| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in Samsung Contacts prior to SMR Aug-2026 Release 1 allows physical attackers to access data across multiple user profiles. |
| A security vulnerability has been detected in saithink/saigroup SaiAdmin up to 5.0.1. This impacts the function shell_exec of the file /app/saipackage/install/upload of the component Plugin Upload Endpoint. The manipulation leads to unrestricted upload. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This product is published by multiple vendors. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_elf_fdpic: only honour the first PT_INTERP
The program header scan handles PT_INTERP from a switch nested in the
scan loop, so its break leaves the switch and not the loop. A binary
carrying more than one PT_INTERP runs the case again and overwrites both
interpreter_name and interpreter. The previous name allocation leaks and
so does the previous interpreter reference, along with the write denial
open_exec() took on it. The denial is never released, so the file stays
unwritable for as long as the system runs.
An unprivileged caller reaches this with a crafted binary and repeats it
at will. binfmt_elf stops at the first PT_INTERP. Do the same here.
The flaw dates back to the driver's introduction in the pre-git history
tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF
binary format driver"). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Preserve rq tracking across local DSQ dispatch
dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while
ops.dispatch() has recorded the current rq. Moving a task to a local DSQ
may switch to the source or destination rq before synchronously invoking
ops.dequeue() through the following path:
SCX_CALL_OP(dispatch, rq)
ops.dispatch()
scx_bpf_dsq_move_to_local()
scx_flush_dispatch_buf()
finish_dispatch()
dispatch_to_local_dsq()
scx_dispatch_enqueue()
local_dsq_post_enq()
call_task_dequeue()
SCX_CALL_OP_TASK(dequeue, locked_rq, ...)
The nested callback saves the recorded rq and restores it on return. If
the rq tracking does not follow the lock switch, update_locked_rq() can
trigger the following lockdep assertion while restoring an rq which is
no longer held:
WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170
Call Trace:
scx_dispatch_enqueue+0x2b0/0x460
dispatch_to_local_dsq+0x138/0x230
scx_flush_dispatch_buf+0x1af/0x220
scx_bpf_dsq_move_to_local___v2+0xe2/0x1c0
bpf__sched_ext_ops_dispatch+0x4b/0xa7
do_pick_task_scx+0x3b6/0x910
__pick_next_task+0x105/0x1f0
__schedule+0x3e7/0x1980
Introduce switch_rq_lock() to update the tracking state together with
each rq lock handoff. Use it in dispatch_to_local_dsq(),
move_remote_task_to_local_dsq() and the in-balance paths of
scx_dsq_move(), ensuring that scx_locked_rq() consistently refers to the
rq whose lock is actually held throughout the lock dance. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: fix race between registration and connection abortion
This fixes this race:
- thread a: io_uring_enter -> register sqe ->
fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref
yet
- thread b: fuse_conn_destroy() -> fuse_chan_abort() ->
fuse_uring_abort() is a no-op due to queue ref being 0
- thread a: grabs the queue_ref, queue_ref is now 1, rest of
fuse_uring_do_register() logic executes
- thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs
and calls
"wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);"
The abort/unmount thread will hang indefinitely in unkillable state as
nothing will decrement queue_refs or wake stop_waitq, and the ring,
queue, and ent are leaked.
