| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix leak of 'r10bio->remaining' for recovery
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid. |
| Authorization Bypass Through User-Controlled Key vulnerability with user privileges in ArgusTech BILGER allows Exploitation of Trusted Identifiers.This issue affects BILGER: before 2.4.6. |
| Insertion of Sensitive Information Into Sent Data vulnerability in ArgusTech BILGER allows Choosing Message Identifier.This issue affects BILGER: before 2.4.6. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix shift-out-of-bounds in exponential backoff
The ENA adapters on our instances occasionally reset. Once recently
logged a UBSAN failure to console in the process:
UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
Workqueue: ena ena_fw_reset_device [ena]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
? __const_udelay+0x43/0x50
ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
wait_for_reset_state+0x54/0xa0 [ena]
ena_com_dev_reset+0xc8/0x110 [ena]
ena_down+0x3fe/0x480 [ena]
ena_destroy_device+0xeb/0xf0 [ena]
ena_fw_reset_device+0x30/0x50 [ena]
process_one_work+0x22b/0x3d0
worker_thread+0x4d/0x3f0
? process_one_work+0x3d0/0x3d0
kthread+0x12a/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.
Looking at the code, the current timeout is capped at 5000us. Using a
base value of 100us, the current code will overflow after (1<<29). Even
at values before 32, this function wraps around, perhaps
unintentionally.
Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix memory leak in ubifs_sysfs_init()
When insmod ubifs.ko, a kmemleak reported as below:
unreferenced object 0xffff88817fb1a780 (size 8):
comm "insmod", pid 25265, jiffies 4295239702 (age 100.130s)
hex dump (first 8 bytes):
75 62 69 66 73 00 ff ff ubifs...
backtrace:
[<ffffffff81b3fc4c>] slab_post_alloc_hook+0x9c/0x3c0
[<ffffffff81b44bf3>] __kmalloc_track_caller+0x183/0x410
[<ffffffff8198d3da>] kstrdup+0x3a/0x80
[<ffffffff8198d486>] kstrdup_const+0x66/0x80
[<ffffffff83989325>] kvasprintf_const+0x155/0x190
[<ffffffff83bf55bb>] kobject_set_name_vargs+0x5b/0x150
[<ffffffff83bf576b>] kobject_set_name+0xbb/0xf0
[<ffffffff8100204c>] do_one_initcall+0x14c/0x5a0
[<ffffffff8157e380>] do_init_module+0x1f0/0x660
[<ffffffff815857be>] load_module+0x6d7e/0x7590
[<ffffffff8158644f>] __do_sys_finit_module+0x19f/0x230
[<ffffffff815866b3>] __x64_sys_finit_module+0x73/0xb0
[<ffffffff88c98e85>] do_syscall_64+0x35/0x80
[<ffffffff88e00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
When kset_register() failed, we should call kset_put to cleanup it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up
gets called for uninitialized wait queue sp->nvme_ls_waitq.
qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0
qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
RIP: 0010:__wake_up_common+0x4c/0x190
RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__wake_up_common_lock+0x7c/0xc0
qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed
previously in the commits tagged Fixed: below. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: staging: rtl8723bs: Fix locking in _rtw_join_timeout_handler()
Commit 041879b12ddb ("drivers: staging: rtl8192bs: Fix deadlock in
rtw_joinbss_event_prehandle()") besides fixing the deadlock also
modified _rtw_join_timeout_handler() to use spin_[un]lock_irq()
instead of spin_[un]lock_bh().
_rtw_join_timeout_handler() calls rtw_do_join() which takes
pmlmepriv->scanned_queue.lock using spin_[un]lock_bh(). This
spin_unlock_bh() call re-enables softirqs which triggers an oops in
kernel/softirq.c: __local_bh_enable_ip() when it calls
lockdep_assert_irqs_enabled():
[ 244.506087] WARNING: CPU: 2 PID: 0 at kernel/softirq.c:376 __local_bh_enable_ip+0xa6/0x100
...
[ 244.509022] Call Trace:
[ 244.509048] <IRQ>
[ 244.509100] _rtw_join_timeout_handler+0x134/0x170 [r8723bs]
[ 244.509468] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs]
[ 244.509772] ? __pfx__rtw_join_timeout_handler+0x10/0x10 [r8723bs]
[ 244.510076] call_timer_fn+0x95/0x2a0
[ 244.510200] __run_timers.part.0+0x1da/0x2d0
This oops is causd by the switch to spin_[un]lock_irq() which disables
the IRQs for the entire duration of _rtw_join_timeout_handler().
Disabling the IRQs is not necessary since all code taking this lock
runs from either user contexts or from softirqs, switch back to
spin_[un]lock_bh() to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Put the cdns set active part outside the spin lock
The device may be scheduled during the resume process,
so this cannot appear in atomic operations. Since
pm_runtime_set_active will resume suppliers, put set
active outside the spin lock, which is only used to
protect the struct cdns data structure, otherwise the
kernel will report the following warning:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1
Hardware name: Freescale i.MX8QM MEK (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x64/0x80
dump_stack+0x1c/0x38
__might_resched+0x1fc/0x240
__might_sleep+0x68/0xc0
__pm_runtime_resume+0x9c/0xe0
rpm_get_suppliers+0x68/0x1b0
__pm_runtime_set_status+0x298/0x560
cdns_resume+0xb0/0x1c0
cdns3_controller_resume.isra.0+0x1e0/0x250
cdns3_plat_resume+0x28/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
Running the 'kfree_rcu_test' test case [1] results in a splat [2].
