| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the document controller’s `patient_picture` context serves the patient’s photo by document ID or patient ID without verifying that the current user is authorized to access that patient. An authenticated user with document ACL can supply another patient’s ID and retrieve their photo. Version 8.0.0 fixes the issue. |
| OpenEMR is a free and open source electronic health records and medical practice management application. Prior to version 8.0.0, the Layout-Based Form (LBF) printable view accepts `formid` and `visitid` (or `patientid`) from the request and does not verify that the form belongs to the current user’s authorized patient/encounter. An authenticated user with LBF access can enumerate form IDs and view or print any patient’s encounter forms. Version 8.0.0 fixes the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, Magick fails to check for multi-layer nested mvg conversions to svg, leading to DoS. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| Rufus is a utility that helps format and create bootable USB flash drives. Versions 4.11 and below contain a race condition (TOCTOU) in src/net.c during the creation, validation, and execution of the Fido PowerShell script. Since Rufus runs with elevated privileges (Administrator) but writes the script to the %TEMP% directory (writeable by standard users) without locking the file, a local attacker can replace the legitimate script with a malicious one between the file write operation and the execution step. This allows arbitrary code execution with Administrator privileges. This issue has been fixed in version 4.12_BETA. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, when a PCD file does not contain a valid Sync marker, the DecodeImage() function becomes trapped in an infinite loop while searching for the Sync marker, causing the program to become unresponsive and continuously consume CPU resources, ultimately leading to system resource exhaustion and denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a heap buffer over-read vulnerability exists in multiple raw image format handles. The vulnerability occurs when processing images with -extract dimensions larger than -size dimensions, causing out-of-bounds memory reads from a heap-allocated buffer. Versions 7.1.2-15 and 6.9.13-40 contain a patch. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak in the ASHLAR image writer allows an attacker to exhaust process memory by providing a crafted image that results in small objects that are allocated but never freed. Version 7.1.2-15 contains a patch. |
| The Flat Shipping Rate by City for WooCommerce plugin for WordPress is vulnerable to time-based SQL Injection via the 'cities' parameter in all versions up to, and including, 1.0.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Due to an uncontrolled resource consumption (Denial of Service) vulnerability, an authenticated attacker with regular user privileges and network access can repeatedly invoke a remote-enabled function module with an excessively large loop-control parameter. This triggers prolonged loop execution that consumes excessive system resources, potentially rendering the system unavailable. Successful exploitation results in a denial-of-service condition that impacts availability, while confidentiality and integrity remain unaffected. |
| A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
QuTS hero h5.3.2.3354 build 20251225 and later |
| BloodX 1.0 contains an authentication bypass vulnerability in login.php that allows attackers to access the dashboard without valid credentials. Attackers can exploit the vulnerability by sending a crafted payload with '=''or' parameters to bypass login authentication and gain unauthorized access. |
| The FTP Backup on the ADM will not properly strictly enforce TLS certificate verification while connecting to an FTP server using FTPES/FTPS. An improper validated TLS/SSL certificates allows a remote attacker can intercept network traffic to perform a Man-in-the-Middle (MitM) attack, which may intercept, modify, or obtain sensitive information such as authentication credentials and backup data.
Affected products and versions include: from ADM 4.1.0 through ADM 4.3.3.ROF1 as well as from ADM 5.0.0 through ADM 5.1.2.RE51. |
| Pro3W CMS if vulnerable to SQL injection attacks. Improper neutralization of input provided into a login form allows an unauthenticated attacker to bypass authentication and gain administrative privileges.
This issue was identified in version 1.2.0 of this software. Due to lack of response from the vendor exact version range could not be determined, but the vulnerability should be eliminated in versions released in January 2026 and later. |
| Under specific conditions when processing a maliciously crafted value of type Hash r, Mongoid::Criteria.from_hash may allow for executing arbitrary Ruby code. |
| Ajenti is a Linux and BSD modular server admin panel. Prior to version 2.2.13, an unauthenticated user could gain access to a server to execute arbitrary code on this server. This is fixed in the version 2.2.13. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, a second-order expression injection vulnerability existed in n8n's Form nodes that could allow an unauthenticated attacker to inject and evaluate arbitrary n8n expressions by submitting crafted form data. When chained with an expression sandbox escape, this could escalate to remote code execution on the n8n host. The vulnerability requires a specific workflow configuration to be exploitable. First, a form node with a field interpolating a value provided by an unauthenticated user, e.g. a form submitted value. Second, the field value must begin with an `=` character, which caused n8n to treat it as an expression and triggered a double-evaluation of the field content. There is no practical reason for a workflow designer to prefix a field with `=` intentionally — the character is not rendered in the output, so the result would not match the designer's expectations. If added accidentally, it would be noticeable and very unlikely to persist. An unauthenticated attacker would need to either know about this specific circumstance on a target instance or discover a matching form by chance. Even when the preconditions are met, the expression injection alone is limited to data accessible within the n8n expression context. Escalation to remote code execution requires chaining with a separate sandbox escape vulnerability. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Review usage of form nodes manually for above mentioned preconditions, disable the Form node by adding `n8n-nodes-base.form` to the `NODES_EXCLUDE` environment variable, and/or disable the Form Trigger node by adding `n8n-nodes-base.formTrigger` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| WireGuard Portal (or wg-portal) is a web-based configuration portal for WireGuard server management. Prior to version 2.1.3, any authenticated non-admin user can become a full administrator by sending a single PUT request to their own user profile endpoint with `"IsAdmin": true` in the JSON body. After logging out and back in, the session picks up admin privileges from the database. When a user updates their own profile, the server parses the full JSON body into the user model, including the `IsAdmin` boolean field. A function responsible for preserving calculated or protected attributes pins certain fields to their database values (such as base model data, linked peer count, and authentication data), but it does not do this for `IsAdmin`. As a result, whatever value the client sends for `IsAdmin` is written directly to the database. After the exploit, the attacker has full admin access to the WireGuard VPN management portal. The problem was fixed in v2.1.3. The docker images for the tag 'latest' built from the master branch also include the fix. |
| n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
| Fleet is open source device management software. In versions prior to 4.80.1, Fleet generated device lock and wipe PINs using a predictable algorithm based solely on the current Unix timestamp. Because no secret key or additional entropy was used, the resulting PIN could potentially be derived if the approximate time the device was locked is known. Fleet’s device lock and wipe commands generate a 6-digit PIN that is displayed to administrators for unlocking a device. In affected versions, this PIN was deterministically derived from the current timestamp. An attacker with physical possession of a locked device and knowledge of the approximate time the lock command was issued could theoretically predict the correct PIN within a limited search window. However, successful exploitation is constrained by multiple factors: Physical access to the device is required, the approximate lock time must be known, the operating system enforces rate limiting on PIN entry attempts, attempts would need to be spread over, and device wipe operations would typically complete before sufficient attempts could be made. As a result, this issue does not allow remote exploitation, fleet-wide compromise, or bypass of Fleet authentication controls. Version 4.80.1 contains a patch. No known workarounds are available. |