Fix this by checking fch->connected under fch->lock after the created
ent has grabbed a ref count on the queue. This ensures that in the
scenario above, it is guaranteed that we either release the queue ref
and wake up stop_waitq (in case fuse_chan_wait_aborted() is already
waiting) in fuse_uring_do_register() when we detect !fch->connected, or
if the connection is aborted after the check, it is guaranteed that the
async teardown worker will be running in the background cleaning up ents
and decrementing the ent's ref on the queue, which will unblock the
eventual queue and ring teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
| A stored cross-site scripting (XSS) vulnerability in lobehub/lobe-chat through v2.2.13 allows a low-privileged authenticated user to inject arbitrary JavaScript into the application by uploading a crafted SVG file as a user avatar. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix aperture mapping leak
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
(cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a) |
| A flaw was found in multicluster-global-hub. An attacker who compromises a managed hub can leverage its legitimate Kafka client certificate to publish a CloudEvent (a specification for describing event data in a common way) message to the shared `gh-spec` topic. This message can spoof its source as "global-hub" and target other managed hubs. Due to a lack of binding between the Kafka client principal and the CloudEvent envelope, the agent on the targeted hub accepts this spoofed message and applies arbitrary resources. This vulnerability allows for fleet-wide cluster-admin privilege escalation across all managed hubs. |
| GNU cpio is vulnerable to improper encoding or escaping of output in its archive member listing functionality. When listing archive members via cpio -it, member names are printed directly to output without quoting or escaping. An attacker can craft a cpio archive containing member names with embedded newline characters or ANSI escape sequences, causing forged listing entries or terminal control sequence injection when the listing is displayed.
This issue has been fixed in commit 2ff9600c9ef32e88759843cdbde74c8db5ae9b30 |
| A missing authentication vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to access the full file manager functionality including reading, writing, deleting, and uploading files anywhere on the server filesystem. |
| An unrestricted file upload vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to execute arbitrary PHP code on the server. The application ships with an empty upload extension filter ( = array) and no authentication enabled by default (auth_pass is empty string), allowing an unauthenticated attacker to upload a PHP webshell and execute it by browsing to the uploaded path. |
| A user enumeration vulnerability in bluewave-labs/Checkmate through 2.1.0 allows an unauthenticated remote attacker to determine whether a given email address is registered. The POST /api/v1/auth/recovery/request endpoint returns HTTP 200 for registered email addresses and a different status code for unregistered ones, enabling attackers to enumerate valid user accounts. |
| A missing authentication vulnerability in frangoteam/FUXA through 1.3.3 allows an unauthenticated remote attacker to query all historical sensor data via the DAQ_QUERY Socket.IO event. When secureEnabled=true, all other sensitive Socket.IO events (DEVICE_BROWSE, HOST_INTERFACES, DEVICE_TAGS_REQUEST, etc.) call isSocketAdminAuthorized to verify the connection token, but the DAQ_QUERY handler in server/runtime/index.js lacks this check entirely. |
| A stored cross-site scripting (XSS) vulnerability in Bludit 4.0.0-beta allows a low-privileged authenticated user (Author role) to inject arbitrary JavaScript by uploading a crafted SVG file as the site logo. A stored script tag in the SVG executes in the browser of any user who loads the logo. |
| An improper authorization vulnerability in fosrl/pangolin through v1.20.0 allows an authenticated remote attacker to authenticate to any resource in any organization by reusing an access token issued for a different resource. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in phoenixframework phoenix_live_view allows an attacker to send a victim's browser to an origin of the attacker's choosing via a :to value containing ASCII tab, LF or CR.
redirect/2 validates :to through the private validate_local_url!/2 in lib/phoenix_live_view.ex, which is intended to guarantee the target is a path within the application. It rejects a leading // and any backslash, but not ASCII tab, LF or CR. Browsers strip those three characters before parsing a URL, so a value such as /<TAB>/example.com passes validation as a path and is then resolved as the scheme-relative URL //example.com. The live navigation functions share the guard but are not affected, because the client expands their target against the current origin. push_patch/2 is also affected before 0.7.0, which is when that expansion was added.
This issue affects phoenix_live_view: from 0.5.0 before 1.0.19, from 1.1.0-rc.0 before 1.1.33, and from 1.2.0-rc.0 before 1.2.9. |
| GNU cpio is vulnerable to an uncontrolled memory allocation in the make_path function at src/makepath.c. The function uses alloca to allocate stack memory based on the length of argpath, which is derived from an archive-controlled pathname during extraction. A malicious cpio archive containing a sufficiently long nested pathname causes an unbounded stack allocation, resulting in a stack overflow and crash of the cpio process. An attacker who can supply a crafted cpio archive to a victim who extracts it can cause a denial of service.
This issue has been fixed in commit 3cd514031371d8aeeaf2048aa10103e02831aaa9 |
