| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Tear down DMA paths before stopping the rings
tbnet_tear_down() stops both rings and frees their frame buffers before
calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's
descriptor base and tbnet_free_buffers() unmaps and frees the pages the
frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's
'pending' bit, anything still in flight has nowhere to drain to.
The teardown sequence has been in this order since the driver was added.
The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable
DMA paths only after rings are enabled") moved the path enable to the end
of tbnet_connected_work() and documented why:
/* Both logins successful so enable the rings, high-speed DMA
* paths and start the network device queue.
*
* Note we enable the DMA paths last to make sure we have primed
* the Rx ring before any incoming packets are allowed to
* arrive.
*/
Teardown was never updated to match, so the rings and the paths now come
down in the same order they go up instead of in reverse.
On an ASMedia ASM4242 host router the 'pending' bit then never clears:
every teardown burns the full 500 ms timeout and
__tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to
5 s does not help, so the hop is not slow to drain, it never drains
at all.
The failure is invisible above the thunderbolt core.
__tb_path_deactivate_hops() is void and only calls tb_port_warn();
tb_path_deactivate(), tb_tunnel_deactivate() and
__tb_disconnect_xdomain_paths() are void as well, and
tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So
tb_xdomain_disable_paths() reports success and the netdev_warn() below
it never fires. Repeated teardowns eventually take the XDomain control
channel down, after which the peer node is gone and only a power cycle
brings the controller back.
Deactivating the paths first fixes it. Measured with kretprobes on a
stock v6.17 tree with no other patches applied, on a link that was up
and had just carried traffic:
before: __tb_path_deactivate_hop() returns 0 for the first hop, then
-ETIMEDOUT for the second 500335 us later
after: 0 for both, 525 us apart
Alternating the two orderings ABBA over three load levels, four
teardowns per arm: every teardown failed before the change (21 of 21
that ran), none failed after (0 of 24). The before arms ran short
because the link died partway through. The same split shows up when
the interface is enslaved to a bond instead of just brought down, which
is how I ran into this in the first place. Throughput and latency after
the change are unchanged.
Hosts whose routers drain the hop despite the stale descriptor base see
no functional difference, since the paths end up deactivated either way. |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: read le->link under the node lock in tipc_node_link_down()
tipc_node_link_down() caches the link pointer before taking n->lock:
struct tipc_link *l = le->link; /* unlocked */
if (!l)
return;
tipc_node_write_lock(n);
if (!tipc_link_is_establishing(l)) { /* deref l */
...
tipc_link_reset(l); /* write into l */
if (delete) {
kfree(l);
le->link = NULL;
The delete=true caller frees that very object under n->lock, so the lock
does not protect the cached pointer against it:
- CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link
supervision timer via tipc_node_timeout(), reads l unlocked and then
dereferences it under n->lock;
- CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable()
-> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true)
-> kfree(l).
The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers
disable_media() only schedules the asynchronous cleanup_bearer() work, so
its synchronize_net() runs after the links are already gone. An in-flight
CPU A that has read l therefore dereferences freed memory once B frees it:
a use-after-free read in tipc_link_is_establishing(), and a use-after-free
write via tipc_link_reset() on the establishing branch.
