| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. |
| A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states. |
| A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default. |
| A vulnerability in how Cisco Firepower Threat Defense (FTD) Software handles session timeouts for management connections could allow an unauthenticated, remote attacker to cause a buildup of remote management connections to an affected device, which could result in a denial of service (DoS) condition. The vulnerability exists because the default session timeout period for specific to-the-box remote management connections is too long. An attacker could exploit this vulnerability by sending a large and sustained number of crafted remote management connections to an affected device, resulting in a buildup of those connections over time. A successful exploit could allow the attacker to cause the remote management interface or Cisco Firepower Device Manager (FDM) to stop responding and cause other management functions to go offline, resulting in a DoS condition. The user traffic that is flowing through the device would not be affected, and the DoS condition would be isolated to remote management only. |
| A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied. |
| A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory handling error when GRE over IPv6 traffic is processed. An attacker could exploit this vulnerability by sending crafted GRE over IPv6 packets with either IPv4 or IPv6 payload through an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS. |
| A vulnerability in the Deterministic Random Bit Generator (DRBG), also known as Pseudorandom Number Generator (PRNG), used in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. The vulnerability is due to insufficient entropy in the DRBG when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device. |
| Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device. The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry. |
| A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software. |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting commands into arguments for a specific command. A successful exploit could allow the attacker to execute commands with root privileges. |
| A vulnerability in the logging subsystem of the Cisco Firepower Threat Defense (FTD) Firepower Device Manager (FDM) could allow an unauthenticated, remote attacker to add arbitrary entries to the audit log. This vulnerability affects Cisco Firepower Threat Defense Software versions 6.1.x on the following vulnerable products that have enabled FDM: ASA5506-X ASA5506W-X ASA5506H-X ASA5508-X ASA5516-X ASA5512-X ASA5515-X ASA5525-X ASA5545-X ASA5555-X. More Information: CSCvb86860. Known Affected Releases: FRANGELICO. Known Fixed Releases: 6.2.0. |
| A "Cisco Firepower Threat Defense 6.0.0 through 6.2.2 and Cisco ASA with FirePOWER Module Denial of Service" vulnerability in the access control policy of Cisco Firepower System Software could allow an authenticated, remote attacker to cause an affected system to stop inspecting and processing packets, resulting in a denial of service (DoS) condition. The vulnerability is due to improper SSL policy handling by the affected software when packets are passed through the sensing interfaces of an affected system. An attacker could exploit this vulnerability by sending crafted packets through a targeted system. This vulnerability affects Cisco Firepower System Software that is configured with the SSL policy feature. Cisco Bug IDs: CSCvc84361. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass file policies that are configured to block files transmitted to an affected device via the BitTorrent protocol. The vulnerability exists because the affected software does not detect BitTorrent handshake messages correctly. An attacker could exploit this vulnerability by sending a crafted BitTorrent connection request to an affected device. A successful exploit could allow the attacker to bypass file policies that are configured to block files transmitted to the affected device via the BitTorrent protocol. Cisco Bug IDs: CSCve26946. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
