| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because
rxcb->peer_id is not updated with a valid value. This is expected
in monitor mode, where RX frames bypass the regular RX
descriptor path that typically sets rxcb->peer_id.
As a result, the peer is NULL, and link_id and link_valid fields
in the RX status are not populated. This leads to a WARN_ON in
mac80211 when it receives data frame from an associated station
with invalid link_id.
Fix this potential issue by using ppduinfo->peer_id, which holds
the correct peer id for the received frame. This ensures that the
peer is correctly found and the associated link metadata is updated
accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: m2m: Fix streaming cleanup on release
If streamon/streamoff calls are imbalanced, such as when exiting an
application with Ctrl+C when streaming, the m2m usage_count will never
reach zero and the ISI channel won't be freed. Besides from that, if the
input line width is more than 2K, it will trigger a WARN_ON():
[ 59.222120] ------------[ cut here ]------------
[ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654
[ 59.238569] Modules linked in: ap1302
[ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty #258 PREEMPT
[ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT)
[ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120
[ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120
[ 59.275047] sp : ffff8000848c3b40
[ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00
[ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001
[ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780
[ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000
[ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c
[ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30
[ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420
[ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000
[ 59.349590] Call trace:
[ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P)
[ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c
[ 59.361072] v4l_streamon+0x24/0x30
[ 59.364556] __video_do_ioctl+0x40c/0x4a0
[ 59.368560] video_usercopy+0x2bc/0x690
[ 59.372382] video_ioctl2+0x18/0x24
[ 59.375857] v4l2_ioctl+0x40/0x60
[ 59.379168] __arm64_sys_ioctl+0xac/0x104
[ 59.383172] invoke_syscall+0x48/0x104
[ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0
[ 59.391613] do_el0_svc+0x1c/0x28
[ 59.394915] el0_svc+0x34/0xf4
[ 59.397966] el0t_64_sync_handler+0xa0/0xe4
[ 59.402143] el0t_64_sync+0x198/0x19c
[ 59.405801] ---[ end trace 0000000000000000 ]---
Address this issue by moving the streaming preparation and cleanup to
the vb2 .prepare_streaming() and .unprepare_streaming() operations. This
also simplifies the driver by allowing direct usage of the
v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb);
}
rtl8150_set_multicast() {
netif_stop_queue();
netif_wake_queue(); <-- wakes up TX queue before URB is done
}
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb); <-- double submission
}
rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.
The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
| Improper Authentication vulnerability in TYPO3 Extension "Modules" codingms/modules.This issue affects Extension "Modules": before 4.3.11, from 5.0.0 before 5.7.4, from 6.0.0 before 6.4.2, from 7.0.0 before 7.5.5. |
| Bacteriology Laboratory Reporting System developed by ViewLead Technology has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: bytcr_rt5640: Fix invalid quirk input mapping
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.
This patch corrects the input mapping to the certain default value if
an invalid value is passed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: debugfs: Fix legacy mode page table dump logic
In legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTR
maybe uninitialized or zero in that case and may cause oops like:
Oops: general protection fault, probably for non-canonical address
0xf00087d3f000f000: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
RIP: 0010:pgtable_walk_level+0x98/0x150
RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206
RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e
RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000
RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002
R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000
R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98
FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
pgtable_walk_level+0x88/0x150
domain_translation_struct_show.isra.0+0x2d9/0x300
dev_domain_translation_struct_show+0x20/0x40
seq_read_iter+0x12d/0x490
...
Avoid walking the page table if TT is not 00b or 01b. |
| The MembershipWorks – Membership, Events & Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 6.14 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| Bacteriology Laboratory Reporting System developed by ViewLead Technology has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read database contents. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
The driver incorrectly determines SGI vs SPI interrupts by checking IRQ
number < 16, which fails with dynamic IRQ allocation. During unbind,
this causes improper SGI cleanup leading to kernel crash.
Add explicit irq_type field to pdata for reliable identification of SGI
interrupts (type-2) and only clean up SGI resources when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - request reserved interrupt for virtual function
The device interrupt vector 3 is an error interrupt for
physical function and a reserved interrupt for virtual function.
However, the driver has not registered the reserved interrupt for
virtual function. When allocating interrupts, the number of interrupts
is allocated based on powers of two, which includes this interrupt.
When the system enables GICv4 and the virtual function passthrough
to the virtual machine, releasing the interrupt in the driver
triggers a warning.
The WARNING report is:
WARNING: CPU: 62 PID: 14889 at arch/arm64/kvm/vgic/vgic-its.c:852 its_free_ite+0x94/0xb4
Therefore, register a reserved interrupt for VF and set the
IRQF_NO_AUTOEN flag to avoid that warning. |
| The Easy Email Subscription plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'name' parameter in all versions up to, and including, 1.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to truncate first page in error path of f2fs_truncate()
syzbot reports a bug as below:
loop0: detected capacity change from 0 to 40427
F2FS-fs (loop0): Wrong SSA boundary, start(3584) end(4096) blocks(3072)
F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): f2fs_convert_inline_folio: corrupted inline inode ino=3, i_addr[0]:0x1601, run fsck to fix.
------------[ cut here ]------------
kernel BUG at fs/inode.c:753!
RIP: 0010:clear_inode+0x169/0x190 fs/inode.c:753
Call Trace:
<TASK>
evict+0x504/0x9c0 fs/inode.c:810
f2fs_fill_super+0x5612/0x6fa0 fs/f2fs/super.c:5047
get_tree_bdev_flags+0x40e/0x4d0 fs/super.c:1692
vfs_get_tree+0x8f/0x2b0 fs/super.c:1815
do_new_mount+0x2a2/0x9e0 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x317/0x410 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
During f2fs_evict_inode(), clear_inode() detects that we missed to truncate
all page cache before destorying inode, that is because in below path, we
will create page #0 in cache, but missed to drop it in error path, let's fix
it.
- evict
- f2fs_evict_inode
- f2fs_truncate
- f2fs_convert_inline_inode
- f2fs_grab_cache_folio
: create page #0 in cache
- f2fs_convert_inline_folio
: sanity check failed, return -EFSCORRUPTED
- clear_inode detects that inode->i_data.nrpages is not zero |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations and a broken epilogue in the exception handlers. This will
prevent crashes and ensure correct return values of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. |
| The a+HRD and a+HCM developed by aEnrich has a Stored Cross-Site Scripting vulnerability, allowing authenticated remote attackers to upload files containing malicious JavaScript code, which will execute on the client side when a user is tricked into visiting a specific URL. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
Stephen noted that it is possible to not have an smp_mb() between
the loaded_mm store and the tlb_gen load in switch_mm(), meaning the
ordering against flush_tlb_mm_range() goes out the window, and it
becomes possible for switch_mm() to not observe a recent tlb_gen
update and fail to flush the TLBs.
[ dhansen: merge conflict fixed by Ingo ] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: Fix double cleanup on devm_add_action_or_reset() failure
When devm_add_action_or_reset() fails, it calls the passed cleanup
function. Hence the caller must not repeat that cleanup.
Replace the "goto err_regulator_free" by the actual freeing, as there
will never be a need again for a second user of this label. |
