| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the NX-OS CLI privilege levels of Cisco UCS Manager Software could allow an authenticated, local attacker with read-only privileges to modify files and perform unauthorized actions on an affected system.
This vulnerability exists because unnecessary privileges are given to the user. An attacker could exploit this vulnerability by authenticating to a device as a read-only user and connecting to the NX-OS CLI. A successful exploit could allow the attacker to create or overwrite files in the file system or perform limited privileged actions on an affected device. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator. |
| A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to root.
This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of the affected device with root-level privileges. |
| A vulnerability in the Object Model CLI component of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have valid user credentials and any role that includes CLI access.
This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by issuing crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| This vulnerability is caused by a CWE‑159: "Improper Handling of Invalid Use of Special Elements" weakness, which leads to an unrecoverable inconsistency in the CLFS.sys driver. This condition forces a call to the KeBugCheckEx function, allowing an unprivileged user to trigger a system crash. Microsoft silently fixed this vulnerability in the September 2025 cumulative update for Windows 11 2024 LTSC and Windows Server 2025. Windows 25H2 (released in September) was released with the patch. Windows 1123h2 and earlier versions remain vulnerable. |
| Ethereum Name Service (ENS) is a distributed, open, and extensible naming system based on the Ethereum blockchain. In versions 1.6.2 and prior, the `RSASHA256Algorithm` and `RSASHA1Algorithm` contracts fail to validate PKCS#1 v1.5 padding structure when verifying RSA signatures. The contracts only check if the last 32 (or 20) bytes of the decrypted signature match the expected hash. This enables Bleichenbacher's 2006 signature forgery attack against DNS zones using RSA keys with low public exponents (e=3). Two ENS-supported TLDs (.cc and .name) use e=3 for their Key Signing Keys, allowing any domain under these TLDs to be fraudulently claimed on ENS without DNS ownership. Apatch was merged at commit c76c5ad0dc9de1c966443bd946fafc6351f87587. Possible workarounds include deploying the patched contracts and pointing DNSSECImpl.setAlgorithm to the deployed contract. |
| The administrative credentials can be extracted through application API responses, mobile application reverse engineering, and device firmware reverse engineering. The exposure may result in an attacker gaining full administrative access to the Gardyn IoT Hub exposing connected devices to malicious control. |
| Model Context Protocol Servers is a collection of reference implementations for the model context protocol (MCP). In mcp-server-git versions prior to 2026.1.14, the git_add tool did not validate that file paths provided in the files argument were within the repository boundaries. Because the tool used GitPython's repo.index.add() rather than the Git CLI, relative paths containing `../` sequences that resolve outside the repository were accepted and staged into the Git index. Users are advised to upgrade to 2026.1.14 or newer to remediate this issue. |
| LangGraph Checkpoint defines the base interface for LangGraph checkpointers. Prior to version 4.0.0, a Remote Code Execution vulnerability exists in LangGraph's caching layer when applications enable cache backends that inherit from `BaseCache` and opt nodes into caching via `CachePolicy`. Prior to `langgraph-checkpoint` 4.0.0, `BaseCache` defaults to `JsonPlusSerializer(pickle_fallback=True)`. When msgpack serialization fails, cached values can be deserialized via `pickle.loads(...)`. Caching is not enabled by default. Applications are affected only when the application explicitly enables a cache backend (for example by passing `cache=...` to `StateGraph.compile(...)` or otherwise configuring a `BaseCache` implementation), one or more nodes opt into caching via `CachePolicy`, and the attacker can write to the cache backend (for example a network-accessible Redis instance with weak/no auth, shared cache infrastructure reachable by other tenants/services, or a writable SQLite cache file). An attacker must be able to write attacker-controlled bytes into the cache backend such that the LangGraph process later reads and deserializes them. This typically requires write access to a networked cache (for example a network-accessible Redis instance with weak/no auth or shared cache infrastructure reachable by other tenants/services) or write access to local cache storage (for example a writable SQLite cache file via permissive file permissions or a shared writable volume). Because exploitation requires write access to the cache storage layer, this is a post-compromise / post-access escalation vector. LangGraph Checkpoint 4.0.0 patches the issue. |
| LangChain is a framework for building LLM-powered applications. Prior to version 1.1.8, a redirect-based Server-Side Request Forgery (SSRF) bypass exists in `RecursiveUrlLoader` in `@langchain/community`. The loader validates the initial URL but allows the underlying fetch to follow redirects automatically, which permits a transition from a safe public URL to an internal or metadata endpoint without revalidation. This is a bypass of the SSRF protections introduced in 1.1.14 (CVE-2026-26019). Users should upgrade to `@langchain/community` 1.1.18, which validates every redirect hop by disabling automatic redirects and re-validating `Location` targets before following them. In this version, automatic redirects are disabled (`redirect: "manual"`), each 3xx `Location` is resolved and validated with `validateSafeUrl()` before the next request, and a maximum redirect limit prevents infinite loops. |
| Due to improper neutralization of special elements, SQL statements can be injected via the handshake of a TLS-SRP connection. This can be used to inject known credentials into the database that can be utilized to successfully complete the handshake and use the protected service.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to missing neutralization of special elements, OS commands can be injected via the handshake of a TLS-SRP connection, which are ultimately run as the root user.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Due to missing neutralization of special elements, OS commands can be injected via the update functionality of a TLS-SRP connection, which is normally used for configuring devices inside the mesh network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Buffer overflow in parallel HNSW index build in pgvector 0.6.0 through 0.8.1 allows a database user to leak sensitive data from other relations or crash the database server. |
| Due to missing authentication, a user with physical access to the device can misuse the mesh functionality for adding a new mesh device to the network
to gain access to sensitive information, including the password for admin access to the web interface and the Wi-Fi passwords.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| NetExec is a network execution tool. Prior to version 1.5.1, the module spider_plus improperly creates the output file and folder path when saving files from SMB shares. It does not take into account that it is possible for Linux SMB shares to have path traversal characters such as `../` in them. An attacker can craft a filename in an SMB share that includes these characters, which when spider_plus crawls and downloads, can write or overwrite arbitrary files. The issue is patched in v1.5.1. As a workaround, do not run spider_plus with DOWNLOAD=true against targets. |
| Deserialization of Untrusted Data vulnerability in Stylemix uListing ulisting allows Object Injection.This issue affects uListing: from n/a through <= 2.2.0. |
| Bitnami Sealed Secrets is vulnerable to a scope-widening attack during
the secret rotation (/v1/rotate) flow. The rotation handler derives the
sealing scope for the newly encrypted output from untrusted
spec.template.metadata.annotations present in the input SealedSecret.
By submitting a victim SealedSecret to the rotate endpoint with the
annotation sealedsecrets.bitnami.com/cluster-wide=true injected into the
template metadata, a remote attacker can obtain a rotated version of the
secret that is cluster-wide. This bypasses original "strict" or
"namespace-wide" constraints, allowing the attacker to retarget and unseal
the secret in any namespace or under any name to recover the plaintext
credentials. |
| SIMPLE.ERP is vulnerable to the SQL Injection in search functionality in "Obroty na kontach" window. Lack of input validation allows an authenticated attacker to prepare a malicious query to the database that will be executed.
This issue was fixed in 6.30@A04.4_u06. |
