Filtered by vendor Cisco
Subscriptions
Total
6213 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2018-0243 | 1 Cisco | 1 Firepower Threat Defense | 2024-08-05 | N/A |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a configured file action policy that is intended to drop the Server Message Block Version 2 (SMB2) and SMB Version 3 (SMB3) protocols if malware is detected. The vulnerability is due to incorrect detection of an SMB2 or SMB3 file based on the total file length. An attacker could exploit this vulnerability by sending a crafted SMB2 or SMB3 transfer request through the targeted device. An exploit could allow the attacker to pass SMB2 or SMB3 files that could be malware even though the device is configured to block them. This vulnerability does not exist for SMB Version 1 (SMB1) files. This vulnerability affects Cisco Firepower System Software when one or more file action policies are configured, on software releases prior to 6.2.3. Cisco Bug IDs: CSCvg68807. | ||||
| CVE-2018-0219 | 1 Cisco | 1 Unified Computing System Director | 2024-08-05 | N/A |
| A vulnerability in the web-based management interface of Cisco Unified Computing System (UCS) Director could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvg86518. | ||||
| CVE-2018-0254 | 1 Cisco | 31 Amp 7150, Amp 8150, Firepower Appliance 7010 and 28 more | 2024-08-05 | N/A |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass configured file action policies if an Intelligent Application Bypass (IAB) with a drop percentage threshold is also configured. The vulnerability is due to incorrect counting of the percentage of dropped traffic. An attacker could exploit this vulnerability by sending network traffic to a targeted device. An exploit could allow the attacker to bypass configured file action policies, and traffic that should be dropped could be allowed into the network. Cisco Bug IDs: CSCvf86435. | ||||
| CVE-2018-0256 | 1 Cisco | 1 Asr 5000 Series Software | 2024-08-05 | N/A |
| A vulnerability in the peer-to-peer message processing functionality of Cisco Packet Data Network Gateway could allow an unauthenticated, remote attacker to cause the Session Manager (SESSMGR) process on an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect validation of peer-to-peer packet headers. An attacker could exploit this vulnerability by sending a crafted peer-to-peer packet through an affected device. A successful exploit could allow the attacker to cause the SESSMGR process on the affected device to restart unexpectedly, which could briefly impact traffic while the SESSMGR process restarts and result in a DoS condition. Cisco Bug IDs: CSCvg88786. | ||||
| CVE-2018-0234 | 1 Cisco | 1 Aironet Access Point Software | 2024-08-05 | N/A |
| A vulnerability in the implementation of Point-to-Point Tunneling Protocol (PPTP) functionality in Cisco Aironet 1810, 1830, and 1850 Series Access Points could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected access point. An attacker could exploit this vulnerability by initiating a PPTP connection to an affected access point from a device that is registered to the same wireless network as the access point and sending a malicious GRE frame through the data plane of the access point. A successful exploit could allow the attacker to cause the NSS core process on the affected access point to crash, which would cause the access point to reload and result in a DoS condition. This vulnerability affects Cisco Aironet 1810, 1830, and 1850 Series Access Points that are running Cisco Mobility Express Software Release 8.4.100.0, 8.5.103.0, or 8.5.105.0 and are configured as a master, subordinate, or standalone access point. Cisco Bug IDs: CSCvf73890. | ||||
| CVE-2018-0233 | 1 Cisco | 1 Firepower Management Center | 2024-08-05 | N/A |
| A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031. | ||||
| CVE-2018-0224 | 1 Cisco | 4 Asr 5000, Asr 5500, Asr 5700 and 1 more | 2024-08-05 | 6.7 Medium |
| A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected operating system. The vulnerability is due to insufficient validation of user-supplied input by the affected operating system. An attacker could exploit this vulnerability by authenticating to an affected system and injecting malicious arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. Cisco Bug IDs: CSCvg38807. | ||||
| CVE-2018-0247 | 1 Cisco | 2 Aironet Access Point Software, Wireless Lan Controller Software | 2024-08-05 | N/A |
| A vulnerability in Web Authentication (WebAuth) clients for the Cisco Wireless LAN Controller (WLC) and Aironet Access Points running Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic. The vulnerability is due to incorrect implementation of authentication for WebAuth clients in a specific configuration. An attacker could exploit this vulnerability by sending traffic to local network resources without having gone through authentication. A successful exploit could allow the attacker to bypass authentication and pass traffic. This affects Cisco Aironet Access Points running Cisco IOS Software and Cisco Wireless LAN Controller (WLC) releases prior to 8.5.110.0 for the following specific WLC configuration only: (1) The Access Point (AP) is configured in FlexConnect Mode with NAT. (2) The WLAN is configured for central switching, meaning the client is being assigned a unique IP address. (3) The AP is configured with a Split Tunnel access control list (ACL) for access to local network resources, meaning the AP is doing the NAT on the connection. (4) The client is using WebAuth. This vulnerability does not apply to .1x clients in the same configuration. Cisco Bug IDs: CSCvc79502, CSCvf71789. | ||||
| CVE-2018-0250 | 1 Cisco | 1 Aironet Access Point Software | 2024-08-05 | N/A |
| A vulnerability in Central Web Authentication (CWA) with FlexConnect Access Points (APs) for Cisco Aironet 1560, 1810, 1810w, 1815, 1830, 1850, 2800, and 3800 Series APs could allow an authenticated, adjacent attacker to bypass a configured FlexConnect access control list (ACL). The vulnerability is due to the AP ignoring the ACL download from the client during authentication. An attacker could exploit this vulnerability by connecting to the targeted device with a vulnerable configuration. A successful exploit could allow the attacker to bypass a configured client FlexConnect ACL. This vulnerability affects the following Cisco products if they are running a vulnerable release of Central Web Authentication with FlexConnect Access Points Software: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Note: Central Web Authentication with FlexConnect Access Points was an unsupported configuration until 8.5.100.0. Cisco Bug IDs: CSCve17756. | ||||
