| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Microsoft is aware of vulnerabilities in the third party Agere Modem driver that ships natively with supported Windows operating systems. This is an announcement of the upcoming removal of ltmdm64.sys driver. The driver has been removed in the October cumulative update.
Fax modem hardware dependent on this specific driver will no longer work on Windows.
Microsoft recommends removing any existing dependencies on this hardware. |
| Microsoft is aware of vulnerabilities in the third party Agere Modem driver that ships natively with supported Windows operating systems. This is an announcement of the upcoming removal of ltmdm64.sys driver. The driver has been removed in the October cumulative update.
Fax modem hardware dependent on this specific driver will no longer work on Windows.
Microsoft recommends removing any existing dependencies on this hardware. |
| Inconsistent interpretation of http requests ('http request/response smuggling') in ASP.NET Core allows an authorized attacker to bypass a security feature over a network. |
| Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally. |
| Incorrect implementation of authentication algorithm in Microsoft Exchange Server allows an unauthorized attacker to elevate privileges locally. |
| Use after free in Windows Device Association Broker service allows an authorized attacker to elevate privileges locally. |
| Use after free in Microsoft Brokering File System allows an unauthorized attacker to elevate privileges locally. |
| Improper access control in Azure Connected Machine Agent allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
If share is , share->path is NULL and it cause NULL pointer
dereference issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix multipath crash caused by flush request when blktrace is enabled
The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:
[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294] <TASK>
[ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830] tcp_read_sock+0x9c/0x260
[ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834] process_one_work+0x1e8/0x390
[ 2517.954473] worker_thread+0x53/0x3c0
[ 2517.958069] ? process_one_work+0x390/0x390
[ 2517.961655] kthread+0x10c/0x130
[ 2517.965211] ? set_kthread_struct+0x40/0x40
[ 2517.968760] ret_from_fork+0x1f/0x30
[ 2517.972285] </TASK>
To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: Rework scratch handling for READ_PLUS (again)
I found that the read code might send multiple requests using the same
nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is
how we ended up occasionally double-freeing the scratch buffer, but also
means we set a NULL pointer but non-zero length to the xdr scratch
buffer. This results in an oops the first time decoding needs to copy
something to scratch, which frequently happens when decoding READ_PLUS
hole segments.
I fix this by moving scratch handling into the pageio read code. I
provide a function to allocate scratch space for decoding read replies,
and free the scratch buffer when the nfs_pgio_header is freed. |
| SSH servers parsing GSSAPI authentication requests do not validate the number of mechanisms specified in the request, allowing an attacker to cause unbounded memory consumption. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: da9063: better fix null deref with partial DT
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: Fix handling of real but unexpected device interrupts
Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI
IDs") caused a regression on certain Gigabyte motherboards for Intel
Alder Lake-S where system crashes to NULL pointer dereference in
i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep").
I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made
following notes:
- Issue happens when resuming from S3 but not when resuming from
"s2idle"
- PCI device 00:15.0 == i2c_designware.0 is already in D0 state when
system enters into pci_pm_resume_noirq() while all other i2c_designware
PCI devices are in D3. Devices were runtime suspended and in D3 prior
entering into suspend
- Interrupt comes after pci_pm_resume_noirq() when device interrupts are
re-enabled
- According to register dump the interrupt really comes from the
i2c_designware.0. Controller is enabled, I2C target address register
points to a one detectable I2C device address 0x60 and the
DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and
TX_EMPTY bits are set indicating completed I2C transaction.
My guess is that the firmware uses this controller to communicate with
an on-board I2C device during resume but does not disable the controller
before giving control to an operating system.
I was told the UEFI update fixes this but never the less it revealed the
driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device
is supposed to be idle and state variables are not set (especially the
dev->msgs pointer which may point to NULL or stale old data).
Introduce a new software status flag STATUS_ACTIVE indicating when the
controller is active in driver point of view. Now treat all interrupts
that occur when is not set as unexpected and mask all interrupts from
the controller. |
| Adobe Experience Manager versions 6.5.23 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| Adobe Experience Manager versions 6.5.23 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| Improper Symbolic link handling in the PutContents API in Gogs allows Local Execution of Code. |
| In JetBrains YouTrack before 2025.3.104432 a race condition allowed bypass of helpdesk Agent limit |
| Cross-Site Request Forgery (CSRF) vulnerability in SaifuMak Add Custom Codes add-custom-codes allows Cross Site Request Forgery.This issue affects Add Custom Codes: from n/a through <= 4.80. |
| OS Command Injection vulnerability in Ruijie RG-S1930 S1930SWITCH_3.0(1)B11P230 allowing attackers to execute arbitrary commands via a crafted POST request to the module_update in file /usr/local/lua/dev_config/ace_sw.lua. |
