| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion.
The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS.
Two compression algorithms are affected:
* zlib: Activates immediately after key exchange, enabling unauthenticated attacks
* zlib@openssh.com: Activates post-authentication, enabling authenticated attacks
Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments.
This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4.
This issue affects OTP from OTP 17.0 until OTP 28.4.1, 27.3.4.9 and 26.2.5.18 corresponding to ssh from 3.0.1 until 5.5.1, 5.2.11.6 and 5.1.4.14. |
| Improper permission enforcement in Checkmk versions 2.4.0 before 2.4.0p23, 2.3.0 before 2.3.0p43, and 2.2.0 (EOL) allows authenticated users to enumerate existing hosts by observing different HTTP response codes in agent-receiver/register_existing endpoint, which could lead to information disclosure. |
| Anchore Enterprise versions before 5.25.1 contain an SQL injection vulnerability in the GraphQL Reports API. An authenticated attacker that is able to access the GraphQL API could execute arbitrary SQL instructions resulting in modifications to the data contained in the Anchore Enterprise database. |
| HMS Networks Ewon Flexy with firmware before 15.0s4, Cosy+ with firmware 22.xx before 22.1s6, and Cosy+ with firmware 23.xx before 23.0s3 have improper neutralization of special elements used in an OS command allowing remote code execution by attackers with low privilege access on the gateway, provided the attacker has credentials. |
| HMS Networks Ewon Flexy with firmware before 15.0s4, Cosy+ with firmware 22.xx before 22.1s6, and Cosy+ with firmware 23.xx before 23.0s3 have weak entropy for authentication cookies, allowing an attacker with a stolen session cookie to find the user password by brute-forcing an encryption parameter. |
| Improper permission enforcement in Checkmk versions 2.4.0 before 2.4.0p23, 2.3.0 before 2.3.0p43, and 2.2.0 (EOL) allows unauthenticated users to enumerate existing hosts by observing different HTTP response codes in deploy_agent endpoint, which could lead to information disclosure. |
| The GetGenie plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.3.2. This is due to missing validation on the `id` parameter in the `create()` method of the `GetGenieChat` REST API endpoint. The method accepts a user-controlled post ID and, when a post with that ID exists, calls `wp_update_post()` without verifying that the current user owns the post or that the post is of the expected `getgenie_chat` type. This makes it possible for authenticated attackers, with Author-level access and above, to overwrite arbitrary posts owned by any user — including Administrators — effectively destroying the original content by changing its `post_type` to `getgenie_chat` and reassigning `post_author` to the attacker. |
| The Formidable Forms plugin for WordPress is vulnerable to an authorization bypass through user-controlled key in all versions up to, and including, 6.28. This is due to the `frm_strp_amount` AJAX handler (`update_intent_ajax`) overwriting the global `$_POST` data with attacker-controlled JSON input and then using those values to recalculate payment amounts via field shortcode resolution in `generate_false_entry()`. The handler relies on a nonce that is publicly exposed in the page's JavaScript (`frm_stripe_vars.nonce`), which provides CSRF protection but not authorization. This makes it possible for unauthenticated attackers to manipulate PaymentIntent amounts before payment completion on forms using dynamic pricing with field shortcodes, effectively paying a reduced amount for goods or services. |
| The Formidable Forms plugin for WordPress is vulnerable to a payment integrity bypass in all versions up to, and including, 6.28. This is due to the Stripe Link return handler (`handle_one_time_stripe_link_return_url`) marking payment records as complete based solely on the Stripe PaymentIntent status without comparing the intent's charged amount against the expected payment amount, and the `verify_intent()` function validating only client secret ownership without binding intents to specific forms or actions. This makes it possible for unauthenticated attackers to reuse a PaymentIntent from a completed low-value payment to mark a high-value payment as complete, effectively bypassing payment for goods or services. |
| calibre is a cross-platform e-book manager for viewing, converting, editing, and cataloging e-books. Prior to 9.5.0, a path traversal vulnerability in the RocketBook (.rb) input plugin (src/calibre/ebooks/rb/reader.py) allows an attacker to write arbitrary files to any path writable by the calibre process when a user opens or converts a crafted .rb file. This is the same bug class fixed in CVE-2026-26065 for the PDB readers, but the fix was never applied to the RB reader. This vulnerability is fixed in 9.5.0. |
