Filtered by vendor Cisco
Subscriptions
Filtered by product Ios
Subscriptions
Total
595 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-6737 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 8.8 High |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60402. | ||||
| CVE-2017-6627 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 7.5 High |
| A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506. | ||||
| CVE-2017-6665 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 6.5 Medium |
| A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to reset the Autonomic Control Plane (ACP) of an affected system and view ACP packets that are transferred in clear text within an affected system, an Information Disclosure Vulnerability. More Information: CSCvd51214. Known Affected Releases: Denali-16.2.1 Denali-16.3.1. | ||||
| CVE-2017-6624 | 1 Cisco | 1 Ios | 2024-08-05 | N/A |
| A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939. | ||||
| CVE-2017-6663 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 6.5 Medium |
| A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause autonomic nodes of an affected system to reload, resulting in a denial of service (DoS) condition. More Information: CSCvd88936. Known Affected Releases: Denali-16.2.1 Denali-16.3.1. | ||||
| CVE-2017-3863 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727. | ||||
| CVE-2017-3849 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717. | ||||
| CVE-2017-3857 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 7.5 High |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. | ||||
| CVE-2017-3881 | 1 Cisco | 323 Catalyst 2350-48td-s, Catalyst 2350-48td-sd, Catalyst 2360-48td-s and 320 more | 2024-08-05 | 9.8 Critical |
| A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893. | ||||
| CVE-2017-3861 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751. | ||||
| CVE-2017-3850 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729. | ||||
| CVE-2017-3862 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493. | ||||
| CVE-2017-3860 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | N/A |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331. | ||||
| CVE-2017-3864 | 1 Cisco | 2 Ios, Ios Xe | 2024-08-05 | 8.6 High |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. | ||||
| CVE-2017-3803 | 1 Cisco | 1 Ios | 2024-08-05 | N/A |
| A vulnerability in the Cisco IOS Software forwarding queue of Cisco 2960X and 3750X switches could allow an unauthenticated, adjacent attacker to cause a memory leak in the software forwarding queue that would eventually lead to a partial denial of service (DoS) condition. More Information: CSCva72252. Known Affected Releases: 15.2(2)E3 15.2(4)E1. Known Fixed Releases: 15.2(2)E6 15.2(4)E3 15.2(5)E1 15.2(5.3.28i)E1 15.2(6.0.49i)E 3.9(1)E. | ||||
| CVE-2018-0255 | 1 Cisco | 1 Ios | 2024-08-05 | N/A |
| A vulnerability in the device manager web interface of Cisco Industrial Ethernet Switches could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of an affected system. The vulnerability is due to insufficient CSRF protection by the device manager web interface. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link or visit an attacker-controlled website. A successful exploit could allow the attacker to submit arbitrary requests to an affected device via the device manager web interface with the privileges of the user. This vulnerability affects the following Cisco Industrial Ethernet (IE) Switches if they are running a vulnerable release of Cisco IOS Software: IE 2000 Series, IE 2000U Series, IE 3000 Series, IE 3010 Series, IE 4000 Series, IE 4010 Series, IE 5000 Series. Cisco Bug IDs: CSCvc96405. | ||||
| CVE-2018-0180 | 1 Cisco | 299 1000 Integrated Services Router, 1100-4g\/6g Integrated Services Router, 1100-4g Integrated Services Router and 296 more | 2024-08-05 | 5.9 Medium |
| Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599. | ||||
| CVE-2018-0158 | 2 Cisco, Rockwellautomation | 12 Asr 1001-hx, Asr 1001-x, Asr 1002-hx and 9 more | 2024-08-05 | 8.6 High |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf22394. | ||||
| CVE-2018-0175 | 2 Cisco, Rockwellautomation | 10 Ios, Ios Xe, Ios Xr and 7 more | 2024-08-05 | 8.0 High |
| Format String vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCvd73664. | ||||
| CVE-2018-0163 | 2 Cisco, Rockwellautomation | 96 1120 Connected Grid Router, 1240 Connected Grid Router, 1905 Serial Integrated Services Router and 93 more | 2024-08-05 | 6.5 Medium |
| A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls and obtain access to the network. Cisco Bug IDs: CSCvg69701. | ||||