The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6:
BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285)
Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0
tipc_link_is_establishing (net/tipc/link.c:285)
tipc_node_link_down (net/tipc/node.c:1076)
tipc_node_timeout (net/tipc/node.c:843)
Allocated by task 9549:
tipc_link_create (net/tipc/link.c:490)
tipc_node_check_dest (net/tipc/node.c:1279)
tipc_disc_rcv (net/tipc/discover.c:252)
tipc_udp_recv (net/tipc/udp_media.c:389)
Freed by task 9549:
tipc_node_link_down (net/tipc/node.c:1084)
tipc_node_delete_links (net/tipc/node.c:1320)
bearer_disable (net/tipc/bearer.c:414)
__tipc_nl_bearer_disable (net/tipc/bearer.c:992)
Move the le->link read inside tipc_node_write_lock(), so it is serialised
against the kfree() in the delete path. A racing teardown now either has
not run yet, and we see a valid link, or has already run, and we see NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
fs,fsverity: remove check for fsverity being enabled in setattr_prepare()
The check that fs-verity is available in the kernel is not necessary
here. Filesystems could have fsverity files even without fs-verity
enabled. In that case, truncate on fsverity file will succeed, what this
check is trying to prevent. |
| The Image Photo Gallery Final Tiles Grid plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'delay' shortcode attribute in all versions up to, and including, 3.6.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Joomla Extension - fabrikar.com - Remote code execution in Fabrik < 4.7.2 - An unauthenticated attacker could execute arbitrary code by using the ajax_calc feature of the calc plugin. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| NLTK versions before 3.9.4 contain a symlink escape vulnerability in CorpusReader.open() that allows local attackers to read arbitrary files outside the corpus root. The vulnerability exists because path validation is lexical and does not account for symlink resolution, enabling attackers to place symlinks inside the corpus root to access files outside the intended boundary. |
| hashcat contains a heap-based buffer overflow (out-of-bounds write) in the outfile_write() function in src/outfile.c. When assembling output into a fixed-size buffer (HCBUFSIZ_LARGE, ~16 MB), the function sequentially appends the username, separator, hash, and plaintext via memcpy without validating that the accumulated length stays within the buffer capacity. When run with --username --show against a crafted hash file containing an oversized username that nearly fills the buffer, the total assembled output exceeds the buffer, causing a heap buffer overflow that can corrupt memory and crash the process. |
| hashcat's fgetl() function in src/filehandling.c writes a null terminator one byte past the caller's buffer when an input line is exactly the buffer length. Attackers can trigger this out-of-bounds heap write by providing a hash file, potfile, or wordlist containing a line of exactly HCBUFSIZ_LARGE bytes. |
| hashcat fails to restrict command-line options when parsing restore files, allowing attackers to inject output-redirecting options like --outfile and --potfile-path. Attackers can craft restore files with malicious options to append attacker-controlled content to arbitrary files, enabling code execution when targeting shell startup files. |
| NLTK versions before 3.9.4 contain an unbounded recursion vulnerability in JSONTaggedDecoder.decode_obj() that allows attackers to cause denial of service by supplying deeply nested JSON structures. Attackers can craft JSON payloads exceeding the recursion limit to trigger an unhandled RecursionError that crashes the Python process. |
| NLTK versions before 3.10.0 contain a logic bug in FileSystemPathPointer.open() where the sandbox validation check compares a normalized path against itself, making the security check permanently inert. Attackers can pass file:// URLs to nltk.data.load() to read arbitrary files accessible to the process user, including credentials and configuration files. |
| NLTK before 3.10.0 contains an arbitrary local file read vulnerability in StreamBackedCorpusView that bypasses pathsec.ENFORCE by calling builtins.open() directly instead of pathsec.open(). Attackers who control the fileid argument can read arbitrary local files regardless of the ENFORCE setting, including sensitive system files and application credentials. |
| NLTK before 3.10.0 (affected versions <= 3.9.4) contains a server-side request forgery (SSRF) vulnerability in the validate_network_url() function in nltk/pathsec.py. The _resolve_hostname() helper catches OSError and ValueError during socket.getaddrinfo() and returns an empty list; when DNS resolution fails, the validation loop executes no IP checks and the function fails open, allowing urlopen() to proceed without validation. An attacker who can trigger DNS resolution failures or use DNS rebinding can bypass SSRF protections and reach restricted network resources, including cloud metadata endpoints (e.g., 169.254.169.254). |
| NLTK before 3.9.3 fails to verify file integrity after downloading packages and before extraction in the downloader module. Attackers can perform man-in-the-middle attacks or DNS poisoning to inject malicious package contents that are extracted without validation. |
| NLTK versions before 3.10.0 default to ENFORCE=False in pathsec.py, causing all security validation functions to emit warnings instead of raising exceptions. Attackers can bypass path traversal and pickle deserialization protections by exploiting the disabled security controls that are only active when manually enabled. |
| NLTK versions before 3.10.0 contain a path traversal vulnerability in FramenetCorpusReader and NKJPCorpusReader that allows attackers to parse XML files outside the corpus root by supplying unsafe selectors or poisoned index state. Attackers can exploit frame_by_name, doc, lu, and header methods with crafted parameters to read arbitrary XML files accessible to the application. |
| NLTK versions before 3.10.2 contain a symlink-based sandbox bypass in FramenetCorpusReader that allows attackers to read arbitrary XML files outside the corpus root. Attackers can place symlinks with names containing no path separators inside the corpus subdirectory, which pass the path validation guard and are resolved to files outside the intended corpus root when accessed via frame_by_name(), _lu_file(), or doc() methods. |
