| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix UAF in cifs_demultiplex_thread()
There is a UAF when xfstests on cifs:
BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160
Read of size 4 at addr ffff88810103fc08 by task cifsd/923
CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45
...
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
kasan_check_range+0x145/0x1a0
smb2_is_network_name_deleted+0x27/0x160
cifs_demultiplex_thread.cold+0x172/0x5a4
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 923:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_slab_alloc+0x54/0x60
kmem_cache_alloc+0x147/0x320
mempool_alloc+0xe1/0x260
cifs_small_buf_get+0x24/0x60
allocate_buffers+0xa1/0x1c0
cifs_demultiplex_thread+0x199/0x10d0
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
Freed by task 921:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x143/0x1b0
kmem_cache_free+0xe3/0x4d0
cifs_small_buf_release+0x29/0x90
SMB2_negotiate+0x8b7/0x1c60
smb2_negotiate+0x51/0x70
cifs_negotiate_protocol+0xf0/0x160
cifs_get_smb_ses+0x5fa/0x13c0
mount_get_conns+0x7a/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The UAF is because:
mount(pid: 921) | cifsd(pid: 923)
-------------------------------|-------------------------------
| cifs_demultiplex_thread
SMB2_negotiate |
cifs_send_recv |
compound_send_recv |
smb_send_rqst |
wait_for_response |
wait_event_state [1] |
| standard_receive3
| cifs_handle_standard
| handle_mid
| mid->resp_buf = buf; [2]
| dequeue_mid [3]
KILL the process [4] |
resp_iov[i].iov_base = buf |
free_rsp_buf [5] |
| is_network_name_deleted [6]
| callback
1. After send request to server, wait the response until
mid->mid_state != SUBMITTED;
2. Receive response from server, and set it to mid;
3. Set the mid state to RECEIVED;
4. Kill the process, the mid state already RECEIVED, get 0;
5. Handle and release the negotiate response;
6. UAF.
It can be easily reproduce with add some delay in [3] - [6].
Only sync call has the problem since async call's callback is
executed in cifsd process.
Add an extra state to mark the mid state to READY before wakeup the
waitter, then it can get the resp safely. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: do not queue data on closed subflows
Dipanjan reported a syzbot splat at close time:
WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153
inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Modules linked in: uio_ivshmem(OE) uio(E)
CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE
5.19.0-rc6-g2eae0556bb9d #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153
Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91
f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b
e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d
RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00
RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002
RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000
R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400
R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258
FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0
Call Trace:
<TASK>
__sk_destruct+0x4f/0x8e0 net/core/sock.c:2067
sk_destruct+0xbd/0xe0 net/core/sock.c:2112
__sk_free+0xef/0x3d0 net/core/sock.c:2123
sk_free+0x78/0xa0 net/core/sock.c:2134
sock_put include/net/sock.h:1927 [inline]
__mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351
__mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828
mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586
process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289
worker_thread+0x623/0x1070 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
The root cause of the problem is that an mptcp-level (re)transmit can
race with mptcp_close() and the packet scheduler checks the subflow
state before acquiring the socket lock: we can try to (re)transmit on
an already closed ssk.
Fix the issue checking again the subflow socket status under the
subflow socket lock protection. Additionally add the missing check
for the fallback-to-tcp case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm rq: don't queue request to blk-mq during DM suspend
DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue.
But blk-mq's unquiesce may come from outside events, such as elevator
switch, updating nr_requests or others, and request may come during
suspend, so simply ask for blk-mq to requeue it.
Fixes one kernel panic issue when running updating nr_requests and
dm-mpath suspend/resume stress test. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: Fix possible memory leak in ptp_clock_register()
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88800906c618 (size 8):
comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s)
hex dump (first 8 bytes):
70 74 70 30 00 00 00 00 ptp0....
backtrace:
[<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0
[<0000000079f6e2ff>] kvasprintf+0xb5/0x150
[<0000000026aae54f>] kvasprintf_const+0x60/0x190
[<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150
[<000000004e35abdd>] dev_set_name+0xc0/0x100
[<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp]
[<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33]
When posix_clock_register() returns an error, the name allocated
in dev_set_name() will be leaked, the put_device() should be used
to give up the device reference, then the name will be freed in
kobject_cleanup() and other memory will be freed in ptp_clock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
In current code, when a PCI error state pci_channel_io_normal is detectd,
it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI
driver will continue the execution of PCI resume callback report_resume by
pci_walk_bridge, and the callback will go into amdgpu_pci_resume
finally, where write lock is releasd unconditionally without acquiring
such lock first. In this case, a deadlock will happen when other threads
start to acquire the read lock.
