| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the helper function is valid in get_helper_proto
kernel test robot reported verifier bug [1] where the helper func
pointer could be NULL due to disabled config option.
As Alexei suggested we could check on that in get_helper_proto
directly. Marking tail_call helper func with BPF_PTR_POISON,
because it is unused by design.
[1] https://lore.kernel.org/oe-lkp/202507160818.68358831-lkp@intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the etas_es58x driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, es58x_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN(FD)
frame.
This can result in a buffer overflow. For example, using the es581.4
variant, the frame will be dispatched to es581_4_tx_can_msg(), go
through the last check at the beginning of this function:
if (can_is_canfd_skb(skb))
return -EMSGSIZE;
and reach this line:
memcpy(tx_can_msg->data, cf->data, cf->len);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU or
CANFD_MTU (depending on the device capabilities). By fixing the root
cause, this prevents the buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, hi3110_hard_start_xmit() receives a CAN XL frame which it is
not able to correctly handle and will thus misinterpret it as a CAN
frame. The driver will consume frame->len as-is with no further
checks.
This can result in a buffer overflow later on in hi3110_hw_tx() on
this line:
memcpy(buf + HI3110_FIFO_EXT_DATA_OFF,
frame->data, frame->len);
Here, frame->len corresponds to the flags field of the CAN XL frame.
In our previous example, we set canxl_frame->flags to 0xff. Because
the maximum expected length is 8, a buffer overflow of 247 bytes
occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the sun4i_can driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, sun4ican_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on this line:
dlc = cf->len;
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs a
couple line below when doing:
for (i = 0; i < dlc; i++)
writel(cf->data[i], priv->base + (dreg + i * 4));
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: Update napi->skb after XDP process
The syzbot report a UAF issue:
BUG: KASAN: slab-use-after-free in skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
BUG: KASAN: slab-use-after-free in napi_frags_skb net/core/gro.c:723 [inline]
BUG: KASAN: slab-use-after-free in napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
Read of size 8 at addr ffff88802ef22c18 by task syz.0.17/6079
CPU: 0 UID: 0 PID: 6079 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
skb_reset_mac_header include/linux/skbuff.h:3150 [inline]
napi_frags_skb net/core/gro.c:723 [inline]
napi_gro_frags+0x6e/0x1030 net/core/gro.c:758
tun_get_user+0x28cb/0x3e20 drivers/net/tun.c:1920
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:330 [inline]
__kasan_mempool_unpoison_object+0xa0/0x170 mm/kasan/common.c:558
kasan_mempool_unpoison_object include/linux/kasan.h:388 [inline]
napi_skb_cache_get+0x37b/0x6d0 net/core/skbuff.c:295
__alloc_skb+0x11e/0x2d0 net/core/skbuff.c:657
napi_alloc_skb+0x84/0x7d0 net/core/skbuff.c:811
napi_get_frags+0x69/0x140 net/core/gro.c:673
tun_napi_alloc_frags drivers/net/tun.c:1404 [inline]
tun_get_user+0x77c/0x3e20 drivers/net/tun.c:1784
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6079:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x5b/0x80 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2422 [inline]
slab_free mm/slub.c:4695 [inline]
kmem_cache_free+0x18f/0x400 mm/slub.c:4797
skb_pp_cow_data+0xdd8/0x13e0 net/core/skbuff.c:969
netif_skb_check_for_xdp net/core/dev.c:5390 [inline]
netif_receive_generic_xdp net/core/dev.c:5431 [inline]
do_xdp_generic+0x699/0x11a0 net/core/dev.c:5499
tun_get_user+0x2523/0x3e20 drivers/net/tun.c:1872
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1996
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
After commit e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in
generic mode"), the original skb may be freed in skb_pp_cow_data() when
XDP program was attached, which was allocated in tun_napi_alloc_frags().
