| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-25, when providing invalid options to the wand option parser a small memory leak will occur. This issue has been patched in version 7.1.2-25. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, because of a missing check in the MNG coder it would be possible to read more images than the list limit policy would allow resulting in excessive resource use. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, due to a missing check in the PSD decoder it would be possible to bypass the list-length resource policy when decoding a PSD image. Other security limits would still apply. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an unauthenticated user to cause denial of service due to improper input validation in the API request parsing middleware. |
| Russh is a Rust SSH client & server library. From version 0.34.0 to before version 0.61.1, when SSH compression is enabled, russh accepted compressed packets whose on-wire size passed the normal transport packet-length checks but whose decompressed size was much larger. This allowed a remote peer to send oversized post-decompression packets that should have been rejected. In current releases, this is a remote denial-of-service / resource-exhaustion issue in the post-decompression receive path. In older releases before 0.58.0, the same remote decompression path used CryptoVec, which appears to make the historical impact worse. This issue has been patched in version 0.61.1. |
| Spring HATEOAS maintains an unbounded static cache of StringLinkRelation instances keyed on attacker-supplied strings.
Affected versions:
Spring HATEOAS 1.5.0 through 1.5.6; 2.3.0 through 2.3.4; 2.4.0 through 2.4.1; 2.5.0 through 2.5.2; 3.0.0 through 3.0.3. |
| Russh is a Rust SSH client & server library. Prior to version 0.60.3, CryptoVec used unchecked capacity growth, unchecked length arithmetic, and unsafe allocation/locking paths. In current russh releases, local SSH agent peers could still feed attacker-controlled frame lengths into buffer growth before validation. In older russh releases before 0.58.0, remote SSH traffic also reached CryptoVec through transport and compression buffers. This issue has been patched in version 0.60.3. |
| Allocation of Resources Without Limits or Throttling vulnerability in membraneframework membrane_mp4_plugin allows unauthenticated denial-of-service via BEAM atom table exhaustion.
The MP4 box header parser converts each 4-byte box name to an atom using String.to_atom/1 without validation. 'Elixir.Membrane.MP4.Container.Header':parse_box_name/1 in lib/membrane_mp4/container/header.ex interns every box name encountered while 'Elixir.Membrane.MP4.Container.Header':parse/1 walks the input. BEAM atoms are never garbage-collected, so each unique attacker-controlled 4-byte name is a permanent allocation. A crafted MP4 of approximately 8 MB containing roughly 1.1 million boxes with distinct non-standard names exhausts the atom table (default ceiling around 1,048,576 atoms), aborting the entire BEAM node and taking down all applications running on it.
This issue affects membrane_mp4_plugin from 0.3.0 before 0.36.7. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.10 before 18.10.8, 18.11 before 18.11.5, and 19.0 before 19.0.2 that under certain conditions could have allowed an authenticated user to cause denial of service due to uncontrolled resource consumption when processing a specially crafted file upload. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq()
Sashiko points out that mlx4_srq_alloc() was not undone during error
unwind, add the missing call to mlx4_srq_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
Two bugs exist in the vCPU initialisation path:
1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup
path jumps to 'unlock' without calling unpin_host_vcpu() or
unpin_host_sve_state(), permanently leaking pin references on the
host vCPU and SVE state pages.
Extract a register_hyp_vcpu() helper that performs the checks and
the store. When register_hyp_vcpu() returns an error, call
unpin_host_vcpu() and unpin_host_sve_state() inline before falling
through to the existing 'unlock' label.
2. register_hyp_vcpu() publishes the new vCPU pointer into
'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller
of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU
object.
Ensure the store uses smp_store_release() and the load uses
smp_load_acquire(). While 'vm_table_lock' currently serialises the
store and the load, these barriers ensure the reader sees the fully
initialised 'hyp_vcpu' object even if there were a lockless path or
if the lock's own ordering guarantees were insufficient for nested
object initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not
already have a dst attached. ip6_route_input_lookup() returns a
referenced dst entry even when the lookup resolves to an error route.
If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching
the dst to the skb and without releasing the reference returned by the
lookup. Repeated packets hitting this path therefore leak dst entries.
Release the dst before jumping to the drop path. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| Unbounded memory allocation in the CRYPTO frame reassembler in s2n-quic before 1.8.2 may allow an unauthenticated remote actor to cause a denial of service (degraded availability) by sending crafted QUIC Initial packets.
To remediate this issue, users should upgrade to v1.8.2. |
| Issue summary: Remote peer may exhaust heap memory of the QUIC
server or client by flooding it with packets containing PATH_CHALLENGE
frames.
Impact summary: A malicious remote peer can cause an unbounded
memory allocation which can lead to an abnormal termination of the
application acting as a QUIC client or server and a Denial of Service.
A remote peer may exhaust heap memory by flooding the local
QUIC stack with PATH_CHALLENGE frames. The local QUIC stack
allocates a PATH_RESPONSE frame for every PATH_CHALLENGE it receives.
The allocated PATH_RESPONSE frame gets freed only when the remote
peer acknowledges reception of the PATH_RESPONSE frame which will
not be done by a malicious peer.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by
this issue. The QUIC stack is outside of OpenSSL FIPS module
boundary. |
| When an application opts into DelegatingDeserializer, a producer can grow the consumer's heap without bound by sending records with unique random spring.kafka.serialization.selector header values, eventually causing GC thrash and OutOfMemoryError.
Affected versions:
Spring for Apache Kafka 4.0.0 through 4.0.5; 3.3.0 through 3.3.15; 3.2.0 through 3.2.13; 2.9.0 through 2.9.13; 2.8.0 through 2.8.11. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
