| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: check IFF_UP earlier in Tx path
Xsk Tx can be triggered via either sendmsg() or poll() syscalls. These
two paths share a call to common function xsk_xmit() which has two
sanity checks within. A pseudo code example to show the two paths:
__xsk_sendmsg() : xsk_poll():
if (unlikely(!xsk_is_bound(xs))) if (unlikely(!xsk_is_bound(xs)))
return -ENXIO; return mask;
if (unlikely(need_wait)) (...)
return -EOPNOTSUPP; xsk_xmit()
mark napi id
(...)
xsk_xmit()
xsk_xmit():
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
As it can be observed above, in sendmsg() napi id can be marked on
interface that was not brought up and this causes a NULL ptr
dereference:
[31757.505631] BUG: kernel NULL pointer dereference, address: 0000000000000018
[31757.512710] #PF: supervisor read access in kernel mode
[31757.517936] #PF: error_code(0x0000) - not-present page
[31757.523149] PGD 0 P4D 0
[31757.525726] Oops: 0000 [#1] PREEMPT SMP NOPTI
[31757.530154] CPU: 26 PID: 95641 Comm: xdpsock Not tainted 6.2.0-rc5+ #40
[31757.536871] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[31757.547457] RIP: 0010:xsk_sendmsg+0xde/0x180
[31757.551799] Code: 00 75 a2 48 8b 00 a8 04 75 9b 84 d2 74 69 8b 85 14 01 00 00 85 c0 75 1b 48 8b 85 28 03 00 00 48 8b 80 98 00 00 00 48 8b 40 20 <8b> 40 18 89 85 14 01 00 00 8b bd 14 01 00 00 81 ff 00 01 00 00 0f
[31757.570840] RSP: 0018:ffffc90034f27dc0 EFLAGS: 00010246
[31757.576143] RAX: 0000000000000000 RBX: ffffc90034f27e18 RCX: 0000000000000000
[31757.583389] RDX: 0000000000000001 RSI: ffffc90034f27e18 RDI: ffff88984cf3c100
[31757.590631] RBP: ffff88984714a800 R08: ffff88984714a800 R09: 0000000000000000
[31757.597877] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffa
[31757.605123] R13: 0000000000000000 R14: 0000000000000003 R15: 0000000000000000
[31757.612364] FS: 00007fb4c5931180(0000) GS:ffff88afdfa00000(0000) knlGS:0000000000000000
[31757.620571] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[31757.626406] CR2: 0000000000000018 CR3: 000000184b41c003 CR4: 00000000007706e0
[31757.633648] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[31757.640894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[31757.648139] PKRU: 55555554
[31757.650894] Call Trace:
[31757.653385] <TASK>
[31757.655524] sock_sendmsg+0x8f/0xa0
[31757.659077] ? sockfd_lookup_light+0x12/0x70
[31757.663416] __sys_sendto+0xfc/0x170
[31757.667051] ? do_sched_setscheduler+0xdb/0x1b0
[31757.671658] __x64_sys_sendto+0x20/0x30
[31757.675557] do_syscall_64+0x38/0x90
[31757.679197] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[31757.687969] Code: 8e f6 ff 44 8b 4c 24 2c 4c 8b 44 24 20 41 89 c4 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 3a 44 89 e7 48 89 44 24 08 e8 b5 8e f6 ff 48
[31757.707007] RSP: 002b:00007ffd49c73c70 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[31757.714694] RAX: ffffffffffffffda RBX: 000055a996565380 RCX: 00007fb4c5727c16
[31757.721939] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[31757.729184] RBP: 0000000000000040 R08: 0000000000000000 R09: 0000000000000000
[31757.736429] R10: 0000000000000040 R11: 0000000000000293 R12: 0000000000000000
[31757.743673] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[31757.754940] </TASK>
To fix this, let's make xsk_xmit a function that will be responsible for
generic Tx, where RCU is handled accordingly and pull out sanity checks
and xs->zc handling. Populate sanity checks to __xsk_sendmsg() and
xsk_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/hisi: Drop second sensor hi3660
The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm
allocators") exposes a panic "BRK handler: Fatal exception" on the
hi3660_thermal_probe funciton.
This is because the function allocates memory for only one
sensors array entry, but tries to fill up a second one.
Fix this by removing the unneeded second access. |
| Improper Input Validation vulnerability in Mozilla neqo leads to an unexploitable crash..This issue affects neqo: from 0.4.24 through 0.13.2. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
Callers of `btrfs_reduce_alloc_profile` expect it to return exactly
one allocation profile flag, and failing to do so may ultimately
result in a WARN_ON and remount-ro when allocating new blocks, like
the below transaction abort on 6.1.
`btrfs_reduce_alloc_profile` has two ways of determining the profile,
first it checks if a conversion balance is currently running and
uses the profile we're converting to. If no balance is currently
running, it returns the max-redundancy profile which at least one
block in the selected block group has.
This works by simply checking each known allocation profile bit in
redundancy order. However, `btrfs_reduce_alloc_profile` has not been
updated as new flags have been added - first with the `DUP` profile
and later with the RAID1C34 profiles.
Because of the way it checks, if we have blocks with different
profiles and at least one is known, that profile will be selected.
However, if none are known we may return a flag set with multiple
allocation profiles set.
This is currently only possible when a balance from one of the three
unhandled profiles to another of the unhandled profiles is canceled
after allocating at least one block using the new profile.
In that case, a transaction abort like the below will occur and the
filesystem will need to be mounted with -o skip_balance to get it
mounted rw again (but the balance cannot be resumed without a
similar abort).