| SFTPGo is an open source, event-driven file transfer solution. In SFTPGo versions prior to 2.7.1, a path normalization discrepancy between the protocol handlers and the internal Virtual Filesystem routing can lead to an authorization bypass. An authenticated attacker can craft specific file paths to bypass folder-level permissions or escape the boundaries of a configured Virtual Folder. This vulnerability is fixed in 2.7.1. |
| SFTPGo is an open source, event-driven file transfer solution. SFTPGo versions before v2.7.1 contain an input validation issue in the handling of dynamic group paths, for example, home directories or key prefixes. When a group is configured with a dynamic home directory or key prefix using placeholders like %username%, the value replacing the placeholder is not strictly sanitized against relative path components. Consequently, if a user is created with a specially crafted username the resulting path may resolve to a parent directory instead of the intended sub-directory. This issue is fixed in version v2.7.1 |
| Gokapi is a self-hosted file sharing server with automatic expiration and encryption support. Prior to 2.2.4, An insufficient authorization check in the file replace API allows a user with only list visibility permission (UserPermListOtherUploads) to delete another user's file by abusing the deleteNewFile flag, bypassing the requirement for UserPermDeleteOtherUploads. This vulnerability is fixed in 2.2.4. |
| Gokapi is a self-hosted file sharing server with automatic expiration and encryption support. Prior to 2.2.4, An API endpoint accepts unbounded request bodies without any size limit. An authenticated user can cause an OOM kill and complete service disruption for all users. This vulnerability is fixed in 2.2.4. |
| Gokapi is a self-hosted file sharing server with automatic expiration and encryption support. Prior to 2.2.4, the chunked upload completion path for file requests does not validate the total file size against the per-request MaxSize limit. An attacker with a public file request link can split an oversized file into chunks each under MaxSize and upload them sequentially, bypassing the size restriction entirely. Files up to the server's global MaxFileSizeMB are accepted regardless of the file request's configured limit. This vulnerability is fixed in 2.2.4. |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to v4.10.16-lts, JumpServer improperly validates certificates in the Custom SMS API Client. When JumpServer sends MFA/OTP codes via Custom SMS API, an attacker can intercept the request and capture the verification code BEFORE it reaches the user's phone. This vulnerability is fixed in v4.10.16-lts. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0. |
| Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. From 0.13.0 to before 0.13.9, a specially crafted WindowUpdate can cause arithmetic overflow in send-window accounting, which triggers a panic in the connection state machine. This is remotely reachable over a normal network connection and does not require authentication. This vulnerability is fixed in 0.13.9. |
| JumpServer is an open source bastion host and an operation and maintenance security audit system. a Server-Side Template Injection (SSTI) vulnerability exists in JumpServer's Applet and VirtualApp upload functionality. This vulnerability can only be exploited by users with administrative privileges (Application Applet Management or Virtual Application Management permissions). Attackers can exploit this vulnerability to execute arbitrary code within the JumpServer Core container. The vulnerability arises from unsafe use of Jinja2 template rendering when processing user-uploaded YAML configuration files. When a user uploads an Applet or VirtualApp ZIP package, the manifest.yml file is rendered through Jinja2 without sandbox restrictions, allowing template injection attacks. |
| Dagu is a workflow engine with a built-in Web user interface. Prior to 2.2.4, when Dagu is configured with HTTP Basic authentication (DAGU_AUTH_MODE=basic), all Server-Sent Events (SSE) endpoints are accessible without any credentials. This allows unauthenticated attackers to access real-time DAG execution data, workflow configurations, execution logs, and queue status — bypassing the authentication that protects the REST API. The buildStreamAuthOptions() function builds authentication options for SSE/streaming endpoints. When the auth mode is basic, it returns an auth.Options struct with BasicAuthEnabled: true but AuthRequired defaults to false (Go zero value). The authentication middleware at internal/service/frontend/auth/middleware.go allows unauthenticated requests when AuthRequired is false. This vulnerability is fixed in 2.2.4. |
