| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sprd: validate compress buffer sizes against fixed allocations
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sti: initialize IRQ lock before requesting IRQ
uni_reader_init() registers the shared IRQ before initializing
reader->irq_lock. A pending interrupt can invoke the handler while the
lock is still uninitialized.
Initialize the lock before registering the IRQ so the interrupt path
always sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: Don't leak return code when parsing firmware format v2
When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally
ignores all security headers. However, the implementation simply breaks
from a switch statement and leaks uninitialized return code `rc' (if the
first section is a security one) or the previous section's `rc'.
Fix it by really skipping a loop with `continue'. For consistency and
readability, also do the same for the default case. |
| In the Linux kernel, the following vulnerability has been resolved:
bootconfig: Fix integer overflow in initrd size check
Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd
with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer
arithmetic:
data = ((void *)hdr) - size;
to wrap around on 32-bit systems (or when pointer subtraction overflows).
Because data wraps around, the subsequent bounds check:
if ((unsigned long)data < initrd_start)
evaluates to false, bypassing the check. The kernel then calls
xbc_calc_checksum(data, size), which attempts to read 4GB of memory,
hitting unmapped pages and triggering a fatal kernel page fault during
early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an
unbounded 32-bit size can similarly bypass the initrd_start check.
Fix this by:
1. Ensuring the initrd is at least large enough to contain the bootconfig
footer and verifying hdr is within the initrd bounds.
2. Checking that size does not exceed XBC_DATA_MAX and does not exceed
the available space between initrd_start and hdr before performing
pointer subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: zero-initialize policy cpumask before sysfs publication
cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(),
i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus
masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate
kmalloc_node() allocation, so its bitmap holds whatever the slab allocator
left behind:
cpufreq_online()
cpufreq_policy_alloc()
alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */
kobject_init_and_add() /* policy%u/ appears in sysfs */
cpufreq_policy_online()
cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */
This leaves a window in which the sysfs attributes are already reachable
while policy->cpus is still garbage. show()/store() gate on
policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero
bitmap makes them run the attribute callbacks on a policy that is not
initialized yet.
Fix this by using zalloc_cpumask_var() for policy->cpus. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: initialize policy rwsem before sysfs publication
cpufreq_policy_alloc() initializes policy->rwsem after
kobject_init_and_add() has created the policy sysfs directory and its
default attributes. A sysfs access can therefore reach a policy callback
before the semaphore has been initialized.
Initialize policy->rwsem before publishing the policy kobject so sysfs
callbacks always see an initialized semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: fix unchecked bound endpoint name length
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: end write accounting from ->ki_complete
Commit b000145e9907 moved both the fsnotify calls and the write
accounting out of the kiocb completion handler and into the
io_req_rw_complete() task_work. However, only the fsnotify part actually
needed to move as it may sleep. Ending the write accounting is just a
percpu_up_read() on the superblock writers sem.
Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE
protection depend on the ring owner getting to running task_work. But
the task may be blocked in freeze_super(), causing it to never get to
that:
task io-wq worker
--------------------------------------------------------------
io_write()
io_kiocb_start_write() (takes sb_writers, hidden from
lockdep by __sb_writers_release)
write_iter() -> -EIOCBQUEUED
ioctl(FS_IOC_SHUTDOWN)
bdev_freeze()
freeze_super()
percpu_down_write() <- waits for the reader above
io_write()
kiocb_start_write()
percpu_down_read() <- queued
behind the
writer
<bio completes>
io_complete_rw()
queues io_req_rw_complete() <- never runs, task is in D state
End the write from io_complete_rw() instead, and leave only the fsnotify
calls in task_work. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Check resize_disabled before publishing the new subbuf order
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use option bits for CFM/MRP frame handlers
CFM and MRP register a global br_frame_type whose hlist_node is linked
into the per-bridge frame_type_list when the first MEP/MRP instance is
created. Enabling the protocol on multiple bridges therefore inserts the
same node into multiple lists. Unregistering it on one bridge then
corrupts list state belonging to another.
These handlers can only be installed once per bridge, and they are
uncommon. Track their per-bridge enable state with net_bridge option
bits, which already live on the Rx hot cache line, and dispatch the
matching handler directly from the receive path. Check both bits
together first as an unlikely case.
Remove the generic frame_type_list and br_frame_type helpers, which
have had no other users since CFM and MRP were added. That shrinks
struct net_bridge by 8 bytes and drops the list walk from the fast
path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and
the compiler prunes the branch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Reserve extra CQ slot for the fence completion CQE
The RX completion queue is sized to hold exactly one CQE per posted RX WQE.
MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after
the packet CQEs. The current sizing reserves no extra slot for it and in
rare cases, CQ has no guaranteed slot for the fence CQE when it is full of
packet CQEs. This can lead to dropping the fence completion while the
driver waits holding RTNL lock throughout the timeout duration.
Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory()
requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE;
the reservation pushes cq_size past a power-of-two, so round up the CQ size
in mana_create_rxq(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mpls: clear inner_protocol when the last label is popped
skb_mpls_push() records the pre-encapsulation network header once, gated
on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it
outlives the encapsulation it describes.
Open vSwitch can then re-push MPLS onto a packet whose
inner_network_header still points at the older, deeper offset: push a
label, pop every label, recirculate (ovs_flow_key_update() re-derives
key->eth.type and resets network_header, but leaves inner_*), then push
again. ovs_fragment() trusts the record:
skb->network_header = skb->inner_network_header;
so skb_network_offset() goes negative. The bound check is signed:
if (skb_network_offset(skb) > MAX_L2_LEN)
a negative offset passes it, and prepare_frag() widens the value:
unsigned int hlen = skb_network_offset(skb);
memcpy(&data->l2_data, skb->data, hlen);
which is a ~4GiB memcpy out of a 30-byte per-CPU buffer.
Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8):
BUG: unable to handle page fault for address: ffffe8ffffc16000
#PF: supervisor write access in kernel mode
Oops: 0002 [#1] SMP KASAN NOPTI
RIP: 0010:memcpy+0x8/0x20
RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000
prepare_frag+0x3df/0x4e0
ovs_fragment+0x589/0x7e0
do_output+0x4ce/0x5e0
do_execute_actions+0x55d2/0x7b30
ovs_execute_actions+0xea/0x450
Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network
header before routing and forwarding"): a stale network header offset
reaching a consumer that widens it. Here it originates in the MPLS
push/pop path.
Clear inner_protocol once the packet is no longer MPLS, so a later push
re-records the current header. net/sched/act_mpls.c is the only other
skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and
restores inner_protocol around fragmentation in the same way OVS does. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: prevent UAF during module unload
nf_ct_set_timeout() protects the timeout hook dereference and policy lookup
with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net
operations before it clears the hook.
This allows the following interleaving:
CPU 0 CPU 1
cttimeout_exit() nf_ct_set_timeout()
unregister_pernet_subsys() rcu_read_lock()
kfree(pernet) h = nf_ct_timeout_hook
h->timeout_find_get()
nfct_timeout_pernet()
The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the
already freed per-net timeout list. KASAN reported:
BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get
Read of size 8 by task poc/90
Call Trace:
ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout]
nf_ct_set_timeout+0x7b/0x3c0
xt_ct_tg_check+0x724/0xb20
xt_check_target+0x234/0xa90
do_ipt_set_ctl+0x570/0x1270
Allocated by task 89:
__kmalloc_noprof+0x16e/0x460
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
Freed by task 91:
kfree+0x131/0x390
ops_undo_list+0x3d4/0x730
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout]
Clear the hook and wait for existing readers before unregistering the
per-net operations. This blocks new policy lookups and ensures readers that
observed the hook finish before the per-net storage is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: unregister loggers before per-net teardown
nf_log_syslog and nfnetlink_log unregister their per-network namespace
operations before unregistering their global logger backends. This
leaves a window where a sysctl or netlink writer can rebind the still-
registered logger after the per-net pre-exit callback cleared the old
selection.
The race looks like this:
CPU 0 CPU 1
---- ----
unregister_pernet_subsys()
nf_log_unset(net, logger)
net->nf.nf_loggers[pf] = NULL
lock nf_log_mutex
find logger in loggers[][]
net->nf.nf_loggers[pf] = logger
unlock nf_log_mutex
nf_log_unregister(logger)
lock nf_log_mutex
loggers[pf][type] = NULL
unlock nf_log_mutex
synchronize_rcu()
module exit returns
module core frees backend memory
Later, a sysctl read or packet logging operation can dereference the
stale per-net logger pointer.
Fix this by unregistering the global logger backends before tearing down
per-net state. Once the global registrations are gone, later writers can
no longer rebind the logger. unregister_pernet_subsys() already waits
for an RCU grace period after the pre-exit callback clears the per-net
selection, while nf_log_unregister() continues to cover readers of the
global logger table.
Apply this ordering fix to both nf_log backends that combine per-net
teardown with global logger registration. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: ifcvf: Put device on unsupported feature error
Route unsupported provisioned features through the common error path after
vdpa_alloc_device() so the allocated device and adapter pointer are
released consistently. |