| CVE-2018-0238 | 1 Cisco | 1 Unified Computing System Director | 2024-08-05 | N/A |
| A vulnerability in the role-based resource checking functionality of the Cisco Unified Computing System (UCS) Director could allow an authenticated, remote attacker to view unauthorized information for any virtual machine in the UCS Director end-user portal and perform any permitted operations on any virtual machine. The permitted operations can be configured for the end user on the virtual machines with either of the following settings: The virtual machine is associated to a Virtual Data Center (VDC) that has an end user self-service policy attached to the VDC. The end user role has VM Management Actions settings configured under User Permissions. This is a global configuration, so all the virtual machines visible in the end-user portal will have the VM management actions available. The vulnerability is due to improper user authentication checks. An attacker could exploit this vulnerability by logging in to the UCS Director with a modified username and valid password. A successful exploit could allow the attacker to gain visibility into and perform actions against all virtual machines in the UCS Director end-user portal of the affected system. This vulnerability affects Cisco Unified Computing System (UCS) Director releases 6.0 and 6.5 prior to patch 3 that are in a default configuration. Cisco Bug IDs: CSCvh53501. | ||||
| CVE-2018-0230 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-08-05 | N/A |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. | ||||
| CVE-2018-0221 | 1 Cisco | 1 Identity Services Engine | 2024-08-05 | N/A |
| A vulnerability in specific CLI commands for the Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection to the underlying operating system or cause a hang or disconnect of the user session. The attacker needs valid administrator credentials for the device. The vulnerability is due to incomplete input validation of user input for certain CLI ISE configuration commands. An attacker could exploit this vulnerability by authenticating as an administrative user, issuing a specific CLI command, and entering crafted, malicious user input for the command parameters. An exploit could allow the attacker to perform command injection to the lower-level Linux operating system. It is also possible the attacker could cause the ISE user interface for this management session to hang or disconnect. Cisco Bug IDs: CSCvg95479. | ||||
| CVE-2018-0229 | 1 Cisco | 2 Adaptive Security Appliance Software, Anyconnect Secure Mobility Client | 2024-08-05 | N/A |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. | ||||
| CVE-2018-0222 | 1 Cisco | 1 Digital Network Architecture Center | 2024-08-05 | N/A |
| A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to log in to an affected system by using an administrative account that has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the default administrative account for the affected software. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands with root privileges. This vulnerability affects all releases of Cisco DNA Center Software prior to Release 1.1.3. Cisco Bug IDs: CSCvh98929. | ||||
| CVE-2018-0223 | 1 Cisco | 1 Security Manager | 2024-08-05 | N/A |
| A vulnerability in DesktopServlet in the web-based management interface of Cisco Security Manager could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based interface. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCuy79668. | ||||
| CVE-2018-0226 | 1 Cisco | 1 Mobility Express Software | 2024-08-05 | N/A |
| A vulnerability in the assignment and management of default user accounts for Secure Shell (SSH) access to Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running Cisco Mobility Express Software could allow an authenticated, remote attacker to gain elevated privileges on an affected access point. The vulnerability exists because the Cisco Mobility Express controller of the affected software configures the default SSH user account for an access point to be the first SSH user account that was created for the Mobility Express controller, if an administrator added user accounts directly to the controller instead of using the default configuration or the SSH username creation wizard. Although the user account has read-only privileges for the Mobility Express controller, the account could have administrative privileges for an associated access point. An attacker who has valid user credentials for an affected controller could exploit this vulnerability by using the default SSH user account to authenticate to an affected access point via SSH. A successful exploit could allow the attacker to log in to the affected access point with administrative privileges and perform arbitrary administrative actions. This vulnerability affects the following Cisco products: Aironet 1800 Series Access Points that are running Cisco Mobility Express Software Releases 8.2.121.0 through 8.5.105.0, Aironet 2800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0, Aironet 3800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0. Cisco Bug IDs: CSCva68116. | ||||
| CVE-2018-0227 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-08-05 | 7.5 High |
| A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. | ||||
| CVE-2018-0239 | 1 Cisco | 2 Asr 5700, Staros | 2024-08-05 | 7.5 High |
| A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385. | ||||
| CVE-2018-0231 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-08-05 | N/A |
| A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446. | ||||
| CVE-2018-0241 | 1 Cisco | 9 Asr 9001, Asr 9006, Asr 9010 and 6 more | 2024-08-05 | N/A |
| A vulnerability in the UDP broadcast forwarding function of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of UDP broadcast packets that are forwarded to an IPv4 helper address. An attacker could exploit this vulnerability by sending multiple UDP broadcast packets to the affected device. An exploit could allow the attacker to cause a buffer leak on the affected device, eventually resulting in a DoS condition requiring manual intervention to recover. This vulnerability affects all Cisco IOS XR platforms running 6.3.1, 6.2.3, or earlier releases of Cisco IOS XR Software when at least one IPv4 helper address is configured on an interface of the device. Cisco Bug IDs: CSCvi35625. | ||||