However, the napi->skb still point to the original skb, update it after
XDP process. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
This fixes the following UAF caused by not properly locking hdev when
processing HCI_EV_NUM_COMP_PKTS:
BUG: KASAN: slab-use-after-free in hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036
Read of size 4 at addr ffff8880740f0940 by task kworker/u11:0/54
CPU: 1 UID: 0 PID: 54 Comm: kworker/u11:0 Not tainted 6.16.0-rc7 #3 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci1 hci_rx_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x230 mm/kasan/report.c:480
kasan_report+0x118/0x150 mm/kasan/report.c:593
hci_conn_tx_dequeue+0x1be/0x220 net/bluetooth/hci_conn.c:3036
hci_num_comp_pkts_evt+0x1c8/0xa50 net/bluetooth/hci_event.c:4404
hci_event_func net/bluetooth/hci_event.c:7477 [inline]
hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531
hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 54:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
__hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939
le_conn_complete_evt+0x3d6/0x1220 net/bluetooth/hci_event.c:5628
hci_le_enh_conn_complete_evt+0x189/0x470 net/bluetooth/hci_event.c:5794
hci_event_func net/bluetooth/hci_event.c:7474 [inline]
hci_event_packet+0x78c/0x1200 net/bluetooth/hci_event.c:7531
hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
Freed by task 9572:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
device_release+0x9c/0x1c0
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x22b/0x480 lib/kobject.c:737
hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline]
hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173
hci_abort_conn_sync+0x5d1/0xdf0 net/bluetooth/hci_sync.c:5689
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
This fixes the following UFA in hci_acl_create_conn_sync where a
connection still pending is command submission (conn->state == BT_OPEN)
maybe freed, also since this also can happen with the likes of
hci_le_create_conn_sync fix it as well:
BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861
Write of size 2 at addr ffff88805ffcc038 by task kworker/u11:2/9541
CPU: 1 UID: 0 PID: 9541 Comm: kworker/u11:2 Not tainted 6.16.0-rc7 #3 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci3 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x230 mm/kasan/report.c:480
kasan_report+0x118/0x150 mm/kasan/report.c:593
hci_acl_create_conn_sync+0x5ef/0x790 net/bluetooth/hci_sync.c:6861
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16-rc7/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 123736:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
__hci_conn_add+0x233/0x1b30 net/bluetooth/hci_conn.c:939
hci_conn_add_unset net/bluetooth/hci_conn.c:1051 [inline]
hci_connect_acl+0x16c/0x4e0 net/bluetooth/hci_conn.c:1634
pair_device+0x418/0xa70 net/bluetooth/mgmt.c:3556
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x54b/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 103680:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
device_release+0x9c/0x1c0
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x22b/0x480 lib/kobject.c:737
hci_conn_cleanup net/bluetooth/hci_conn.c:175 [inline]
hci_conn_del+0x8ff/0xcb0 net/bluetooth/hci_conn.c:1173
hci_conn_complete_evt+0x3c7/0x1040 net/bluetooth/hci_event.c:3199
hci_event_func net/bluetooth/hci_event.c:7477 [inline]
hci_event_packet+0x7e0/0x1200 net/bluetooth/hci_event.c:7531
hci_rx_work+0x46a/0xe80 net/bluetooth/hci_core.c:4070
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/sour
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible UAFs
This attemps to fix possible UAFs caused by struct mgmt_pending being
freed while still being processed like in the following trace, in order
to fix mgmt_pending_valid is introduce and use to check if the
mgmt_pending hasn't been removed from the pending list, on the complete
callbacks it is used to check and in addtion remove the cmd from the list
while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd
is left on the list it can still be accessed and freed.
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55
CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 12210:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296
__add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247
add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
sock_write_iter+0x258/0x330 net/socket.c:1133
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 12221:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4648 [inline]
kfree+0x18e/0x440 mm/slub.c:4847
mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline]
mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257
__mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444
hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290
hci_dev_do_close net/bluetooth/hci_core.c:501 [inline]
hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526
sock_do_ioctl+0xd9/0x300 net/socket.c:1192
sock_ioctl+0x576/0x790 net/socket.c:1313
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: Forbid FDB status change while nexthop is in a group
The kernel forbids the creation of non-FDB nexthop groups with FDB
nexthops:
# ip nexthop add id 1 via 192.0.2.1 fdb
# ip nexthop add id 2 group 1
Error: Non FDB nexthop group cannot have fdb nexthops.
And vice versa:
# ip nexthop add id 3 via 192.0.2.2 dev dummy1
# ip nexthop add id 4 group 3 fdb
Error: FDB nexthop group can only have fdb nexthops.
However, as long as no routes are pointing to a non-FDB nexthop group,
the kernel allows changing the type of a nexthop from FDB to non-FDB and
vice versa:
# ip nexthop add id 5 via 192.0.2.2 dev dummy1
# ip nexthop add id 6 group 5
# ip nexthop replace id 5 via 192.0.2.2 fdb
# echo $?
0
This configuration is invalid and can result in a NPD [1] since FDB
nexthops are not associated with a nexthop device:
# ip route add 198.51.100.1/32 nhid 6
# ping 198.51.100.1
Fix by preventing nexthop FDB status change while the nexthop is in a
group:
# ip nexthop add id 7 via 192.0.2.2 dev dummy1
# ip nexthop add id 8 group 7
# ip nexthop replace id 7 via 192.0.2.2 fdb
Error: Cannot change nexthop FDB status while in a group.
