| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix unregister_netdev call order in macb_remove()
When removing a macb device, the driver calls phy_exit() before
unregister_netdev(). This leads to a WARN from kernfs:
------------[ cut here ]------------
kernfs: can not remove 'attached_dev', no directory
WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683
Call trace:
kernfs_remove_by_name_ns+0xd8/0xf0
sysfs_remove_link+0x24/0x58
phy_detach+0x5c/0x168
phy_disconnect+0x4c/0x70
phylink_disconnect_phy+0x6c/0xc0 [phylink]
macb_close+0x6c/0x170 [macb]
...
macb_remove+0x60/0x168 [macb]
platform_remove+0x5c/0x80
...
The warning happens because the PHY is being exited while the netdev
is still registered. The correct order is to unregister the netdev
before shutting down the PHY and cleaning up the MDIO bus.
Fix this by moving unregister_netdev() ahead of phy_exit() in
macb_remove(). |
| This vulnerability affects Firefox < 143. |
| Cross Site Scripting (xss) vulnerability in ServitiumCRM 2.10 allowing attackers to execute arbitrary code via a crafted URL to the mobile parameter. |
| IBM OpenPages 9.0 and 9.1 allows web page cache to be stored locally which can be read by another user on the system. |
| Liferay Portal 7.4.0 through 7.4.3.105, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions may incorrectly identify the subdomain of a domain name and create a supercookie, which allows remote attackers who control a website that share the same TLD to read cookies set by the application. |
| In Frappe 15.x.x before 15.72.0 and 14.x.x before 14.96.10, in the function add_tag() at `frappe/desk/doctype/tag/tag.py` is vulnerable to SQL Injection, which allows an attacker to extract information from databases by injecting a SQL query into the `dt` parameter. |
| The MongoDB Windows installation MSI may leave ACLs unset on custom installation directories allowing a local attacker to introduce executable code to MongoDB's process via DLL hijacking. This issue affects MongoDB Server v6.0 version prior to 6.0.25, MongoDB Server v7.0 version prior to 7.0.21 and MongoDB Server v8.0 version prior to 8.0.5 |
| A null pointer dereference vulnerability was discovered in SumatraPDF 3.5.2 during the processing of a crafted .djvu file. When the file is opened, the application crashes inside libmupdf.dll, specifically in the DataPool::has_data() function. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap api: Fix possible memory leak for vcap_dup_rule()
Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak
occurs. If kzalloc() for duprule succeeds, but the following
kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree
them in the error path.
unreferenced object 0xffff122744c50600 (size 192):
comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s)
hex dump (first 32 bytes):
10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,...
00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'...
backtrace:
[<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8
[<0000000001bedc67>] kmalloc_trace+0x38/0x88
[<00000000b0612f98>] vcap_dup_rule+0x50/0x460
[<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038
[<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494
[<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698
[<00000000c8766299>] kunit_try_run_case+0xe0/0x20c
[<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94
[<00000000f6864acf>] kthread+0x2e8/0x374
[<0000000022e639b3>] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup()
Syzbot reported a null-ptr-deref bug:
ntfs3: loop0: Different NTFS' sector size (1024) and media sector size
(512)
ntfs3: loop0: Mark volume as dirty due to NTFS errors
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline]
RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796
Call Trace:
<TASK>
d_splice_alias+0x122/0x3b0 fs/dcache.c:3191
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3688
do_filp_open+0x264/0x4f0 fs/namei.c:3718
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_open fs/open.c:1334 [inline]
__se_sys_open fs/open.c:1330 [inline]
__x64_sys_open+0x221/0x270 fs/open.c:1330
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If the MFT record of ntfs inode is not a base record, inode->i_op can be
NULL. And a null-ptr-deref may happen:
ntfs_lookup()
dir_search_u() # inode->i_op is set to NULL
d_splice_alias()
__d_add()
d_flags_for_inode() # inode->i_op->get_link null-ptr-deref
Fix this by adding a Check on inode->i_op before calling the
d_splice_alias() function. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix use-after-free KFENCE violation during sysfs firmware write
During the sysfs firmware write process, a use-after-free read warning is
logged from the lpfc_wr_object() routine:
BUG: KFENCE: use-after-free read in lpfc_wr_object+0x235/0x310 [lpfc]
Use-after-free read at 0x0000000000cf164d (in kfence-#111):
lpfc_wr_object+0x235/0x310 [lpfc]
lpfc_write_firmware.cold+0x206/0x30d [lpfc]
lpfc_sli4_request_firmware_update+0xa6/0x100 [lpfc]
lpfc_request_firmware_upgrade_store+0x66/0xb0 [lpfc]
kernfs_fop_write_iter+0x121/0x1b0
new_sync_write+0x11c/0x1b0
vfs_write+0x1ef/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x59/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The driver accessed wr_object pointer data, which was initialized into
mailbox payload memory, after the mailbox object was released back to the
mailbox pool.
