| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: skip non-present PMDs when queueing folios
Patch series "mm: handle device-private PMDs in walk callbacks", v3.
Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support
to PMD operations") a PMD may hold a device-private swap entry whenever an
HMM-based GPU driver migrates an anonymous THP folio to device memory via
migrate_vma_pages().
pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true
for any non-present, non-none huge PMD), so several MM walk callbacks that
used to assume present THP or migration entry are now reachable with a
device-private PMD. The results range from a VM_BUG_ON() firing on debug
kernels, to an oops on a bogus vmemmap dereference, to silently isolating
an unrelated live folio from LRU in the aliasing case.
This patch (of 3):
queue_folios_pmd() is called under pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for any non-present, non-none PMD
softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding
as a hardware PFN and can return a bogus folio pointer.
Mirror queue_folios_pte_range(): handle non-present entries before looking
up a folio. Keep migration entries counted as failures, but skip other
non-present PMDs such as device-private entries.
Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio
to device memory via migrate_vma_pages(), leaving a device-private PMD.
Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node()
on that range. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: fix and remove redundant unevictable folio handling
sort_folio() has a shortcut for moving folios that are no longer evictable
but are still sitting on a generation list. However, this shortcut is
buggy. It does not follow the PG_lru usage convention, and it has a more
serious issue.
Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that
folio->lru can be reused to hold folio->mlock_count (see the comment in
lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them,
and every other place that turns a folio unevictable initialises
mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and
__mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio()
sets nothing, and the lru_gen_del_folio() right above it may have already
poisoned folio->lru via list_del(), so mlock_count ends up aliasing
LIST_POISON2, which reads as 0x122, i.e. 290. The result is user
visible. On munlock, __munlock_folio() decrements that bogus count, finds
it still non-zero and bails out before clearing PG_mlocked, so the folio
remains unevictable and the Mlocked accounting stays inflated until the
folio is freed.
The shortcut also touches the LRU flags in the wrong order. It calls
lru_gen_del_folio() while PG_lru is still set, so a concurrent
folio_test_clear_lru() (e.g. compaction, folio_isolate_lru()) can succeed
on a folio that has already been taken off the generation list, which may
lead to unexpected behavior.
So fix it by isolating them as common folios and letting the generic
shrink path cull them. This matches the classical LRU behavior, and there
should be no visible effect on the generic eviction or isolation behavior.
There is no performance concern either, such a folio goes through this
once, and then it is off the generation lists for good. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
migrate_pages_batch() unmaps each folio before moving it, and every
unmap runs the mmu_notifier invalidate callbacks. On KVM hosts
try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() ->
tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps
the CPU busy for a long time.
The loop already calls cond_resched(), but on PREEMPTION kernels that is
a no-op, and involuntary preemption is not a Tasks-RCU quiescent state.
A long batch therefore never reports a quiescent state, and the
migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the
Tasks-RCU grace period for minutes, which is common at Meta fleet:
INFO: rcu_tasks detected stalls on tasks:
0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task
Call Trace:
tdp_mmu_zap_leafs
tdp_mmu_next_root
gfn_to_pfn_cache_invalidate_start
kvm_mmu_notifier_invalidate_range_start
__mmu_notifier_invalidate_range_start
try_to_migrate_one
try_to_migrate
migrate_pages_batch
migrate_pages
compact_zone
compact_node
kcompactd
kthread
Use cond_resched_tasks_rcu_qs() so a quiescent state is reported even
when cond_resched() does nothing.
This has also been discussed at [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix stale walk->action escaping walk_pmd_range()
If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is
retried. The PMD entry may be cleared at the point of retry.
In this case, if walk->ops->install_pte is not specified, the code
continues to the next PMD entry in the range without resetting
walk->action to ACTION_SUBTREE.
This leaves walk->action erroneously set to ACTION_AGAIN, which is
incorrect.
This was incorrect but not problematic up until commit 3b89863c3fa4
("mm/pagewalk: fix race between concurrent split and refault") which
updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon
walk_pmd_range()'s return, causing the PUD walk to be retried.
In this case this results in duplicate walk callbacks being invoked,
which is erroneous and will break any caller that is not idempotent
with respect to this (and waste time for those which are). The result
is an out-of-bounds write, triggered by a local fuzzer:
[ 2.272695] ==================================================================
[ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190
[ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106
[ 2.274966]
[ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy)
[ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.275164] Call Trace:
[ 2.275170] <TASK>
[ 2.275172] dump_stack_lvl+0x53/0x70
[ 2.275200] print_report+0xd0/0x630
[ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.275219] ? irqentry_exit+0xd2/0x670
[ 2.275224] ? irqentry_exit+0xd2/0x670
[ 2.275226] ? __virt_addr_valid+0xef/0x1a0
[ 2.275239] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275242] kasan_report+0xce/0x100
[ 2.275245] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275248] __mincore_unmapped_range+0x14f/0x190
[ 2.275252] mincore_unmapped_range+0x45/0x70
[ 2.275254] walk_pgd_range+0xafc/0xfc0
[ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10
[ 2.275264] ? __update_load_avg_se+0x3d1/0x670
[ 2.275275] __walk_page_range+0xc0/0x310
[ 2.275278] ? __pfx_find_vma+0x10/0x10
[ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0
[ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0
[ 2.275293] ? __pfx_mtree_load+0x10/0x10
[ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10
[ 2.275302] ? __free_frozen_pages+0x54d/0x7e0
[ 2.275308] __do_sys_mincore+0x132/0x380
[ 2.275311] do_syscall_64+0xf9/0x540
[ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.275322] RIP: 0033:0x422ccd
[ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b
[ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd
[ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000
[ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100
[ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf
[ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001
[ 2.275346] </TASK>
[ 2.275347]
[ 2.296904] The buggy address belongs to the object at ffff888008d9b000
[ 2.296904] which belongs to the cache sigqueue of size 80
[ 2.298151] The buggy address is located 0 bytes inside of
[ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050)
[ 2.299408]
[ 2.299601] The buggy address belongs to the physical page:
[ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded time, and the scan loop
in shrink_lruvec() only calls cond_resched(), which is a no-op on
PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent
state, so the reclaiming task never reports one and becomes a holdout.
Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state
even when cond_resched() does nothing.
PS: This has been discussed in [1] |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin under
the current limit and returns true without killing, while the writer still
compares usage against its stale target and records another OOM event.
Check the current limit at the start of each reclaim iteration and stop if
it no longer matches the writer's target.
Reproducer:
Populate a cgroup with anonymous memory and disable swapping. Lower
memory.max from one open file, then restore it to "max" through another
open file after the new limit becomes visible.
Without the patch, the first writer remains blocked and repeatedly
increments the OOM event counter. With the patch, it returns normally.
This was not motivated by a reported production workload. We found it
through automated randomized testing for our cgroup observability work
and reduced it to the reproducer above. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/tdx: Fix off-by-one in port I/O handling
handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use:
u64 mask = GENMASK(BITS_PER_BYTE * size, 0);
GENMASK(h, l) includes bit h. For size=1 (INB), this produces
GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8
bits). The mask is one bit too wide for all I/O sizes.
Fix the mask calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr
ffff888005010d30 by task init/44
Call Trace:
<TASK>
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
current_user_event_mm+0x51/0x1d0
user_events_ioctl+0x82e/0x15c0
__x64_sys_ioctl+0x139/0x1c0
do_syscall_64+0xce/0x450
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 44:
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x180/0x3a0
user_event_mm_alloc+0x3c/0x1f0
current_user_event_mm+0x88/0x1d0
Freed by task 42:
__kasan_slab_free+0x43/0x70
kfree+0x13a/0x390
process_one_work+0x696/0xf90
worker_thread+0x420/0xba0
The fix simply clears the copied pointer before any possible failure.
In case of failure, the child then has nothing to free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching the ring-buffer self-test fix in commit
91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()"). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a failed
replacement leaves it at -1.
The current !retry test reverses both outcomes. It returns an error after
a successful final replacement, leaving the link update complete but the
reader bookkeeping unfinished. After a failed final replacement, it
falls through and updates the head and reader pointers as though the
replacement succeeded, which can corrupt the ring.
Treat only a negative counter as exhaustion and return the documented
-EBUSY error. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(),
which frees every sub-buffer of the ring buffer, including the reader
page, and replaces them with newly allocated ones.
Readers of trace_pipe hold pointers into those pages. ring_buffer_peek()
looks up an event under cpu_buffer->reader_lock but returns the event
pointer after dropping the lock, and peek_next_entry() then calls
ring_buffer_event_length() and ring_buffer_event_data() on it. If the
sub-buffer order is changed in that window, the reader dereferences
freed memory:
BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430
Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002
Freed by:
free_buffer_page kernel/trace/ring_buffer.c:398 [inline]
ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444
buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221
Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change.
This is the lock trace_pipe readers already hold across their entire
peek-and-print loop, so the swap can no longer race with a reader that
is dereferencing a peeked event. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry, leaving a dangling pointer and leaking the
trace_array reference it holds.
A later hist trigger that references a variable makes find_var_file()
walk tr->hist_vars and dereference the freed hist_data. The bug is
reproducible from userspace by writing three hist triggers to tracefs:
cd /sys/kernel/tracing
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger
echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger
The third write panics the kernel:
BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290
Read of size 8 at addr ffff888001f8a0e0 by task sh/1
CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N
Call Trace:
find_var_file.part.0
find_event_var
parse_atom
parse_expr
__create_val_field
event_hist_trigger_parse
trigger_process_regex
event_trigger_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Allocated by task 1:
event_hist_trigger_parse
Freed by task 1:
hist_register_trigger+0x618/0xa30
event_hist_trigger_parse
The buggy address belongs to freed 2048-byte region
Oops: general protection fault ... RIP: find_var_file.part.0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix by removing the hist_data from tr->hist_vars and releasing the
trace_array reference in the named-data branch of hist_register_trigger()
before freeing the hist_data. |
| In the Linux kernel, the following vulnerability has been resolved:
debugfs: Fix lockdown check for mmap_prepare
Commit 651fdda8406d ("relay: update relay to use mmap_prepare")
changed the `mmap` file operation to `mmap_prepare` for relayfs, but
the lockdown check in debugfs was not updated accordingly.
This prevents debugfs from being locked down when the kernel is in
integrity mode if a file uses `mmap_prepare` but not `mmap`.
Since the conversion to `mmap_prepare` across the kernel is not yet
complete, update the lockdown check to look for both `mmap` and
`mmap_prepare` to ensure comprehensive coverage. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: bound the device-reported response length
nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported
by the NSM device into msg->resp.len without bounding it to the response
buffer. A malicious or buggy backend can report a length larger than the
response buffer; parse_resp_raw() then copies that many bytes out of the
fixed buffer to user space, disclosing adjacent kernel heap (an
out-of-bounds read). The request path already floors its length in
fill_req_raw(); the response path lacks the symmetric check.
Clamp the stored length to the size of the response buffer. Well-behaved
devices report no more than the posted buffer size, so conforming traffic
is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not really a good way of fixing this without breaking
video_register_device() into two parts, one that initializes everything,
and one that does the actual device_register, and then converting all
V4L2 drivers to this new model.
That is a massive job, and it is very unlikely that device_register
will fail.
So rather than ending up in a double-free scenario, just revert this
patch, and in that case we'll have a small memory leak. Which is a lot
more robust. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
