Search vulnerabilities

Expected end of text, found ':' (at char 6), (line:1, col:7)
Use the Query Builder to create your own search query, or check out the documentation to learn the search syntax.

Results 425,803

CVE-2026-54333

UEFI Firmware Parser: Stack out-of-bounds write in tiano decompressor MakeTable

UEFI Firmware Parser parses BIOS, Intel ME, and UEFI firmware structures including volumes, file systems, and files. Prior to 1.14, MakeTable() in uefi_firmware/compression/Tiano/Decompress.c does not validate that bit-length values read from a crafted Tiano or EFI compressed firmware bitstream remain within the expected range from 0 through 16. The normal CompressedSection.process() to efi_compressor.TianoDecompress() to TianoDecompress() to ReadPTLen() to MakeTable() parsing path can consequently write beyond the stack-allocated Count[17] array and related decode tables. The resulting stack corruption deterministically crashes the parsing process and may permit code execution depending on build and runtime details. This issue is fixed in version 1.14.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Theopolis
Products
Uefi-firmware-parser
CVE-2026-54334

UEFI Firmware Parser: Heap out-of-bounds write in tiano decompressor `ReadCLen`

UEFI Firmware Parser parses BIOS, Intel ME, and UEFI firmware structures including volumes, file systems, and files. Prior to 1.14, ReadCLen() in uefi_firmware/compression/Tiano/Decompress.c reads Number from GetBits(Sd, CBIT) with CBIT = 9 and can obtain 511 entries for the 510-element Sd->mCLen heap array because its loop does not enforce Index < NC. The CharC == 2 run-length path can additionally request up to 531 zero writes through Sd->mCLen[Index++] = 0. The normal CompressedSection.process() to efi_compressor.TianoDecompress() to TianoDecompress() to DecodeC() to ReadCLen() parsing path therefore permits crafted Tiano or EFI compressed firmware to corrupt heap memory, deterministically crash the parsing process, and potentially execute code depending on build and runtime details. This issue is fixed in version 1.14.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Theopolis
Products
Uefi-firmware-parser
CVE-2026-54559

PocketSphinx: Buffer overflows in language and acoustic model loading code

PocketSphinx is a small speech recognizer. Prior to 5.1.1, the trie language-model loaders in src/lm/ngram_model_trie.c do not adequately validate boundary conditions in ARPA, DMP, and binary format headers, and the acoustic-model loaders in src/mdef.c and src/util/bio.c use sscanf with unbounded string fields. Loading an invalid, corrupted, or malicious language or acoustic model can therefore cause stack or heap buffer overflows and memory corruption. An attacker who can write to a directory selected by POCKETSPHINX_PATH can replace or add a model file that PocketSphinx later loads; users of PocketSphinx 5prealpha have no backported patch and must migrate to the fixed release. This issue is fixed in version 5.1.1.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Cmusphinx
Products
Pocketsphinx
CVE-2026-68489

Ruby: Node.js Toolkit: Plesk Extensions Ruby and Node.js Toolkit: Arbitrary Code Execution via Static Code Injection

Static Code Injection in Plesk extensions "Ruby" before 1.6.6 and "Node.js Toolkit" before 2.5.0 allows remote authenticated users to execute arbitrary code as root via custom environment variables.

CVSS 4.0 · 8.7 High EPSS < 1% KEV · Not listed
Vendors
Webpros
Products
Plesk Extension "node.js Toolkit" Plesk Extension "ruby"
CVE-2026-90896

Missing authentication in Ecommerce Template checkout session endpoint allows unauthenticated disclosure of buyer PII

Missing Authentication for Critical Function (CWE-306) in the checkout session lookup handler (src/app/api/stripe/checkout_sessions/route.ts), exposed at GET /api/stripe/checkout_sessions, in MarcosCamara01 Ecommerce Template before commit 91e273c allows a remote, unauthenticated attacker holding a valid Stripe Checkout Session id (cs_...) to retrieve the full session object, including the buyer's name, email, phone, billing address, amount paid and internal userId, because the GET handler calls stripe.checkout.sessions.retrieve() and returns the result without checking for an authenticated session or session ownership. Sibling endpoints such as POST /api/stripe/payment already enforced authentication via auth.api.getSession(); this endpoint had no access control whatsoever. The session_id is exposed in the buyer's own browser URL after payment (success_url = /result?session_id={CHECKOUT_SESSION_ID}), so it leaks through Referer headers, analytics tools, server access logs and shared-machine browser history, resulting in disclosure of the buyer's personal data to an unauthenticated actor.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Marcoscamara01
Products
Ecommerce-template Ecommerce Template
CVE-2026-91143

goproxy through 15.3 Authentication Bypass via CONNECT

goproxy through 15.3 fails to apply HTTP proxy basic authentication to CONNECT tunnel requests, allowing unauthenticated clients to bypass credential requirements. Attackers can issue CONNECT requests to establish tunnels through the authenticated proxy without providing credentials, enabling arbitrary TCP traffic relay and access to restricted destinations.

