4.2.1. |
| Time-of-check time-of-use (TOCTOU) race condition vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus MyComputer allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions.
This issue affects Pardus MyComputer: from 0.8.0 before 0.8.1. |
| A time-of-check to time-of-use (TOCTOU) race condition in the Sandisk Dashboard installer allows a local, authenticated standard user to replace an installer-staged binary in a user-writable temporary directory between validation and execution. The elevated installer then executes the attacker-controlled binary, resulting in local privilege escalation to a high-integrity (administrative) context. This issue affects Sandisk Dashboard through 5.2.2.3. |
| In server mode pgAdmin 4 validates a path a user gives for a file in their storage directory with check_access_permission() and then opened it by name. Several places opened it with a plain open() or handed the path to a utility that opened it later: the servers.json export and import and the import file listing, and the files given to pg_dump, pg_dumpall, pg_restore and psql by Backup, Restore and Import/Export Data. A symbolic link swapped in at the file or at any parent directory between the check and the open redirected the operation outside the storage directory, so a file could be written, overwritten or read, or loaded into a table, as the operating-system account running pgAdmin. A hard link to an outside file, which O_NOFOLLOW does not detect, and a FIFO, which could hang a request, had the same effect. CVE-2026-86861 fixed this for the File Manager's save_file; these were the remaining paths.
Exploitation requires creating such a link or FIFO inside the user's storage directory. pgAdmin offers no way to do so, and the per-user storage directories belong to the pgAdmin account, so this requires write access to the storage backend as a different operating-system user, for example a shared or network-mounted storage directory, and winning the race.
The fix opens each file by walking down from the storage directory one component at a time with O_NOFOLLOW, accepting only a regular file with one link, and passes the utilities the open descriptor (/dev/fd/N) on Linux. Error messages no longer include the server path.
This issue affects pgAdmin 4: before 9.19. |
| A vulnerability was identified in olivier-ls PHP-FTS up to 1.1.3. This impacts the function TrigramIndex::open of the file Storage.php. Such manipulation leads to time-of-check time-of-use. The attack needs to be performed locally. Upgrading to version 1.1.4 will fix this issue. The name of the patch is 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. Upgrading the affected component is recommended. The project maintainer explains: "[T]he attack requires write access to the index directory by a user other than the one running the application. That is a real shared-hosting scenario and worth defending against, which is why it is fixed but it is a hardening measure rather than a remotely reachable vulnerability, and the "Code Execution" impact additionally assumes the symlink target is a web-served .php file." |
| A flaw was found in the DPDK vhost library. When handling a virtio indirect descriptor table, the host reads the table length more than once from guest memory and can allocate a host copy before validating that length. A guest that changes the length between those reads, or that supplies an out-of-range next index on a small host copy in the vDPA relay path, can cause the host vhost process to walk past the validated mapping or heap copy. That can crash or disrupt the vhost process. Out-of-bounds bytes are consumed as descriptor fields for GPA translation and are not returned to the guest as payload. This is a residual issue in the non-contiguous indirect descriptor copy path introduced as part of the CVE-2018-1059 fix. |
| A flaw was found in DPDK lib/vhost vhost-crypto. The indirect-descriptor snapshot double-fetches a guest descriptor next index, allowing a malicious guest to cause an out-of-bounds access in the host backend. |
| filelock is a platform-independent file lock for Python. From 3.20.4 until 4.2.1, ReadWriteLock and AsyncReadWriteLock on Windows use _connect to attach SQLite to the lock database by pathname, allowing another local account that can create adjacent names to place a database-wal or database-journal side file before acquisition. An undeletable WAL file makes each read or write acquisition fail immediately with sqlite3.OperationalError regardless of timeout. Separately, when the database contains at least one table, a hot journal that grants the lock account modify rights can cause SQLite recovery to delete a file named by that journal only when the lock account has permission to delete the target. The issue requires a directory writable by another account, such as a shared Windows temporary directory, and does not affect private directories. This issue is fixed in version 4.2.1. |
| 2FAuth is a web app to manage Two-Factor Authentication (2FA) accounts and generate their security codes. Prior to 8.0.0, the otpauth image-fetch path validates a hostname through ValidatesUrls::isExternalHost() and then lets IconService::storeRemoteImage() resolve the same hostname again for the HTTP request. When external otpauth image fetching is enabled, an authenticated user controlling low-TTL authoritative DNS can return a public address during validation and an internal address during the later connection, bypassing the private-address deny list to reach loopback, private-network, link-local, or cloud metadata endpoints. This issue is fixed in version 8.0.0. |
| In JetBrains Datalore before 2026.4 code execution was possible in another user's computation via an init script upload race condition |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: userspace: fix use-after-free in get_local_id
In mptcp_pm_userspace_get_local_id(), the address entry is looked up under
spinlock, but its id is read after dropping the lock. A concurrent deletion
can free the entry between the unlock and the read, leading to UAF.
The race window is narrow. It was reproduced only with a locally
constructed stress test that repeatedly overlaps an MP_JOIN SYN with a
MPTCP_PM_CMD_SUBFLOW_DESTROY request.
However, the KASAN report below confirms that the race is reachable:
[ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0
...
[ 666.319401] Call Trace:
[ 666.319405] <IRQ>
[ 666.319408] dump_stack_lvl+0x53/0x70
[ 666.319412] print_address_description.constprop.0+0x2c/0x3b0
[ 666.319418] print_report+0xbe/0x2b0
[ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319423] kasan_report+0xce/0x100
[ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0
[ 666.319433] mptcp_pm_get_local_id+0x371/0x440
...
[ 666.319821] Allocated by task 45539:
[ 666.319844] kasan_save_stack+0x33/0x60
[ 666.319855] kasan_save_track+0x14/0x30
[ 666.319858] __kasan_kmalloc+0x8f/0xa0
[ 666.319863] __kmalloc_noprof+0x1e7/0x520
[ 666.319867] sock_kmalloc+0xdf/0x130
[ 666.319885] sock_kmemdup+0x1b/0x40
[ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500
[ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610
...
[ 666.319967] Freed by task 45560:
[ 666.319988] kasan_save_stack+0x33/0x60
[ 666.319991] kasan_save_track+0x14/0x30
[ 666.319994] kasan_save_free_info+0x3b/0x60
[ 666.319998] __kasan_slab_free+0x43/0x70
[ 666.320000] kfree+0x166/0x440
[ 666.320003] sock_kfree_s+0x1d/0x50
[ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200
[ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0
Fix by copying the id into a local variable while still holding the lock,
and use -1 as a "not found" sentinel. |
