| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: The QUIC stream reassembly algorithm performance deteriorates
progressively as packets are arriving out of order. The worst case has
a quadratic complexity proportional to the number of stream frames kept in
the buffer for the received stream data.
Impact summary: A remote QUIC peer that completes the handshake can create
a connection-scoped CPU pressure and potentially a Denial of Service using
compliant STREAM frames inside the advertised receive window, with low
attacker bandwidth.
CWE: CWE-407: Inefficient Algorithmic Complexity
Description: OpenSSL manages received QUIC stream fragments using a
doubly-linked list. While it optimizes for append operations (at the end of
the list), it falls back to a head-to-tail linear search for any fragment
that does not immediately follow the current `tail`.
By manipulating the sequence of offsets, an attacker can force the server
to perform O(n^2) operations, consuming excessive CPU time for the
QUIC process.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: The OpenSSL QUIC server, when configured to not preform address
validation, can be forced to count incoming packets multiple times in its
unvalidated credit computation, leading to a violation of the RFC 9000
unvalidated connection amplification limit of 3 times the amount of data
received.
Impact summary: A remote attacker able to spoof packets to a server using the
OpenSSL QUIC implementation might use the server for an amplification of
a DDoS attack.
CWE: CWE-440: Expected Behavior Violation
Description: OpenSSL's QUIC stack, when operating as a server, enforces client
address validation (RFC 9000, Section 8), to confirm the peer address is not
used for a traffic amplification attack. If this feature is disabled on the
server, the QUIC stack limits the amount of server data that can be sent to 3
times the amount of data received from the peer address, until such time as the
TLS handshake is completed.
The OpenSSL QUIC server, when operating in non-validation mode, adds the
length of the whole datagram received to the unvalidated credit limit when
processing each QUIC packet in the datagram. A remote peer may,
after establishing a connection with an initial client hello frame, send a
subsequent datagram containing multiple QUIC packets, leading the server to
account the entire datagram length for each packet in the datagram, resulting
in the server believing that the peer has sent more data than it actually has,
thereby violating the 3x amplification limit mandated by the RFC.
FIPS impact: no
As the QUIC stack lives outside the FIPS module boundary, no FIPS modules
are affected by this CVE. |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Issue summary: A CMP client that requests certificate revocation on the basis
of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when
processing a crafted revocation response.
Impact summary: The NULL pointer dereference happens on a read which
leads to a crash and a Denial of Service for the affected client application.
CWE: CWE-476: NULL-pointer dereference
Description: A CMP client revoking a certificate has to tell the server which
certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the
certificate itself or its issuer name and serial number. This is
'openssl cmp -cmd rr -csr <file>' on the command line, or
OSSL_CMP_exec_RR_ses() with the certificate supplied via
OSSL_CMP_CTX_set1_p10CSR() through the API.
A CSR does not contain the issuer name and serial number of the certificate,
so the client does not send them. A server may optionally name the
certificate it revoked in its response, and the client then compares that
name against what it sent. Having sent neither an issuer name nor a serial
number, it has nothing to compare against, and a server returning a specially
crafted name causes the client to read from a NULL pointer and crash.
The revocation response is checked for valid message protection before
the affected code is reached, so an attacker must be a malicious or
compromised CMP server, or a man-in-the-middle in possession of the
secret used for message protection. Clients that identify the certificate
to be revoked by a certificate or by issuer and serial number rather
than by a PKCS#10 CSR are not affected.
FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary. |
| Issue summary: OpenSSL QUIC stack does not enforce connection
level flow control for streams. Remote peers may send more bytes
as long as they fit within the stream flow control limits.
Impact summary: A malicious remote peer may exploit the lack of connection
flow control for streams to make the QUIC stack receive ~100MB of memory
instead of 768 KiB (default flow control window size).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The local QUIC stack advertises two flow control limits
to its remote peer: stream flow control limit and connection flow
control limit. The remote peer must follow both limits when transmitting
stream data.
Whenever the local QUIC stack receives a stream frame, it validates
that the size of the received stream frame stays within flow control limits.
If either limit is exceeded (stream level or connection level), then
the QUIC stack must close the connection with a flow control error.
The vulnerable OpenSSL QUIC stack enforces the stream-level but not
the connection-level limit. To exploit the issue, three conditions must be met:
- the remote peer opens several streams
- each stream must stay within the stream-level flow control limit
- there must be no zero-offset byte sent on any of the streams
(to prevent the vulnerable QUIC stack from consuming data).
By meeting the conditions above, the remote peer may make the local stack
allocate 2 x MAX_STREAMS x (stream flow control limit) bytes
of memory. MAX_STREAMS defaults to 100, and the limit applies to both
bidirectional and unidirectional streams, making it 200 in total. The default
flow control window for a stream is 512kB. The remote peer may
force the vulnerable QUIC stack to allocate 100MB of heap per connection.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: A non-constant-time optimized implementation of scalar
point multiplication is used for SM2 private key operations on ARM64 and
RISC-V platforms.
Impact summary: An attacker able to measure the time taken by, or to observe
the cache-line access pattern of SM2 signing or decryption on an affected
platform can learn information about the secret scalar.
CWE: CWE-208: Observable Timing Discrepancy
Description: On ARM64 and RISC-V processors, the SM2 curve uses an optimized
scalar multiplication implementation whose conditional branches and table
look ups are chosen according to the bits of the secret scalar. The execution
time and the cache-access pattern therefore depend on the long-term private
key (during SM2 decryption) or the per-signature nonce (during SM2 signature
generation), forming a timing and cache side-channel.