To fix this, add a member in amdgpu_device strucutre to cache
pci_channel_state, and only continue the execution in amdgpu_pci_resume
when it's pci_channel_io_frozen. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't call rq_qos_ops->done_bio if the bio isn't tracked
rq_qos framework is only applied on request based driver, so:
1) rq_qos_done_bio() needn't to be called for bio based driver
2) rq_qos_done_bio() needn't to be called for bio which isn't tracked,
such as bios ended from error handling code.
Especially in bio_endio():
1) request queue is referred via bio->bi_bdev->bd_disk->queue, which
may be gone since request queue refcount may not be held in above two
cases
2) q->rq_qos may be freed in blk_cleanup_queue() when calling into
__rq_qos_done_bio()
Fix the potential kernel panic by not calling rq_qos_ops->done_bio if
the bio isn't tracked. This way is safe because both ioc_rqos_done_bio()
and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm80xx: Fix memory leak during rmmod
Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.
Properly free memory when the module is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix link down processing to address NULL pointer dereference
If an FC link down transition while PLOGIs are outstanding to fabric well
known addresses, outstanding ABTS requests may result in a NULL pointer
dereference. Driver unload requests may hang with repeated "2878" log
messages.
The Link down processing results in ABTS requests for outstanding ELS
requests. The Abort WQEs are sent for the ELSs before the driver had set
the link state to down. Thus the driver is sending the Abort with the
expectation that an ABTS will be sent on the wire. The Abort request is
stalled waiting for the link to come up. In some conditions the driver may
auto-complete the ELSs thus if the link does come up, the Abort completions
may reference an invalid structure.
Fix by ensuring that Abort set the flag to avoid link traffic if issued due
to conditions where the link failed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Return CQE error if invalid lkey was supplied
RXE is missing update of WQE status in LOCAL_WRITE failures. This caused
the following kernel panic if someone sent an atomic operation with an
explicitly wrong lkey.
[leonro@vm ~]$ mkt test
test_atomic_invalid_lkey (tests.test_atomic.AtomicTest) ...
WARNING: CPU: 5 PID: 263 at drivers/infiniband/sw/rxe/rxe_comp.c:740 rxe_completer+0x1a6d/0x2e30 [rdma_rxe]
Modules linked in: crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel rdma_ucm rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core ptp pps_core
CPU: 5 PID: 263 Comm: python3 Not tainted 5.13.0-rc1+ #2936
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:rxe_completer+0x1a6d/0x2e30 [rdma_rxe]
Code: 03 0f 8e 65 0e 00 00 3b 93 10 06 00 00 0f 84 82 0a 00 00 4c 89 ff 4c 89 44 24 38 e8 2d 74 a9 e1 4c 8b 44 24 38 e9 1c f5 ff ff <0f> 0b e9 0c e8 ff ff b8 05 00 00 00 41 bf 05 00 00 00 e9 ab e7 ff
RSP: 0018:ffff8880158af090 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888016a78000 RCX: ffffffffa0cf1652
RDX: 1ffff9200004b442 RSI: 0000000000000004 RDI: ffffc9000025a210
RBP: dffffc0000000000 R08: 00000000ffffffea R09: ffff88801617740b
R10: ffffed1002c2ee81 R11: 0000000000000007 R12: ffff88800f3b63e8
R13: ffff888016a78008 R14: ffffc9000025a180 R15: 000000000000000c
FS: 00007f88b622a740(0000) GS:ffff88806d540000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88b5a1fa10 CR3: 000000000d848004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_rcv+0xb11/0x1df0 [rdma_rxe]
rxe_loopback+0x157/0x1e0 [rdma_rxe]
rxe_responder+0x5532/0x7620 [rdma_rxe]
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_rcv+0x9c8/0x1df0 [rdma_rxe]
rxe_loopback+0x157/0x1e0 [rdma_rxe]
rxe_requester+0x1efd/0x58c0 [rdma_rxe]
rxe_do_task+0x130/0x230 [rdma_rxe]
rxe_post_send+0x998/0x1860 [rdma_rxe]
ib_uverbs_post_send+0xd5f/0x1220 [ib_uverbs]
ib_uverbs_write+0x847/0xc80 [ib_uverbs]
vfs_write+0x1c5/0x840
ksys_write+0x176/0x1d0
do_syscall_64+0x3f/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Fix another memory leak in error handling paths
Memory allocated by 'vmbus_alloc_ring()' at the beginning of the probe
function is never freed in the error handling path.
Add the missing 'vmbus_free_ring()' call.
Note that it is already freed in the .remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock when cloning inline extents and using qgroups
There are a few exceptional cases where cloning an inline extent needs to
copy the inline extent data into a page of the destination inode.
