| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Clear the scratch_pt pointer on error
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
(cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8) |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix memory corruption when FW resources change during ifdown
bnxt_set_dflt_rings() assumes that it is always called before any TC has
been created. So it doesn't take bp->num_tc into account and assumes
that it is always 0 or 1.
In the FW resource or capability change scenario, the FW will return
flags in bnxt_hwrm_if_change() that will cause the driver to
reinitialize and call bnxt_cancel_reservations(). This will lead to
bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc
may be greater than 1. This will cause bp->tx_ring[] to be sized too
small and cause memory corruption in bnxt_alloc_cp_rings().
Fix it by properly scaling the TX rings by bp->num_tc in the code
paths mentioned above. Add 2 helper functions to determine
bp->tx_nr_rings and bp->tx_nr_rings_per_tc. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length
The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a
trailing byte, making the actual length is one more byte than the
structs defined.
It caused stack-out-of-bounds and kernel crash:
kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75
kernel:
kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary)
kernel: Workqueue: async async_run_entry_fn
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x76/0xa0
kernel: print_report+0xd1/0x660
kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10
kernel: ? __kasan_slab_free+0x5d/0x80
kernel: ? kasan_addr_to_slab+0xd/0xb0
kernel: kasan_report+0xe1/0x120
kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel: kasan_check_range+0x11c/0x200
kernel: __asan_memcpy+0x3b/0x80
kernel: quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel: ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c]
kernel: quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c]
[...]
kernel: </TASK>
kernel:
kernel: The buggy address belongs to stack of task kworker/u33:2/75
kernel: and is located at offset 48 in frame:
kernel: quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c]
kernel:
kernel: This frame has 3 objects:
kernel: [32, 36) 'hid_desc_addr'
kernel: [48, 59) 'i2c_param'
kernel: [80, 224) 'i2c_config'
ACPI DSD methods return:
\_SB.PC00.THC0.ICRS Buffer 000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00
\_SB.PC00.THC0.ISUB Buffer 00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00
Adding reserved padding to quicki2c_subip_acpi_parameter/config. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version()
in ntrig_report_version(), hdev parameter passed from hid_probe().
sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null
if hdev->dev.parent->parent is null, usb_dev has
invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned
when usb_rcvctrlpipe() use usb_dev,it trigger
page fault error for address(0xffffffffffffff58)
add null check logic to ntrig_report_version()
before calling hid_to_usb_dev() |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add error handling for old state CRTC in atomic_disable
Introduce error handling to address an issue where, after a hotplug
event, the cursor continues to update. This situation can lead to a
kernel panic due to accessing the NULL `old_state->crtc`.
E,g.
Unable to handle kernel NULL pointer dereference at virtual address
Call trace:
mtk_crtc_plane_disable+0x24/0x140
mtk_plane_atomic_update+0x8c/0xa8
drm_atomic_helper_commit_planes+0x114/0x2c8
drm_atomic_helper_commit_tail_rpm+0x4c/0x158
commit_tail+0xa0/0x168
drm_atomic_helper_commit+0x110/0x120
drm_atomic_commit+0x8c/0xe0
drm_atomic_helper_update_plane+0xd4/0x128
__setplane_atomic+0xcc/0x110
drm_mode_cursor_common+0x250/0x440
drm_mode_cursor_ioctl+0x44/0x70
drm_ioctl+0x264/0x5d8
__arm64_sys_ioctl+0xd8/0x510
invoke_syscall+0x6c/0xe0
do_el0_svc+0x68/0xe8
el0_svc+0x34/0x60
el0t_64_sync_handler+0x1c/0xf8
el0t_64_sync+0x180/0x188
Adding NULL pointer checks to ensure stability by preventing operations
on an invalid CRTC state. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...] |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix unregister_netdev call order in macb_remove()
When removing a macb device, the driver calls phy_exit() before
unregister_netdev(). This leads to a WARN from kernfs:
------------[ cut here ]------------
kernfs: can not remove 'attached_dev', no directory
WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683
Call trace:
kernfs_remove_by_name_ns+0xd8/0xf0
sysfs_remove_link+0x24/0x58
phy_detach+0x5c/0x168
phy_disconnect+0x4c/0x70
phylink_disconnect_phy+0x6c/0xc0 [phylink]
macb_close+0x6c/0x170 [macb]
...
macb_remove+0x60/0x168 [macb]
platform_remove+0x5c/0x80
...