FIPS Impact: no
SM2 is not a FIPS algorithm and the optimized SM2 implementation is not part
of the FIPS module.
OpenSSL 4.0, 3.6, 3.5 and 3.4 are vulnerable to this issue on AArch64 and
RISC-V.
OpenSSL 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.5.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.9.
OpenSSL 3.4 users should upgrade to OpenSSL 3.4.8.
This issue was reported on 2 May 2026 by Abhinav Agarwal.
It was independently reported on 6 June 2026 by Feng Xue.
The fix was developed by Igor Ustinov.
-- cut (non-publishing metadata for internal use) --
Reported by: Abhinav Agarwal, Feng Xue
Fixed by: Igor Ustinov |
| The TMS file upload endpoint fails to enforce server-side file type restrictions, allowing an attacker to upload and execute arbitrary PHP files on the web server. |
| The file export endpoint allows any unauthenticated attacker to export arbitrary database tables by sending a crafted POST request. |
| Improper removal of sensitive information before storage or transfer vulnerability in Wikimedia Foundation's Mediawiki - FlaggedRevs extension through 1.46.0. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Reflected XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| The Viidure Android application embeds permanent, plaintext cloud storage credentials within its compiled code. These credentials provide full access to critical platform storage, including the ability to read, modify, or delete operational files such as firmware and application binaries. |
| The central cloud storage backend for the entire dashcam platform is misconfigured with public-read permissions, allowing unrestricted access to all stored objects. Because this bucket serves as shared storage for the platform, sensitive user records, live dashcam footage, application packages, and firmware files are exposed to anyone on the internet. |
| The scriptPath parameter is incorporated into a /bin/sh -c command without sufficient neutralization of shell metacharacters, allowing shell command substitution and execution.
An authenticated user can exploit this behavior by creating a resource whose filename contains shell command substitution syntax, such as $(...), and subsequently supplying the resulting path to the Alert Script plugin's /test-send endpoint. When the alert script is executed, the shell interprets the injected command, resulting in arbitrary command execution with the privileges of the DolphinScheduler service process.
This issue affects Apache DolphinScheduler: before 3.4.3.
Users are recommended to upgrade to version 3.4.3, which fixes the issue. |
| Apache Airflow's Teradata provider embedded cloud storage credentials directly into SQL statements. `S3ToTeradataOperator` and `AzureBlobStorageToTeradataOperator` interpolate the source bucket's credentials as plain string literals into the `CREATE MULTISET TABLE ... LOCATION` statement whenever the bucket is private and no `teradata_authorization_name` is configured — which is the default credential path for both operators. The statement is then logged and executed, so the credentials reach two places outside the operator's control.
The two operators expose different credentials through different channels, and deployments should check both. `S3ToTeradataOperator` takes its values from `s3_hook.get_credentials()`, which under an instance profile or IRSA returns runtime AWS credentials that were never registered with Airflow's secrets masker — and the STS session token is runtime-generated and therefore unmasked even when an AWS connection is configured. Those credentials appear **in the Airflow task log**, readable by any user with log-view permission on the Dag. `AzureBlobStorageToTeradataOperator` takes its storage account key from the connection, so the masker usually redacts the task-log copy; its exposure is the Teradata side. **Both** operators write the credentials into Teradata's DBQL query logs and live monitoring views, where Airflow's masking never applies and the values persist for that system's log retention period.
Affects deployments using either operator against a private bucket or container without a Teradata `AUTHORIZATION` object. Users are advised to upgrade to `apache-airflow-providers-teradata` `3.7.0` or later, which keeps the credential-bearing statement out of the Airflow task log. Upgrading does not remove the credentials from Teradata's query logs and monitoring views, which Airflow cannot redact: users should configure `teradata_authorization_name` with a Teradata `AUTHORIZATION` object so that credentials are never inlined, and should rotate any credentials previously used through the inline path. |
| Pausing a shared (public) dashboard did not revoke its access token for the endpoints that serve frontend bootstrap data. Anyone holding the link to a paused shared dashboard could still retrieve, without authenticating, the configuration of the dashboard's data sources, including stored credentials for data sources using browser access (missing authorization). Deleting the shared dashboard does revoke the token. |
| metatool-ai MetaMCP up to and including 2.4.22 is vulnerable to Code Execution in the internal MCP inspector proxy endpoint GET /mcp-proxy/server/stdio (createTransport, STDIO branch, routers/mcp-proxy/server.ts). |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Mediawiki - Cargo extension allows Stored XSS.
This issue affects Mediawiki - Cargo extension: through 3.9.4. |
| The /datasources/unauth-datasource endpoint does not properly enforce data source authorization. An authenticated user can invoke this endpoint to obtain information about data sources they are not authorized to access. This may expose data source configuration and other sensitive metadata, depending on the fields returned by the endpoint.
This issue affects Apache DolphinScheduler: before 3.4.3.
Users are recommended to upgrade to version 3.4.3, which fixes the issue. |
| Dockhand before 1.0.36 contains an open redirect vulnerability in the OIDC initiation endpoint that allows unauthenticated remote attackers to redirect authenticated users to attacker-controlled sites by injecting an unvalidated redirect query parameter. Attackers can craft a malicious link targeting the OIDC callback flow to capture authorization codes via the Referer header and conduct follow-up credential phishing against any Dockhand account after a legitimate login. |
| An issue in AltumCode 66Uptime before v.54.0.0 and 66Uptime ping-servers plugin before v.2.0.0 allows a remote attacker to execute arbitrary code via the index.php |