[1]
BUG: kernel NULL pointer dereference, address: 00000000000003c0
[...]
Oops: Oops: 0000 [#1] SMP
CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:fib_lookup_good_nhc+0x1e/0x80
[...]
Call Trace:
<TASK>
fib_table_lookup+0x541/0x650
ip_route_output_key_hash_rcu+0x2ea/0x970
ip_route_output_key_hash+0x55/0x80
__ip4_datagram_connect+0x250/0x330
udp_connect+0x2b/0x60
__sys_connect+0x9c/0xd0
__x64_sys_connect+0x18/0x20
do_syscall_64+0xa4/0x2a0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fs, fix UAF in flow counter release
Fix a kernel trace [1] caused by releasing an HWS action of a local flow
counter in mlx5_cmd_hws_delete_fte(), where the HWS action refcount and
mutex were not initialized and the counter struct could already be freed
when deleting the rule.
Fix it by adding the missing initializations and adding refcount for the
local flow counter struct.
[1] Kernel log:
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
mlx5_fs_put_hws_action.part.0.cold+0x21/0x94 [mlx5_core]
mlx5_fc_put_hws_action+0x96/0xad [mlx5_core]
mlx5_fs_destroy_fs_actions+0x8b/0x152 [mlx5_core]
mlx5_cmd_hws_delete_fte+0x5a/0xa0 [mlx5_core]
del_hw_fte+0x1ce/0x260 [mlx5_core]
mlx5_del_flow_rules+0x12d/0x240 [mlx5_core]
? ttwu_queue_wakelist+0xf4/0x110
mlx5_ib_destroy_flow+0x103/0x1b0 [mlx5_ib]
uverbs_free_flow+0x20/0x50 [ib_uverbs]
destroy_hw_idr_uobject+0x1b/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x34/0x1a0 [ib_uverbs]
uobj_destroy+0x3c/0x80 [ib_uverbs]
ib_uverbs_run_method+0x23e/0x360 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
ib_uverbs_cmd_verbs+0x14f/0x2c0 [ib_uverbs]
? do_tty_write+0x1a9/0x270
? file_tty_write.constprop.0+0x98/0xc0
? new_sync_write+0xfc/0x190
ib_uverbs_ioctl+0xd7/0x160 [ib_uverbs]
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x59/0x90 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent use-after-free during requeue-PI
syzbot managed to trigger the following race:
T1 T2
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue()
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
requeue_pi_wake_futex()
futex_requeue_pi_complete()
/* preempt */
* timeout/ signal wakes T1 *
futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED
futex_hash_put()
// back to userland, on stack futex_q is garbage
/* back */
wake_up_state(q->task, TASK_NORMAL);
In this scenario futex_wait_requeue_pi() is able to leave without using
futex_q::lock_ptr for synchronization.
This can be prevented by reading futex_q::task before updating the
futex_q::requeue_state. A reference on the task_struct is not needed
because requeue_pi_wake_futex() is invoked with a spinlock_t held which
implies a RCU read section.
Even if T1 terminates immediately after, the task_struct will remain valid
during T2's wake_up_state(). A READ_ONCE on futex_q::task before
futex_requeue_pi_complete() is enough because it ensures that the variable
is read before the state is updated.
Read futex_q::task before updating the requeue state, use it for the
following wakeup. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Use correct exit on failure from futex_hash_allocate_default()
copy_process() uses the wrong error exit path from futex_hash_allocate_default().
After exiting from futex_hash_allocate_default(), neither tasklist_lock
nor siglock has been acquired. The exit label bad_fork_core_free unlocks
both of these locks which is wrong.
The next exit label, bad_fork_cancel_cgroup, is the correct exit.
sched_cgroup_fork() did not allocate any resources that need to freed.
Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix wrong index reference in smb2_compound_op()
In smb2_compound_op(), the loop that processes each command's response
uses wrong indices when accessing response bufferes.
This incorrect indexing leads to improper handling of command results.
Also, if incorrectly computed index is greather than or equal to
MAX_COMPOUND, it can cause out-of-bounds accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add validation for ring_len param
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix idx validation in i40e_validate_queue_map
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_validate_queue_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix idx validation in config queues msg
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_vc_config_queues_msg(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix input validation logic for action_meta
Fix condition to check 'greater or equal' to prevent OOB dereference. |