[770.648] ------------[ cut here ]------------
[770.648] BTRFS: Transaction aborted (error -22)
[770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs]
[770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G W 6.1.0-0.deb11.7-powerpc64le #1 Debian 6.1.20-2~bpo11+1a~test
[770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[770.648] NIP: c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0
[770.648] REGS: c000200089afe9a0 TRAP: 0700 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test)
[770.648] MSR: 9000000002029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28848282 XER: 20040000
[770.648] CFAR: c000000000135110 IRQMASK: 0
GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026
GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027
GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8
GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000
GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001
GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800
GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001
[770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs]
[770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs]
[770.648] Call Trace:
[770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable)
[770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs]
[770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs]
[770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs]
[770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs]
[770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs]
[770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs]
[770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs]
[770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs]
[770.648] [
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
Hyper-V provides the ability to connect Fibre Channel LUNs to the host
system and present them in a guest VM as a SCSI device. I/O to the vFC
device is handled by the storvsc driver. The storvsc driver includes a
partial integration with the FC transport implemented in the generic
portion of the Linux SCSI subsystem so that FC attributes can be displayed
in /sys. However, the partial integration means that some aspects of vFC
don't work properly. Unfortunately, a full and correct integration isn't
practical because of limitations in what Hyper-V provides to the guest.
In particular, in the context of Hyper-V storvsc, the FC transport timeout
function fc_eh_timed_out() causes a kernel panic because it can't find the
rport and dereferences a NULL pointer. The original patch that added the
call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this
regard.
In many cases a timeout is due to a transient condition, so the situation
can be improved by just continuing to wait like with other I/O requests
issued by storvsc, and avoiding the guaranteed panic. For a permanent
failure, continuing to wait may result in a hung thread instead of a panic,
which again may be better.
So fix the panic by removing the storvsc call to fc_eh_timed_out(). This
allows storvsc to keep waiting for a response. The change has been tested
by users who experienced a panic in fc_eh_timed_out() due to transient
timeouts, and it solves their problem.
In the future we may want to deprecate the vFC functionality in storvsc
since it can't be fully fixed. But it has current users for whom it is
working well enough, so it should probably stay for a while longer. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount
is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to
S_AUTOMOUNT and corresponding dentry flags is retained regardless of
CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in
VFS follow_automount() when traversing a DFS referral link:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
__traverse_mounts+0xb5/0x220
? cifs_revalidate_mapping+0x65/0xc0 [cifs]
step_into+0x195/0x610
? lookup_fast+0xe2/0xf0
path_lookupat+0x64/0x140
filename_lookup+0xc2/0x140
? __create_object+0x299/0x380
? kmem_cache_alloc+0x119/0x220
? user_path_at_empty+0x31/0x50
user_path_at_empty+0x31/0x50
__x64_sys_chdir+0x2a/0xd0
? exit_to_user_mode_prepare+0xca/0x100
do_syscall_64+0x42/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler
when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to
avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This
approach was chosen as it provides more control over the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand
While trying to get the subpage blocksize tests running, I hit the
following panic on generic/476
assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
kernel BUG at fs/btrfs/subpage.c:229!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : btrfs_subpage_assert+0xbc/0xf0
lr : btrfs_subpage_assert+0xbc/0xf0
Call trace:
btrfs_subpage_assert+0xbc/0xf0
btrfs_subpage_clear_checked+0x38/0xc0
btrfs_page_clear_checked+0x48/0x98
btrfs_truncate_block+0x5d0/0x6a8
btrfs_cont_expand+0x5c/0x528
btrfs_write_check.isra.0+0xf8/0x150
btrfs_buffered_write+0xb4/0x760
btrfs_do_write_iter+0x2f8/0x4b0
btrfs_file_write_iter+0x1c/0x30
do_iter_readv_writev+0xc8/0x158
do_iter_write+0x9c/0x210
vfs_iter_write+0x24/0x40
iter_file_splice_write+0x224/0x390
direct_splice_actor+0x38/0x68
splice_direct_to_actor+0x12c/0x260
do_splice_direct+0x90/0xe8
generic_copy_file_range+0x50/0x90
vfs_copy_file_range+0x29c/0x470
__arm64_sys_copy_file_range+0xcc/0x498
invoke_syscall.constprop.0+0x80/0xd8
do_el0_svc+0x6c/0x168
el0_svc+0x50/0x1b0
el0t_64_sync_handler+0x114/0x120
el0t_64_sync+0x194/0x198
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: install stub fence into potential unused fence pointers
When using cpu to update page tables, vm update fences are unused.
Install stub fence into these fence pointers instead of NULL
to avoid NULL dereference when calling dma_fence_wait() on them. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_mqs: move of_node_put() to the correct location
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns. |
| lunary-ai/lunary versions prior to 1.9.24 are vulnerable to stored cross-site scripting (XSS). An unauthenticated attacker can inject malicious JavaScript into the `v1/runs/ingest` endpoint by adding an empty `citations` field, triggering a code path where `dangerouslySetInnerHTML` is used to render attacker-controlled text. This vulnerability allows the execution of arbitrary JavaScript in the context of the user's browser, potentially leading to session hijacking, data theft, or other malicious actions. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01717526; Issue ID: MSV-5591. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01661189; Issue ID: MSV-4298. |
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01677581; Issue ID: MSV-4701. |
| In GPU pdma, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS10117741; Issue ID: MSV-4538. |
| In GPU pdma, there is a possible memory corruption due to a missing permission check. This could lead to local denial of service with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS10117735; Issue ID: MSV-4539. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10184870; Issue ID: MSV-4752. |
| In display, there is a possible out of bounds read due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10184297; Issue ID: MSV-4759. |
| In display, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10196993; Issue ID: MSV-4797. |
| In display, there is a possible memory corruption due to use after free. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10182914; Issue ID: MSV-4795. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10196993; Issue ID: MSV-4796. |
