| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device.
For more information, see the section of this advisory.
Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. |
| ExaGrid EX10 6.3 - 7.0.1.P08 is vulnerable to Incorrect Access Control. Since version 6.3, ExaGrid enforces restrictions preventing users with the Admin role from creating or modifying users with the Security Officer role without approval. However, a flaw in the account creation process allows an attacker to bypass these restrictions via API request manipulation. An attacker with an Admin access can intercept and modify the API request during user creation, altering the parameters to assign the new account to the ExaGrid Security Officers group without the required approval. |
| A vulnerability was found in CRI-O, where it can be requested to take a checkpoint archive of a container and later be asked to restore it. When it does that restoration, it attempts to restore the mounts from the restore archive instead of the pod request. As a result, the validations run on the pod spec, verifying that the pod has access to the mounts it specifies are not applicable to a restored container. This flaw allows a malicious user to trick CRI-O into restoring a pod that doesn't have access to host mounts. The user needs access to the kubelet or cri-o socket to call the restore endpoint and trigger the restore. |
| Dify is an open-source LLM app development platform. Prior to version 0.6.12, a normal user is able to access and modify APP orchestration, even though the web UI of APP orchestration is not presented for a normal user. This access control flaw allows non-admin users to make unauthorized access and changes on the APPSs. This issue has been patched in version 0.6.12. A workaround for this vulnerability involves updating the the access control mechanisms to enforce stricter user role permissions and implementing role-based access controls (RBAC) to ensure that only users with admin privileges can access Orchestration of the APPs. |
| BeyondTrust Privileged Remote Access (PRA) versions prior to 25.1 are vulnerable to a local authentication bypass. A local authenticated attacker can view the connection details of a ShellJump session that was initiated with external tools, allowing unauthorized access to connected sessions. |
| Improper Authentication vulnerability in Progress MOVEit Transfer (SFTP module) can lead to Privilege Escalation.This issue affects MOVEit Transfer: from 2023.0.0 before 2023.0.12, from 2023.1.0 before 2023.1.7, from 2024.0.0 before 2024.0.3. |
| GoCD is a continuous deliver server. GoCD versions prior to 24.5.0 are vulnerable to admin privilege escalation due to improper authorization of access to the admin "Configuration XML" UI feature, and its associated API. A malicious insider/existing authenticated GoCD user with an existing GoCD user account could abuse this vulnerability to access information intended only for GoCD admins, or to escalate their privileges to that of a GoCD admin in a persistent manner. it is not possible for this vulnerability to be abused prior to authentication/login. The issue is fixed in GoCD 24.5.0. GoCD users who are not able to immediate upgrade can mitigate this issue by using a reverse proxy, WAF or similar to externally block access paths with a `/go/rails/` prefix. Blocking this route causes no loss of functionality. If it is not possible to upgrade or block the above route, consider reducing the GoCD user base to more trusted set of users, including temporarily disabling use of plugins such as the guest-login-plugin, which allow limited anonymous access as a regular user account. |
| GitProxy is an application that stands between developers and a Git remote endpoint. In versions 1.19.1 and below, attackers can exploit the way GitProxy handles new branch creation to bypass the approval of prior commits on the parent branch. The vulnerability impacts all users or organizations relying on GitProxy to enforce policy and prevent unapproved changes. It requires no elevated privileges beyond regular push access, and no extra user interaction. It does however, require a GitProxy administrator or designated user (canUserApproveRejectPush) to approve pushes to the child branch. This is fixed in version 1.19.2. |
| A flaw was found in pam_access, where certain rules in its configuration file are mistakenly treated as hostnames. This vulnerability allows attackers to trick the system by pretending to be a trusted hostname, gaining unauthorized access. This issue poses a risk for systems that rely on this feature to control who can access certain services or terminals. |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.
This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials.
SNMP with IPv6 ACL configurations is not affected.
For more information, see the section of this advisory. |
| In Splunk Enterprise versions below 9.4.1, 9.3.3, 9.2.5, and 9.1.8, and versions below 3.8.38 and 3.7.23 of the Splunk Secure Gateway app on Splunk Cloud Platform, a low-privileged user that does not hold the “admin“ or “power“ Splunk roles could edit and delete other user data in App Key Value Store (KVStore) collections that the Splunk Secure Gateway app created. This is due to missing access control and incorrect ownership of the data in those KVStore collections.<br><br>In the affected versions, the `nobody` user owned the data in the KVStore collections. This meant that there was no specific owner assigned to the data in those collections. |
| Frappe is a full-stack web application framework. Prior to versions 14.89.0 and 15.51.0, making crafted requests could lead to information disclosure that could further lead to account takeover. Versions 14.89.0 and 15.51.0 fix the issue. There's no workaround to fix this without upgrading. |
| A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to modify the behavior of default system policies, such as quality of service (QoS) policies, on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete child policies created under default system policies, which are implicitly used by all tenants in the fabric, resulting in disruption of network traffic. Exploitation is not possible for policies under tenants that an attacker has no authorization to access. |
| A vulnerability in the Trend Micro Apex One Security Agent Plug-in User Interface Manager could allow a local attacker to bypass existing security and execute arbitrary code on affected installations.
This CVE address an addtional bypass not covered in CVE-2024-58104.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.6, macOS Ventura 13.7.7, macOS Sonoma 14.7.7. An app may be able to bypass certain Privacy preferences. |
| This issue was addressed with improved access restrictions. This issue is fixed in macOS Sequoia 15.6, macOS Sonoma 14.7.7, macOS Ventura 13.7.7. A malicious app acting as a HTTPS proxy could get access to sensitive user data. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.6, macOS Ventura 13.7.7, macOS Sonoma 14.7.7. An app may be able to read files outside of its sandbox. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to version 1.14.0-alpha.1, Kyverno ignores subjectRegExp and IssuerRegExp while verifying artifact's sign with keyless mode. It allows the attacker to deploy kubernetes resources with the artifacts that were signed by unexpected certificate. Deploying these unauthorized kubernetes resources can lead to full compromise of kubernetes cluster. Version 1.14.0-alpha.1 contains a patch for the issue. |
| The WooCommerce - Social Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.7.7. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| A vulnerability has been found in SourceCodester Food Menu Manager 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file endpoint/update.php. The manipulation leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
