| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Due to an improperly configured firewall rule, the router will accept any connection on the WAN port with the source port 5222, exposing all services which are normally only accessible through the local network.
This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| A directory traversal vulnerability exists in Linksys router's web interface (tested on the E1500 model firmware versions 1.0.00, 1.0.04, and 1.0.05), specifically in the /apply.cgi endpoint. Authenticated attackers can exploit the next_page POST parameter to access arbitrary files outside the intended web root by injecting traversal sequences. This allows exposure of sensitive system files and configuration data. |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. |
| A flaw has been found in Linksys MR9600 2.0.6.206937. Affected is the function smartConnectConfigure of the file SmartConnect.lua. Executing a manipulation of the argument configApSsid/configApPassphrase/srpLogin/srpPassword can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Linksys MR9600, Linksys MX4200 allows that contents of a USB drive partition can be mounted in an arbitrary location of the file system. This may result in the execution of shell scripts in the context of a root user.This issue affects MR9600: 1.0.4.205530; MX4200: 1.0.13.210200. |
| Linksys E5600 V1.1.0.26 is vulnerable to command injection in the runtime.macClone function via the mc.ip parameter. |
| linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus. |
| In Linksys E2500 3.0.04.002, the chroot_local_user option is enabled in the vsftpd configuration file. This could lead to unauthorized access to system files, privilege escalation, or use of the compromised server as a pivot point for internal network attacks. |
| A vulnerability was discovered in Linksys Router E2500 with firmware 2.0.00, allows authenticated attackers to execute arbitrary code via the hnd_parentalctrl_unblock function. |
| A stored cross-site scripting (XSS) vulnerability in the page_save component of Linksys E5600 V1.1.0.26 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the hostname and domainName parameters. |
| Successful exploitation of the vulnerability could allow an attacker with local network access to send a specially crafted URL to access certain administration functions without login credentials. |
| A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A stack-based buffer overflow vulnerability exists in the makeRequest.cgi binary of Linksys RE7000 routers (Firmware FW_v2.0.15_211230_1012). The arplookup function parses lines from /proc/net/arp using sscanf("%16s ... %18s ..."), storing results into buffers v6 (12 bytes) and v7 (20 bytes). Since the format specifiers allow up to 16 and 18 bytes respectively, oversized input can overflow the buffers, resulting in stack corruption. Local attackers controlling /proc/net/arp contents can exploit this issue to cause denial of service or potentially execute arbitrary code. |
| An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication. |
| A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. |
| A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution. |