CVSS 4.0 · 6.9 Medium EPSS < 1% KEV · Not listed
Vendors
Goproxy Project Snail007
Products
Goproxy Goproxy
CVE-2026-91145

Activiti through 7.1.0.M6 Expression Injection via Mail Task

Activiti through 7.1.0.M6 fails to validate hash-brace deferred expressions in process variables, allowing attackers to bypass expression filtering. Attackers can inject expressions beginning with #{ that are stored and later evaluated in the full Spring context when a mail task uses variable-backed body fields, enabling method invocation on application beans.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Activiti
Products
Activiti
CVE-2026-91197

Flowable flowable-engine through 8.0.0 XXE via ProcessDiagramLayoutFactory

Flowable flowable-engine through 8.0.0 contains an XML external entity injection vulnerability in ProcessDiagramLayoutFactory.parseXml() that fails to disable external entity resolution when parsing deployed BPMN resources. Attackers with process deployment privileges can embed DOCTYPE declarations with external entities in BPMN files to read arbitrary local files or trigger requests to internal network endpoints when diagram layout is computed.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Flowable
Products
Flowable-engine
CVE-2026-85657

Co-Authors, Multiple Authors and Guest Authors in an Author Box with PublishPress Authors <= 4.15.0 - Authenticated (Author+) Stored Cross-Site Scripting via 'profile_fields_user_email_value_prefix' Parameter

The Co-Authors, Multiple Authors and Guest Authors in an Author Box with PublishPress Authors plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘profile_fields_user_email_value_prefix’ parameter in all versions up to, and including, 4.15.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user clicks on a link.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
Publishpress Wordpress
Products
Co-authors, Multiple Authors And Guest Authors In An Author Box With Publishpress Authors Wordpress
CVE-2026-91770

IceHRM before 36.0.0 Broken Access Control via Employee ID

IceHRM before 36.0.0 fails to validate employee ownership on seven REST sub-resource endpoints, allowing authenticated employees to read any colleague's HR records. Attackers can substitute arbitrary employee IDs in skill, education, certification, language, leave, attendance, and status endpoints to access sensitive personnel data.

CVSS 4.0 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Gamonoid Icehrm
Products
Icehrm Icehrm
CVE-2026-90711

proxy-addr vulnerable to IP spoofing via IPv4-mapped IPv6 trust subnet

proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Proxy-addr
Products
Proxy-addr
CVE-2026-18063

Job Postings <= 2.8.1 - Authenticated (Contributor+) Stored Cross-Site Scripting via 'position_button' Parameter

The Job Postings plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'position_button' parameter in all versions up to, and including, 2.8.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

CVSS 3.1 · 6.4 Medium EPSS < 1% KEV · Not listed
Vendors
Blueglassch Wordpress
Products
Job Postings Wordpress
CVE-2026-15609

Bridge - Creative Multipurpose WordPress Theme <= 30.8.9.1 - Authenticated (Contributor+) Stored Cross-Site Scripting via 'circle_line' Shortcode Attribute

The Bridge - Creative Multipurpose WordPress Theme theme for WordPress is vulnerable to Stored Cross-Site Scripting via 'circle_line' Shortcode Attribute in all versions up to, and including, 30.8.9.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

CVSS 3.1 · 6.4 Medium EPSS < 1% KEV · Not listed
Vendors
Qode Wordpress
Products
Bridge - Creative Multipurpose Wordpress Theme Wordpress
CVE-2026-14805

Consulting - Business, Finance WordPress Theme <= 6.7.16 - Authenticated (Subscriber+) Privilege Escalation via AJAX

The Consulting theme for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 6.7.16. This is due to a combination of two flaws: (1) the masterstudy_ms_stm_set_discard_transient AJAX endpoint in admin/admin-notices/classes/STMHandler.php accepts an arbitrary transient key without capability checks or nonce validation, and (2) the developer access login mechanism in admin/classes/stm-theme-support.php authenticates users based on a transient value without proper cryptographic validation when in legacy string mode. This makes it possible for authenticated attackers, with subscriber-level access and above, to set the stm_developer_access_token transient to a known value (1), then authenticate as any existing user including administrators by visiting a specially crafted URL, thereby achieving full privilege escalation to administrator.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Stylemixthemes Wordpress
Products
Consulting - Business, Finance Wordpress Theme Wordpress
CVE-2026-16140

