| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in Airsonic-Advanced up to 10.6.0. This vulnerability affects unknown code of the component Playlist Upload Handler. Performing manipulation results in unrestricted upload. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability was identified in ProudMuBai GoFilm 1.0.0/1.0.1. Impacted is the function SingleUpload of the file /server/controller/FileController.go. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts. |
| An Authentication Bypass vulnerability has been found in Trivision Camera NC227WF v5.8.0 from TrivisionSecurity. This vulnerability allows an attacker to retrieve administrator's credentials in cleartext by sending a request against the server using curl with random credentials to "/en/player/activex_pal.asp" and successfully authenticating the application. |
| Unauthenticated RCE in HPE Insight Cluster Management Utility |
| An issue in the component ddcdrv.sys of Nicomsoft WinI2C/DDC v3.7.4.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. |
| linjiashop <=0.9 is vulnerable to Incorrect Access Control. When using the default-generated JWT authentication, attackers can bypass the authentication and retrieve the encrypted "password" and "salt". The password can then be obtained through brute-force cracking. |
| Northern.tech Mender Server before 3.7.11 and 4.x before 4.0.1 has Incorrect Access Control. |
| The Profitori plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the stocktend_object endpoint in versions 2.0.6.0 to 2.1.1.3. This makes it possible to trigger the save_object_as_user() function for objects whose '_datatype' is set to 'users',. This allows unauthenticated attackers to write arbitrary strings straight into the user’s wp_capabilities meta field, potentially elevating the privileges of an existing user account or a newly created one to that of an administrator. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| The Wp Social Login and Register Social Counter plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 3.0.7. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| The PeproDev Ultimate Profile Solutions plugin for WordPress is vulnerable to unauthorized access of data via its publicly exposed reset-password endpoint. The plugin looks up the 'valid_email' value based solely on a supplied username parameter, without verifying that the requester is associated with that user account. This allows unauthenticated attackers to enumerate email addresses for any user, including administrators. |
| A vulnerability was found in Apeman ID71 218.53.203.117. The impacted element is an unknown function of the file /onvif/device_service of the component ONVIF Service. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Northern.tech Mender 3.3.x before 3.3.2, 3.5.x before 3.5.0, and 3.6.x before 3.6.0 has Incorrect Access Control and allows users to change their roles and could allow privilege escalation from a low-privileged read-only user to a high-privileged user. |
| Improper access control for some Intel(R) Wireless Bluetooth products for Windows before version 23.20 may allow an authenticated user to potentially enable denial of service via local access. |
| An issue was discovered in AlertEnterprise Guardian 4.1.14.2.2.1. One can bypass manager approval via isAddedByApprover in a Request%20Building%20Access requestSubmit API call. The vendor has stated that the system is protected by updating to a version equal to or greater than one of the following build numbers: 4.1.12.2.1.19, 4.1.12.5.2.36, 4.1.13.0.60, 4.1.13.2.0.3.39, 4.1.13.2.0.3.41, 4.1.13.2.42, 4.1.13.2.25.44, 4.1.14.0.13, 4.1.14.0.43, 4.1.14.0.48, and 4.1.14.1.5.32. |
| There is no memory isolation between CPU cores of the MIB3 infotainment. This fact allows an attacker with access to the main operating system to compromise the CPU core responsible for CAN message processing.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| Improper authentication handling was identified in a set of HTTP POST requests affecting the following product families:
* Digi PortServer TS - prior to and including 82000747_AA, build date 06/17/2022
* Digi One SP/Digi One SP IA/Digi One IA - prior to and including 82000774_Z, build date 10/19/2020
* Digi One IAP – prior to and including 82000770 Z, build date 10/19/2020
A specially crafted POST request to the device’s web interface may allow an unauthenticated attacker to modify configuration settings. |
| Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the "persist.sys.tctPowerIccid" system property to indirectly obtain the ICCID. |