The root cause is the kfree_scale_thread thread(s) continue running
after unloading the rcuscale module. This commit fixes that isue by
invoking kfree_scale_cleanup() from rcu_scale_cleanup() when removing
the rcuscale module.
[1] modprobe rcuscale kfree_rcu_test=1
// After some time
rmmod rcuscale
rmmod torture
[2] BUG: unable to handle page fault for address: ffffffffc0601a87
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 11de4f067 P4D 11de4f067 PUD 11de51067 PMD 112f4d067 PTE 0
Oops: 0010 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1798 Comm: kfree_scale_thr Not tainted 6.3.0-rc1-rcu+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:0xffffffffc0601a87
Code: Unable to access opcode bytes at 0xffffffffc0601a5d.
RSP: 0018:ffffb25bc2e57e18 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffffffffc061f0b6 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff962fd0de RDI: ffffffff962fd0de
RBP: ffffb25bc2e57ea8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 000000000000000a R15: 00000000001c1dbe
FS: 0000000000000000(0000) GS:ffff921fa2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc0601a5d CR3: 000000011de4c006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? kvfree_call_rcu+0xf0/0x3a0
? kthread+0xf3/0x120
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x1f/0x30
</TASK>
Modules linked in: rfkill sunrpc ... [last unloaded: torture]
CR2: ffffffffc0601a87
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap api: Fix possible memory leak for vcap_dup_rule()
Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak
occurs. If kzalloc() for duprule succeeds, but the following
kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree
them in the error path.
unreferenced object 0xffff122744c50600 (size 192):
comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s)
hex dump (first 32 bytes):
10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,...
00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'...
backtrace:
[<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8
[<0000000001bedc67>] kmalloc_trace+0x38/0x88
[<00000000b0612f98>] vcap_dup_rule+0x50/0x460
[<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038
[<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494
[<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698
[<00000000c8766299>] kunit_try_run_case+0xe0/0x20c
[<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94
[<00000000f6864acf>] kthread+0x2e8/0x374
[<0000000022e639b3>] ret_from_fork+0x10/0x20 |
| color-string is a parser and generator for CSS color strings. On 8 September 2025, the npm publishing account for color-string was taken over after a phishing attack. Version 2.1.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. This issue has been resolved in 2.1.2. |
| color is a Javascript color conversion and manipulation library. On 8 September 2025, the npm publishing account for color was taken over after a phishing attack. Version 5.0.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issues has been resolved in 5.0.2. |
| debug is a JavaScript debugging utility. On 8 September 2025, the npm publishing account for debug was taken over after a phishing attack. Version 4.4.2 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should upgrade to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue has been resolved in 4.4.3. |
| color-name is a JSON with CSS color names. On 8 September 2025, an npm publishing account for color-name was taken over after a phishing attack. Version 2.0.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 2.0.2. |
| Openfire is an XMPP server licensed under the Open Source Apache License. Openfire’s SASL EXTERNAL mechanism for client TLS authentication contains a vulnerability in how it extracts user identities from X.509 certificates. Instead of parsing the structured ASN.1 data, the code calls X509Certificate.getSubjectDN().getName() and applies a regex to look for CN=. This method produces a provider-dependent string that does not escape special characters. In SunJSSE (sun.security.x509.X500Name), for example, commas and equals signs inside attribute values are not escaped. As a result, a malicious certificate can embed CN= inside another attribute value (e.g. OU="CN=admin,"). The regex will incorrectly interpret this as a legitimate Common Name and extract admin. If SASL EXTERNAL is enabled and configured to map CNs to user accounts, this allows the attacker to impersonate another user. The fix is included in Openfire 5.0.2 and 5.1.0. |
| hackmd-mcp is a Model Context Protocol server for integrating HackMD's note-taking platform with AI assistants. From 1.4.0 to before 1.5.0, hackmd-mcp contains a server-side request forgery (SSRF) vulnerability when the server is run in HTTP transport mode. Arbitrary hackmdApiUrl values supplied via the Hackmd-Api-Url HTTP header or a base64-encoded JSON query parameter are accepted without validation, allowing attackers to redirect outbound API requests to internal network services, access internal endpoints, perform network reconnaissance, and bypass network access controls. The stdio transport mode is not affected because it only accepts stdio requests. The issue is fixed in version 1.5.0, which enforces allowed endpoints and supports the ALLOWED_HACKMD_API_URLS environment variable. Users should update to 1.5.0 or later or apply documented mitigations such as switching to stdio mode, restricting outbound network access, or filtering the Hackmd-Api-Url header and related query parameter via a reverse proxy. |
| color-convert provides plain color conversion functions in JavaScript. On 8 September 2025, the npm publishing account for color-convert was taken over after a phishing attack. Version 3.1.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 3.1.2. |
| error-ex allows error subclassing and stack customization. On 8 September 2025, an npm publishing account for error-ex was taken over after a phishing attack. Version 1.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 1.3.4. |
| is-arrayish checks if an object can be used like an Array. On 8 September 2025, an npm publishing account for is-arrayish was taken over after a phishing attack. Version 0.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 0.3.4. |
| There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file.
Binary-Affected: podman
Upstream-version-introduced: v4.0.0
Upstream-version-fixed: v5.6.1 |