When this happens, we end up starting a transaction while having a dirty
page for the destination inode and while having the range locked in the
destination's inode iotree too. Because when reserving metadata space
for a transaction we may need to flush existing delalloc in case there is
not enough free space, we have a mechanism in place to prevent a deadlock,
which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when
cloning inline extent and low on free metadata space").
However when using qgroups, a transaction also reserves metadata qgroup
space, which can also result in flushing delalloc in case there is not
enough available space at the moment. When this happens we deadlock, since
flushing delalloc requires locking the file range in the inode's iotree
and the range was already locked at the very beginning of the clone
operation, before attempting to start the transaction.
When this issue happens, stack traces like the following are reported:
[72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000
[72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142)
[72747.556271] Call Trace:
[72747.556273] __schedule+0x296/0x760
[72747.556277] schedule+0x3c/0xa0
[72747.556279] io_schedule+0x12/0x40
[72747.556284] __lock_page+0x13c/0x280
[72747.556287] ? generic_file_readonly_mmap+0x70/0x70
[72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs]
[72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160
[72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs]
[72747.556362] ? update_group_capacity+0x25/0x210
[72747.556366] ? cpumask_next_and+0x1a/0x20
[72747.556391] extent_writepages+0x44/0xa0 [btrfs]
[72747.556394] do_writepages+0x41/0xd0
[72747.556398] __writeback_single_inode+0x39/0x2a0
[72747.556403] writeback_sb_inodes+0x1ea/0x440
[72747.556407] __writeback_inodes_wb+0x5f/0xc0
[72747.556410] wb_writeback+0x235/0x2b0
[72747.556414] ? get_nr_inodes+0x35/0x50
[72747.556417] wb_workfn+0x354/0x490
[72747.556420] ? newidle_balance+0x2c5/0x3e0
[72747.556424] process_one_work+0x1aa/0x340
[72747.556426] worker_thread+0x30/0x390
[72747.556429] ? create_worker+0x1a0/0x1a0
[72747.556432] kthread+0x116/0x130
[72747.556435] ? kthread_park+0x80/0x80
[72747.556438] ret_from_fork+0x1f/0x30
[72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
[72747.566961] Call Trace:
[72747.566964] __schedule+0x296/0x760
[72747.566968] ? finish_wait+0x80/0x80
[72747.566970] schedule+0x3c/0xa0
[72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs]
[72747.566999] ? finish_wait+0x80/0x80
[72747.567024] lock_extent_bits+0x37/0x90 [btrfs]
[72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs]
[72747.567051] ? find_get_pages_range_tag+0x2cd/0x380
[72747.567076] __extent_writepage+0x203/0x320 [btrfs]
[72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs]
[72747.567106] ? update_load_avg+0x7e/0x5f0
[72747.567109] ? enqueue_entity+0xf4/0x6f0
[72747.567134] extent_writepages+0x44/0xa0 [btrfs]
[72747.567137] ? enqueue_task_fair+0x93/0x6f0
[72747.567140] do_writepages+0x41/0xd0
[72747.567144] __filemap_fdatawrite_range+0xc7/0x100
[72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs]
[72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs]
[72747.567200] process_one_work+0x1aa/0x340
[72747.567202] worker_thread+0x30/0x390
[72747.567205] ? create_worker+0x1a0/0x1a0
[72747.567208] kthread+0x116/0x130
[72747.567211] ? kthread_park+0x80/0x80
[72747.567214] ret_from_fork+0x1f/0x30
[72747.569686] task:fsstress state:D stack:
---truncated--- |
| IBM InfoSphere Information 11.7 Server authenticated user to obtain sensitive information when a detailed technical error message is returned in a request. This information could be used in further attacks against the system. |
| IBM InfoSphere Information Server 11.7 DataStage Flow Designer
transmits sensitive information via URL or query parameters that could be exposed to an unauthorized actor using man in the middle techniques. |
| IBM Maximo Asset Management 7.6.1.3 is vulnerable to stored cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| IBM Operational Decision Manager 8.11.0.1, 8.11.1.0, 8.12.0.1, and 9.0.0.1 is vulnerable to cross-site scripting. This vulnerability allows an unauthenticated attacker to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| IBM MQ Container when used with the IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1, and MQ Operator SC2 3.2.0 through 3.2.10 and configured with Cloud Pak for Integration Keycloak could disclose sensitive information to a privileged user. |
| IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1, and MQ Operator SC2 3.2.0 through 3.2.10
Client connecting to a MQ Queue Manager can cause a SIGSEGV in the AMQRMPPA channel process terminating it. |
| IBM Db2 for Linux, UNIX and Windows 12.1.0 and 12.1.1 is vulnerable to a denial of service as the server may crash under certain conditions with a specially crafted query. |
| IBM Concert Software 1.0.0 through 1.0.5 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| IBM Concert Software 1.0.0 through 1.0.5 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. |
