| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ] |
| A security flaw has been discovered in Hulupeep mcp-ui-probe up to 0.2.0. Affected is the function get_journey/delete_journey/analyze_journey/usage_stats of the file src/journey/JourneyStorage.ts of the component Journey/Usage. The manipulation of the argument journeyId/filename results in path traversal. The attack requires a local approach. The project was informed of the problem early through an issue report but has not responded yet. |
| Use after free in Payments in Google Chrome prior to 151.0.7922.109 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in Skia in Google Chrome prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Media in Google Chrome on Windows prior to 151.0.7922.109 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Web Authentication in Google Chrome prior to 151.0.7922.109 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in Codecs in Google Chrome prior to 151.0.7922.109 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Views in Google Chrome prior to 151.0.7922.109 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Views in Google Chrome on Windows prior to 151.0.7922.109 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Heap buffer overflow in Base in Google Chrome prior to 151.0.7922.109 allowed an attacker who convinced a user to install a malicious extension to potentially exploit heap corruption via a crafted Chrome Extension. (Chromium security severity: High) |
| Insufficient policy enforcement in Navigation in Google Chrome prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in GPU in Google Chrome on Linux prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient validation of untrusted input in WebAPKs in Google Chrome on Android prior to 151.0.7922.109 allowed a local attacker to potentially perform a sandbox escape via a malicious file. (Chromium security severity: High) |
| Use after free in Resources in Google Chrome on Android prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Nx is a monorepo solution for TypeScript and polyglot codebases. From version 20.8.0 until 22.7.7 and 23.0.2, the Nx self-hosted HTTP remote cache extracts downloaded cache artifacts without constraining where files are written. A malicious or on-path (MITM) remote cache server can return a crafted tar archive whose entries escape the cache directory and write to arbitrary locations on the machine running Nx, which can be escalated to remote code execution. Nx's default local cache and Nx Cloud are not affected; only workspaces configured to use a self-hosted remote cache are affected. This issue is fixed in versions 22.7.7 and 23.0.2. |
| Traefik is an open source HTTP reverse proxy and load balancer. From 3.6.11 until 3.6.25 and 3.7.10, Traefik's BasicAuth middleware in pkg/middlewares/auth/basic_auth.go deduplicates concurrent password checks with a singleflight key built from the delimiter-free concatenation of password and secret, allowing an attacker who has a valid credential and the stored hash to authenticate as an unconfigured username when headerField trusts the forwarded identity. This issue is fixed in 3.6.25 and 3.7.10. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| A vulnerability was determined in WonderTrader up to 0.9.9. This impacts an unknown function of the file src/Includes/WTSTradeDef.hpp of the component TraderATP Cash Trade Conversion. Executing a manipulation of the argument m_offsetType can lead to use of uninitialized variable. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| ZenML 0.94.6 contains a remote code execution vulnerability in the CloudpickleMaterializer component that allows attackers with write access to a shared artifact store to execute arbitrary code by planting a malicious pickle file. Attackers can replace a stored artifact.pkl file with a crafted cloudpickle payload containing a malicious __reduce__ method, which executes arbitrary system commands when any user or pipeline materializes the artifact through the unsanitized cloudpickle.load() call in cloudpickle_materializer.py. |
| Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, a field-level permissions bypass exposes restricted DocType fields. This issue is fixed in versions 16.23.0 and 15.112.0. |