Fix by moving the mailbox free calls to the end of the routine ensuring
that we don't reference internal mailbox memory after release. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up
gets called for uninitialized wait queue sp->nvme_ls_waitq.
qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0
qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
RIP: 0010:__wake_up_common+0x4c/0x190
RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__wake_up_common_lock+0x7c/0xc0
qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed
previously in the commits tagged Fixed: below. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix unreferenced object reported by kmemleak in ubi_resize_volume()
There is a memory leaks problem reported by kmemleak:
unreferenced object 0xffff888102007a00 (size 128):
comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s)
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi]
[<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi]
[<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi]
[<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170
[<ffffffff83c142a5>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.
Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix i_disksize exceeding i_size problem in paritally written case
It is possible for i_disksize can exceed i_size, triggering a warning.
generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len
ext4_da_write_end
| ext4_update_i_disksize
| new_i_size = pos + copied;
| WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
| generic_write_end
| copied = block_write_end(copied, len) // copied = 0
| if (unlikely(copied < len))
| if (!PageUptodate(page))
| copied = 0;
| if (pos + copied > inode->i_size) // return false
if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
We get i_disksize greater than i_size here, which could trigger WARNING
check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:
ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops
WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
RIP: 0010:ext4_file_write_iter+0xbc7
Call Trace:
vfs_write+0x3b1
ksys_write+0x77
do_syscall_64+0x39
Fix it by updating 'copied' value before updating i_disksize just like
ext4_write_inline_data_end() does.
A reproducer can be found in the buganizer link below. |
| is-arrayish checks if an object can be used like an Array. On 8 September 2025, an npm publishing account for is-arrayish was taken over after a phishing attack. Version 0.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 0.3.4. |
| error-ex allows error subclassing and stack customization. On 8 September 2025, an npm publishing account for error-ex was taken over after a phishing attack. Version 1.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 1.3.4. |
| color-convert provides plain color conversion functions in JavaScript. On 8 September 2025, the npm publishing account for color-convert was taken over after a phishing attack. Version 3.1.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 3.1.2. |
| hackmd-mcp is a Model Context Protocol server for integrating HackMD's note-taking platform with AI assistants. From 1.4.0 to before 1.5.0, hackmd-mcp contains a server-side request forgery (SSRF) vulnerability when the server is run in HTTP transport mode. Arbitrary hackmdApiUrl values supplied via the Hackmd-Api-Url HTTP header or a base64-encoded JSON query parameter are accepted without validation, allowing attackers to redirect outbound API requests to internal network services, access internal endpoints, perform network reconnaissance, and bypass network access controls. The stdio transport mode is not affected because it only accepts stdio requests. The issue is fixed in version 1.5.0, which enforces allowed endpoints and supports the ALLOWED_HACKMD_API_URLS environment variable. Users should update to 1.5.0 or later or apply documented mitigations such as switching to stdio mode, restricting outbound network access, or filtering the Hackmd-Api-Url header and related query parameter via a reverse proxy. |
| Openfire is an XMPP server licensed under the Open Source Apache License. Openfire’s SASL EXTERNAL mechanism for client TLS authentication contains a vulnerability in how it extracts user identities from X.509 certificates. Instead of parsing the structured ASN.1 data, the code calls X509Certificate.getSubjectDN().getName() and applies a regex to look for CN=. This method produces a provider-dependent string that does not escape special characters. In SunJSSE (sun.security.x509.X500Name), for example, commas and equals signs inside attribute values are not escaped. As a result, a malicious certificate can embed CN= inside another attribute value (e.g. OU="CN=admin,"). The regex will incorrectly interpret this as a legitimate Common Name and extract admin. If SASL EXTERNAL is enabled and configured to map CNs to user accounts, this allows the attacker to impersonate another user. The fix is included in Openfire 5.0.2 and 5.1.0. |
| color-name is a JSON with CSS color names. On 8 September 2025, an npm publishing account for color-name was taken over after a phishing attack. Version 2.0.1 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 2.0.2. |
