PAX Android based POS devices with PayDroid_8.1.0_Sagittarius_V11.1.45_20230314 or earlier can allow the signed partition overwrite and subsequently local code execution via hidden command. The attacker must have physical USB access to the device in order to exploit this vulnerability.
Search vulnerabilities
Persistent undocumented backdoor access in Yarbo robot
A hidden, persistent backdoor was found in Yarbo firmware v2.3.9 that provides remote, unauthenticated (or weakly authenticated) access to privileged functionality. The backdoor is undocumented, cannot be disabled via user-facing settings, and survives factory reset and ordinary firmware updates.
WattBox 800 & 820 Series < 2.10.0.0 RCE via Diagnostic Endpoints
Snap One WattBox 800 and 820 series firmware versions prior to 2.10.0.0 contain undisclosed diagnostic HTTP endpoints that require only the device MAC address and service tag for authentication, both of which are printed in plaintext on the physical device label. Attackers with access to the device label or documentation containing these values can authenticate to the several endpoints and execute arbitrary commands as root on the device.
Enable Telnet via Hidden Functionality in NEC Aterm Devices
Hidden Functionality vulnerability in NEC Platforms, Ltd. Aterm Series allows a attacker to enable telnet via network.
EFM ipTIME A8004T Debug d.cgi httpcon_check_session_url backdoor
A vulnerability was determined in EFM ipTIME A8004T 14.18.2. Affected is the function httpcon_check_session_url of the file /sess-bin/d.cgi of the component Debug Interface. This manipulation of the argument cmd causes backdoor. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected application contains a hidden configuration item to enable debug functionality. This could allow an authenticated local attacker to gain insight into the internal configuration of the deployment.
Undocumented Root Shell Access in SIMCom SIM7600G Modem
The SIMCom SIM7600G modem supports an undocumented AT command, which allows an attacker to execute system commands with root permission on the modem. An attacker needs either physical access or remote shell access to a device that interacts directly with the modem via AT commands.
MinMax CMS - Hidden Functionality
MinMax CMS from MinMax Digital Technology contains a hidden administrator account with a fixed password that cannot be removed or disabled from the management interface. Remote attackers who obtain this account can bypass IP access control restrictions and log in to the backend system without being recorded in the system logs.
Mercku M6a devices through 2.1.0 allow TELNET sessions via a router.telnet.enabled.update request by an administrator.
The "update" binary in the firmware of the affected product sends attempts to mount to a hard-coded, routable IP address, bypassing existing device network settings to do so. The function triggers if the 'C' button is pressed at a specific time during the boot process. If an attacker is able to control or impersonate this IP address, they could upload and overwrite files on the device.
Backdoor Functionality via SSH in eCharge Hardy Barth cPH2 / cPP2 charging stations
An OpenSSH daemon listens on TCP port 22. There is a hard-coded entry in the "/etc/shadow" file in the firmware image for the "root" user. However, in the default SSH configuration the "PermitRootLogin" is disabled, preventing the root user from logging in via SSH. This configuration can be bypassed/changed by an attacker through multiple paths though.
An unintended entry point vulnerability has been identified in certain router models, which may allow for arbitrary command execution. Refer to the ' 01/02/2025 ASUS Router AiCloud vulnerability' section on the ASUS Security Advisory for more information.
Longse model LBH30FE200W cameras, as well as products based on this device, provide an unrestricted access for an attacker located in the same local network to an undocumented binary service CoolView on one of the ports. An attacker with a knowledge of the available commands is able to perform read/write operations on the device's memory, which might result in e.g. bypassing telnet login and obtaining full access to the device.
Possibility to generate a session for any user via the "ex:action" parameter after obtaining access to the JWT key
An insufficiently secured internal function allows session generation for arbitrary users. The decodeParam function checks the JWT but does not verify which signing algorithm was used. As a result, an attacker can use the "ex:action" parameter in the VerifyUserByThrustedService function to generate a session for any user.
Hidden functionality issue exists in WRC-BE36QS-B and WRC-W701-B. If exploited, the product's hidden debug function may be enabled by a remote attacker who can log in to WebGUI.
Hidden functionality issue in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
Improper Validation of Integrity Check Value vulnerability in Sharp Display Solutions projectors allows a attacker may create and run unauthorized firmware.
A vulnerability has been identified in SENTRON 3KC ATC6 Expansion Module Ethernet (3KC9000-8TL75) (All versions). Affected devices expose an unused, unstable http service at port 80/tcp on the Modbus-TCP Ethernet. This could allow an attacker on the same Modbus network to create a denial of service condition that forces the device to reboot.
FNKvision Y215 CCTV Camera Telnet Sevice s1_rf_test_config backdoor
A weakness has been identified in FNKvision Y215 CCTV Camera 10.194.120.40. This vulnerability affects unknown code of the file s1_rf_test_config of the component Telnet Sevice. Executing manipulation can lead to backdoor. The physical device can be targeted for the attack. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
Elber Communications Equipment Hidden Functionality
Multiple Elber products suffer from an unauthenticated device configuration and client-side hidden functionality disclosure.