| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Net::Async::Statsd::Client versions through 0.005 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Metrics::Any::Adapter::SignalFx versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::SignalFx which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _labels function does not check tags labels newlines or statsd control characters. The labels can be used for metric injections. |
| Metrics::Any::Adapter::DogStatsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions such as dogstatsd) allow mutiple metrics, separated by newlines, to be sent per packet.
Metrics::Any::Adapter::DogStatsd which extends Metrics::Any::Adapter::Statsd, which has a similar vulnerability.
In addition, the _tags function does not check tags for newlines or statsd control characters. The tags can be used for metric injections. |
| Metrics::Any::Adapter::Statsd versions before 0.04 for Perl does not protect against metric injections.
The statsd protocol (and extensions) allow mutiple metrics, separated by newlines, to be sent per packet.
The send method does not validate the contents of the metric names or values. If the names have newlines and statsd control characters (colon, pipe) then metric injections are possible.
Version 0.04 fixed this by modifying the _make method to block metric names with characters below ASCII 32 (which includes the newline), or colons or pipes. |
| Etsy::StatsD versions through 1.002002 for Perl allow metric injections.
The metric names and values are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Note that the git repository contains an unreleased version with the gauge and set methods that also do not check for potential metric injections. |
| Mojolicious::Plugin::Statsd versions through 0.04 for Perl allowed metric injections.
The metric names and set values were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
Version 0.06 changes the module from being a statsd client to using a separate statsd client. It defaults to using a version of Net::Statsd::Tiny that fixes a similar issue (CVE-2026-46720). |
| Net::Statsd versions before 0.13 for Perl allow metric injections.
The metric names are not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics.
The update_stats (used for updating counters) and gauge methods do not check that values are numeric (which would block metric injection). |
| Net::Statsd::Tiny versions before 0.3.8 for Perl allowed metric injections.
The metric names and set values were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| Net::Statsd::Lite versions before 0.9.0 for Perl allowed metric injections.
The metric names were not checked for newlines, colons or pipes. Metrics generated from untrusted sources could inject additional statsd metrics. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: don't merge zcopy skbs
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Avoid OOB font access if console rotation fails
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info_sub_group() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info_sub_group()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&sub_group->kobj)
-> space_info_release()
-> kfree(sub_group)
Then control returns to create_space_info_sub_group(), where:
btrfs_sysfs_add_space_info_type() returns error
-> kfree(sub_group)
Thus, sub_group is freed twice.
Keep parent->sub_group[index] = NULL for the failure path, but after
btrfs_sysfs_add_space_info_type() has called kobject_put(), let the
kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-thin: fix metadata refcount underflow
There's a bug in dm-thin in the function rebalance_children. If the
internal btree node has one entry, the code tries to copy all btree
entries from the node's child to the node itself and then decrement the
child's reference count.
If the child node is shared (it has reference count > 1), we won't free
it, so there would be two pointers to each of the grandchildren nodes.
But the reference counts of the grandchildren is not increased, thus the
reference count doesn't match the number of pointers that point to the
grandchildren. This results in "device mapper: space map common: unable
to decrement block" errors.
Fix this bug by incrementing reference counts on the grandchildren if the
btree node is shared. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix the out-of-bounds nameoff handling for trailing dirents
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
nouveau_gem_pushbuf_reloc_apply() validates each relocation with
if (r->reloc_bo_offset + 4 > nvbo->bo.base.size)
but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integer
literal 4 promotes to unsigned int, so the addition is performed in 32
bits and wraps before the comparison against the size_t bo size.
Cast to u64 so the addition happens in 64-bit arithmetic.
[ Add Fixes: tag. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()
Some crafted images can have illegal (!partial_decoding &&
m_llen < m_plen) extents, and the LZ4 inplace decompression path
can be wrongly hit, but it cannot handle (outpages < inpages)
properly: "outpages - inpages" wraps to a large value and
the subsequent rq->out[] access reads past the decompressed_pages
array.
However, such crafted cases can correctly result in a corruption
report in the normal LZ4 non-inplace path.
Let's add an additional check to fix this for backporting.
Reproducible image (base64-encoded gzipped blob):
H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g
dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i
PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz
2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w
ywAAAAAAAADwu14ATsEYtgBQAAA=
$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt
$ dd if=/mnt/data of=/dev/null bs=4096 count=1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