OpenBMC IPMI Privilege Escalation via Retargeted RAKP 1

OpenBMC's IPMI implementation, phosphor-net-ipmid, is vulnerable to a logic flaw where the authorization context of an existing session can be replaced with a target account while still maintaining the original integrity and encryption keys. Several downstream vendors implement phosphor-net-ipmid as their IPMI stack, such as NVIDIA and H3C. This issue effectively allows for privilege escalation without re-authentication.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Openbmc
Products
Phosphor-net-ipmid
CVE-2026-16141

OpenBMC IPMI Authentication Bypass via Default userKey and Stale Challenge Value

OpenBMC's IPMI implementation, phosphor-net-ipmid, contains a logic flaw in which an unauthenticated client can force the RAKP Message 1 handler to return before it overwrites the authentication object's constructor defaults. The IPMI service then accepts a RAKP Message 3 whose HMAC is computed with the constant 20-byte 'userKey' initialized from the string '0penBmc' and an often-predictable 'bmcRandomNum'. Several downstream vendors implement phosphor-net-ipmid as their IPMI stack, such as NVIDIA and H3C.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Openbmc
Products
Phosphor-net-ipmid
CVE-2026-46495

OpenDJ Pre-Auth RCE via Java Deserialization in JMX RMI

OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.1, the JMX RMI connector in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiConnector.java processes attacker-controlled credential objects before authentication without a restrictive jmx.remote.rmi.server.credentials.filter.pattern, and RmiAuthenticator.authenticate in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiAuthenticator.java accepts an unconstrained Object array rather than a two-element String[]. When the JMX Connection Handler is enabled and its TCP listener is reachable, an unauthenticated remote attacker can submit a crafted serialized Java object and achieve code execution in the OpenDJ server process. The handler is disabled by default, and successful exploitation depends on the runtime classpath and Java version; remote code execution was demonstrated against OpenDJ 4.4.15 on JDK 11 with Jackson 2.12.6.1. This issue is fixed in 5.1.1.

CVSS 4.0 · 9.2 Critical EPSS 1.1% KEV · Not listed
Vendors
Openidentityplatform
Products
Opendj
CVE-2026-57586

CodeRAG: Gradle Wrapper Execution During Dependency Discovery Enables Arbitrary Code Execution

CodeRAG is a lightweight semantic code search and distillation utility for AI coding agents. Prior to 1.3.1, the default agent-coderag sync flow in code_rag/entry/cli.py calls sync_dependencies for an indexed path, and code_rag/core/manager.py treats build.gradle or build.gradle.kts as sufficient to invoke _sync_gradle. _sync_gradle prefers a repository-controlled gradlew or gradlew.bat file and passes it directly to asyncio.create_subprocess_exec with the repository root as the working directory; validate_path in code_rag/core/utils.py constrains the directory location but does not validate the executable's content or integrity. A victim who indexes an attacker-controlled Gradle repository therefore executes attacker-supplied code with the victim's operating-system privileges, allowing disclosure, modification, persistence, or denial of service in the user environment. This issue is fixed in 1.3.1.

CVSS 3.1 · 8.6 High EPSS < 1% KEV · Not listed
Vendors
Naranor
Products
Agent-coderag
CVE-2026-54168

Pipelines-as-Code: Unscoped GitHub App installation token allows unauthorized access to private repositories via remote task resolution

Pipelines-as-Code is a CI/CD system that lets users define Tekton pipelines in source code repositories. Prior to 0.37.8, 0.39.6, 0.42.1, and 0.48.0, a GitHub App installation token created during webhook processing is not scoped to the repository that triggered the event when the App is installed across multiple repositories. A user with push access to one repository can submit a PipelineRun containing a pipelinesascode.tekton.dev/task remote task annotation that targets a private repository in the same installation. When ScopeTokenToListOfRepos returns no explicit scope, the missing triggering repository ID leaves the token able to access the entire installation. Pipelines-as-Code resolves and inlines the remote private task with that token, disclosing the repository's Tekton definitions. The demonstrated impact is read-only and does not provide write access. This issue is fixed in versions 0.37.8, 0.39.6, 0.42.1, and 0.48.0.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Tektoncd
Products
Pipelines-as-code