| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use of unmaintained third party components for some Intel(R) Processor Identification Utility before version 8.0.43 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper buffer restrictions for some Intel(R) Xeon(R) Processor firmware with SGX enabled may allow a privileged user to potentially enable escalation of privilege via local access. |
| A vulnerability classified as problematic was found in MindSpore 2.5.0. Affected by this vulnerability is the function mindspore.numpy.fft.hfftn. The manipulation leads to memory corruption. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. |
| WilderForge is a Wildermyth coremodding API. A critical vulnerability has been identified in multiple projects across the WilderForge organization. The issue arises from unsafe usage of `${{ github.event.review.body }}` and other user controlled variables directly inside shell script contexts in GitHub Actions workflows. This introduces a code injection vulnerability: a malicious actor submitting a crafted pull request review containing shell metacharacters or commands could execute arbitrary shell code on the GitHub Actions runner. This can lead to arbitrary command execution with the permissions of the workflow, potentially compromising CI infrastructure, secrets, and build outputs. Developers who maintain or contribute to the repos WilderForge/WilderForge, WilderForge/ExampleMod, WilderForge/WilderWorkspace, WilderForge/WildermythGameProvider, WilderForge/AutoSplitter, WilderForge/SpASM, WilderForge/thrixlvault, WilderForge/MassHash, and/or WilderForge/DLC_Disabler; as well as users who fork any of the above repositories and reuse affected GitHub Actions workflows, are affected. End users of any the above software and users who only install pre-built releases or artifacts are not affected. This vulnerability does not impact runtime behavior of the software or compiled outputs unless those outputs were produced during exploitation of this vulnerability. A current workaround is to disable GitHub Actions in affected repositories, or remove the affected workflows. |
| A vulnerability has been identified in IEC 1Ph 7.4kW Child socket (8EM1310-2EH04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Child socket/ shutter (8EM1310-2EN04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m (8EM1310-2EJ04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m incl. SIM (8EM1310-2EJ04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket (8EM1310-2EH04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket incl. SIM (8EM1310-2EH04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter (8EM1310-2EN04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter SIM (8EM1310-2EN04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Child cable 7m (8EM1310-3EJ04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket (8EM1310-3EH04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket/ shutter (8EM1310-3EN04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m (8EM1310-3EJ04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m incl. SIM (8EM1310-3EJ04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket (8EM1310-3EH04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket incl. SIM (8EM1310-3EH04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter (8EM1310-3EN04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter SIM (8EM1310-3EN04-3GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child socket (8EM1310-3FH04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket (8EM1310-3FH04-3GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket incl. SI (8EM1310-3FH04-3GA2) (All versions < V2.135), UL Commercial Cellular 48A NTEP (8EM1310-5HF14-1GA2) (All versions < V2.135), UL Commercial Child 40A w/ 15118 HW (8EM1310-4CF14-0GA0) (All versions < V2.135), UL Commercial Child 48A BA Compliant (8EM1315-5CG14-0GA0) (All versions < V2.135), UL Commercial Child 48A w/ 15118 HW (8EM1310-5CF14-0GA0) (All versions < V2.135), UL Commercial Parent 40A with Simcard (8EM1310-4CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A (USPS) (8EM1317-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A BA Compliant (8EM1315-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A with Simcard BA (8EM1310-5CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1310-5CG14-1GA1) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1314-5CG14-2FA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1315-5HG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A,15118 25ft Sim (8EM1310-5CG14-1GA2) (All versions < V2.135), VersiCharge Blue™ 80A AC Cellular (8EM1315-7BG16-1FH2) (All versions < V2.135). Affected devices contain Modbus service enabled by default. This could allow an attacker connected to the same network to remotely control the EV charger. |
| Improper buffer restrictions in the firmware for the TDX Module may allow an escalation of privilege. System software adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| z2d is a pure Zig 2D graphics library. z2d v0.7.0 released with a new multi-sample anti-aliasing (MSAA) method, which uses a new buffering mechanism for storing coverage data. This differs from the standard alpha mask surface used for the previous super-sample anti-aliasing (SSAA) method. Under certain circumstances where the path being drawn existed in whole or partly outside of the rendering surface, incorrect bounding could cause out-of-bounds access within the coverage buffer. This affects the higher-level drawing operations, such as Context.fill, Context.stroke, painter.fill, and painter.stroke, when either the .default or .multisample_4x anti-aliasing modes were used. .supersample_4x was not affected, nor was drawing without anti-aliasing. In non-safe optimization modes (consumers compiling with ReleaseFast or ReleaseSmall), this could potentially lead to invalid memory accesses or corruption. z2d v0.7.1 fixes this issue, and it's recommended to upgrade to v0.7.1, or, given the small period of time v0.7.0 has been released, use v0.7.1 immediately, skipping v0.7.0. |
| Improper buffer restrictions in PlatformPfrDxe driver in UEFI firmware for some Intel(R) Server D50FCP Family products may allow a privileged user to enable escalation of privilege via local access. |
| A vulnerability exists in Asset Suite for an authenticated user to manipulate the content of performance related log data or to inject crafted data in logfile for potentially carrying out further malicious attacks. Performance logging is typically enabled for troubleshooting purposes while resolving application performance related issues. |
| A vulnerability in Koji was found. An unsanitized input allows for an XSS attack. Javascript code from a malicious link could be reflected in the resulting web page. It is not expected to be able to submit an action or make a change in Koji due to existing XSS protections in the code |
| Incorrect configuration of replication security in the MariaDB component of the infra-operator in YAOOK Operator allows an on-path attacker to read database contents, potentially including credentials |
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could lead to loss of
confidentiality when a malicious user, having physical access, sets the radio in factory default mode where the
product does not correctly initialize all data. |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could
cause a potential arbitrary code execution after a successful Man-In-The-Middle attack followed by sending a
crafted Modbus function call to tamper with memory area involved in memory size computation. |
| Ambiguous wording in the web interface of the ctrlX OS setup mechanism could lead the user to believe that the backup file is encrypted when a password is set. However, only the private key - if available in the backup - is encrypted, while the backup file itself remains unencrypted. |
| A vulnerability exists in PX Backup whereby sensitive information may be logged under specific conditions. |
| The vulnerability was found in OpenShift Service Mesh 2.6.3 and 2.5.6. This issue occurs due to improper sanitization of HTTP headers by Envoy, particularly the x-forwarded-for header. This lack of sanitization can allow attackers to inject malicious payloads into service mesh logs, leading to log injection and spoofing attacks. Such injections can mislead logging mechanisms, enabling attackers to manipulate log entries or execute reflected cross-site scripting (XSS) attacks. |
| ESPAsyncWebServer is an asynchronous HTTP and WebSocket server library for ESP32, ESP8266, RP2040 and RP2350. In versions up to and including 3.7.8, a CRLF (Carriage Return Line Feed) injection vulnerability exists in the construction and output of HTTP headers within `AsyncWebHeader.cpp`. Unsanitized input allows attackers to inject CR (`\r`) or LF (`\n`) characters into header names or values, leading to arbitrary header or response manipulation. Manipulation of HTTP headers and responses can enable a wide range of attacks, making the severity of this vulnerability high. A fix is available at pull request 211 and is expected to be part of version 3.7.9. |
| A local privilege escalation vulnerability in Sophos Intercept X for Windows with Central Device Encryption 2024.2.0 and older allows writing of arbitrary files. |
| A vulnerability was found in Netgear WNCE3001 1.0.0.50. It has been classified as critical. This affects the function http_d of the component HTTP POST Request Handler. The manipulation of the argument Host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
