| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in JBoss marshalling. The Infinispan session replication path deserializes replicated session data via the JBoss Marshalling River unmarshaller with no class filtering — enabling RCE via deserialization gadget chains on every cluster node. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| IBM Concert 1.0.0 through 3.0.0 allows recursive copying of directories without proper controls which can lead to unintentional inclusion of sensitive or unnecessary files and increased attack surface. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| Plaintext exposure of sensitive authentication data in Brocade SANnav discovery service log files enables individuals with file read access to retrieve administrative switch credentials and active session tokens. An attacker with access to system logs or support bundles can leverage exposed authentication details to compromise managed network infrastructure and access active application sessions. This vulnerability affects Brocade SANnav versions before 3.0.1a. |
| Improper handling of sensitive data during IPsec policy creation and modification in Brocade SANnav versions before 3.0.1a results in pre-shared keys being recorded in application logs. Individuals with read access to system log files or support bundles can view these credentials, leading to the potential exposure of keys used to secure network tunnels. |
| An information exposure vulnerability in the job scheduling component of SANnav allows sensitive credentials to be written to application logs in plain text. When scheduled support save jobs or related operational tasks are executed, sensitive parameters including external server passwords and archive protection keys are logged without proper masking. A local or authenticated user with access to application logs or support bundles can view these cleartext credentials, potentially leading to unauthorized access to remote backup targets or protected archives. |
| copyparty contains a volume restriction bypass vulnerability in its SFTP front end that allows authenticated SFTP users to create, remove, and truncate arbitrary paths outside permitted volume boundaries by exploiting three handlers that bypass the xvol volflag enforcement. The _mkdir, _rmdir, and _chattr handlers construct destination paths using vfs.get(), vn.canonical(), and os.path.join() without invoking the chk_ap access check, enabling attackers to traverse symlinks leaving a volume's top directory and perform unauthorized file creation, deletion, or truncation via SSH_FXP_SETSTAT operations on paths outside any volume the account is authorized to access. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary code due to unsafe deserialization of untrusted data. |
| BentoPDF is a client-side PDF toolkit that is self hostable. In 2.8.6 and earlier, deserializeWorkflow() accepts the Timestamp node's tsaUrl control from imported JSON without schema or destination validation. When a user imports the crafted workflow and runs it against a PDF, timestampPdf() sends an RFC 3161 TimeStampReq containing the PDF's SHA-256 MessageImprint to the attacker-selected endpoint. The default self-hosted configuration does not set VITE_CORS_PROXY_URL, so the request bypasses the proxy's ALLOWED_TSA_HOSTS checks and is sent directly. The disclosed digest can confirm that a document matches a known file and can correlate the same document across users without revealing its contents. This vulnerability is fixed in 2.8.7. |
| A flaw was found in Buildah (and subsequently Podman Build) which allows containers to mount arbitrary locations on the host filesystem into build containers. A malicious Containerfile can use a dummy image with a symbolic link to the root filesystem as a mount source and cause the mount operation to mount the host root filesystem inside the RUN step. The commands inside the RUN step will then have read-write access to the host filesystem, allowing for full container escape at build time. |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 unauthenticated remote code execution was possible via the agent polling protocol |
| A vulnerability allowing remote code execution (RCE) on the Backup Server by an authenticated domain user. |
| Deserialization of untrusted data in the command monitoring support of the MongoDB PHP Driver can cause class names embedded in document content to be honored when the driver builds monitoring event objects. When an application registers a command monitoring subscriber and includes untrusted data in a database operation, an unauthenticated party who controls that data may cause an application class implementing the driver's persistable interface to be instantiated and its unserialization method invoked with the supplied data. The resulting impact depends on the classes available in the application. |
| Obsidian Web MCP is a secure remote MCP server for Obsidian vaults. Prior to 0.2.0, /oauth/authorize issues an authorization code without a login, consent, or session check, and /oauth/token can exchange that code for the static VAULT_MCP_TOKEN without authenticating a client. An unauthenticated remote caller who can reach the intended tunnel deployment can therefore call /mcp and use vault_read, vault_write, vault_search, vault_list, vault_move, and vault_delete against the entire vault. Optional PKCE does not prevent an attacker-initiated flow, and unauthenticated /oauth/register also exposes a client_credentials path by returning the configured VAULT_OAUTH_CLIENT_SECRET. This issue is fixed in version 0.2.0. |
| authentik is an open-source identity provider. Prior to 2026.2.7, 2026.5.7, and 2026.8.2, authentik API serializers return stored credentials when an account has view permission on an affected configuration, even when that account is not authorized to change the configuration or read its secrets. Affected configurations include one-time code delivery by mail or SMS, outbound provisioning targets, device trust integrations, identity sources, the Kubernetes outpost integration, applications using a client or shared secret, and applications using a proxy provider. Deployments are affected when view permission is granted to accounts that are not intended to read these credentials; deployments where every viewer is permitted to read them are not affected. This issue is fixed in versions 2026.2.7, 2026.5.7, and 2026.8.2. |
| Deserialization of Untrusted Data and Allocation of Resources Without Limits or Throttling vulnerabilities in elixir-grpc grpc allow unauthenticated attackers to crash the BEAM node via atom table exhaustion and, when a decoded term flows into a call site that invokes it, achieve remote code execution on the server.
'Elixir.GRPC.Codec.Erlpack':decode/2 (lib/grpc/codec/erlpack.ex) calls :erlang.binary_to_term/1 on the raw gRPC message body without the :safe option, no size bound, and no type guard. Any unauthenticated peer that sends a request with Content-Type: application/grpc+erlpack can send a crafted payload that mints arbitrary new atoms (which are never garbage-collected, exhausting the bounded atom table and crashing the VM) or that encodes a fun term which, if applied anywhere downstream, executes attacker-controlled code inside the server process.
This issue affects grpc: from 0.4.0 before 1.0.0. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Erlang OTP ssh (ssh_sftpd module) allows File Discovery.
The SSH_FXP_READLINK handler in ssh_sftpd sends the raw result of file:read_link/2 to the client without calling chroot_filename/2 to strip the backend root prefix. An authenticated SFTP client can create a symlink inside the chroot pointing to /; ssh_sftpd resolves the target to the absolute backend root and stores it on disk. Reading the symlink back via SSH_FXP_READLINK returns that absolute path, for example /data/sftp, instead of the chrooted value /.
The information disclosed is the absolute filesystem path of the SFTP root directory and of any symlink targets within it. No file contents, credentials, or access to paths outside the root directory are obtainable through this issue alone.
This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.13, OTP 28.5.0.2, and OTP 29.0.2, corresponding to ssh from 3.0.1 before 5.2.11.8, 5.5.2.1, and 6.0.1. Whether OTP before OTP 17.0, corresponding to ssh before 3.0.1, is affected is unknown. |
| Improper link resolution before file access ('link following') in Windows Setup Files Cleanup allows an authorized attacker to elevate privileges locally. |
| A flaw was found in multicluster-global-hub. During a ManagedClusterMigration, the system incorrectly grants all managed hubs read access to a shared communication topic. This allows a compromised managed hub to intercept and collect sensitive bootstrap kubeconfigs, which contain API server tokens intended for other hubs. These tokens have an extended validity of approximately 9.86 years, significantly increasing the risk of unauthorized access and information disclosure to other managed clusters. |