The warning happens because the PHY is being exited while the netdev
is still registered. The correct order is to unregister the netdev
before shutting down the PHY and cleaning up the MDIO bus.
Fix this by moving unregister_netdev() ahead of phy_exit() in
macb_remove(). |
| This vulnerability affects Firefox < 143. |
| Cross Site Scripting (xss) vulnerability in ServitiumCRM 2.10 allowing attackers to execute arbitrary code via a crafted URL to the mobile parameter. |
| IBM OpenPages 9.0 and 9.1 allows web page cache to be stored locally which can be read by another user on the system. |
| Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions may incorrectly identify the subdomain of a domain name and create a supercookie, which allows remote attackers who control a website that share the same TLD to read cookies set by the application. |
| In Frappe 15.x.x before 15.72.0 and 14.x.x before 14.96.10, in the function add_tag() at `frappe/desk/doctype/tag/tag.py` is vulnerable to SQL Injection, which allows an attacker to extract information from databases by injecting a SQL query into the `dt` parameter. |
| The MongoDB Windows installation MSI may leave ACLs unset on custom installation directories allowing a local attacker to introduce executable code to MongoDB's process via DLL hijacking. This issue affects MongoDB Server v6.0 version prior to 6.0.25, MongoDB Server v7.0 version prior to 7.0.21 and MongoDB Server v8.0 version prior to 8.0.5 |
| A null pointer dereference vulnerability was discovered in SumatraPDF 3.5.2 during the processing of a crafted .djvu file. When the file is opened, the application crashes inside libmupdf.dll, specifically in the DataPool::has_data() function. |
| Multiple cross-site scripting (XSS) vulnerabilities in Liferay Portal 7.3.0 through 7.4.3.111, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92 and 7.3 GA through update 36 allow remote attackers to inject arbitrary web script or HTML via a crafted payload injected into a "Rich Text" type field to (1) a web content structure, (2) a Documents and Media Document Type , or (3) custom assets that uses the Data Engine's module Rich Text field. |
| Remote staging in Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions does not properly obtain the remote address of the live site from the database which, which allows remote authenticated users to exfiltrate data to an attacker controlled server (i.e., a fake “live site”) via the _com_liferay_exportimport_web_portlet_ExportImportPortlet_remoteAddress and _com_liferay_exportimport_web_portlet_ExportImportPortlet_remotePort parameters. To successfully exploit this vulnerability, an attacker must also successfully obtain the staging server’s shared secret and add the attacker controlled server to the staging server’s whitelist. |
| Seafile versions 11.0.18-Pro, 12.0.10, and 12.0.10-Pro are vulnerable to a stored Cross-Site Scripting (XSS) attack. An authenticated attacker can exploit this vulnerability by modifying their username to include a malicious XSS payload in notification and activities. |
| Dataease is an open source data analytics and visualization platform. In Dataease versions up to 2.10.12, the patch introduced to mitigate DB2 JDBC deserialization remote code execution attacks only blacklisted the rmi parameter. The ldap parameter in the DB2 JDBC connection string was not filtered, allowing attackers to exploit the DB2 JDBC connection string to trigger server-side request forgery (SSRF). In higher versions of Java, ldap deserialization (autoDeserialize) is disabled by default, preventing remote code execution, but SSRF remains exploitable. Versions up to 2.10.12 are affected. The issue is fixed in version 2.10.13. Updating to 2.10.13 or later is recommended. No known workarounds are documented aside from upgrading. |
| Dataease is an open source data analytics and visualization platform. In Dataease versions up to 2.10.12 the H2 data source implementation (H2.java) does not verify that a provided JDBC URL starts with jdbc:h2. This lack of validation allows a crafted JDBC configuration that substitutes the Amazon Redshift driver and leverages the socketFactory and socketFactoryArg parameters to invoke org.springframework.context.support.FileSystemXmlApplicationContext or ClassPathXmlApplicationContext with an attacker‑controlled remote XML resource, resulting in remote code execution. Versions up to and including 2.10.12 are affected. The issue is fixed in version 2.10.13. Updating to version 2.10.13 or later is the recommended remediation. No known workarounds exist. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:
BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
Use-after-free read at 0x0000000000cf164d (in kfence-#111):
lpfc_wr_object+0x235/0x310 [lpfc]
lpfc_write_firmware.cold+0x206/0x30d [lpfc]
lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
kernfs_fop_write_iter+0x121/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1ef/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.
Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release. |
