| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges. |
| Multiple vulnerabilities in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against an interface user. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading an interface user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| Multiple vulnerabilities in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against an interface user. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading an interface user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| Multiple vulnerabilities in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against an interface user. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading an interface user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges. |
| Multiple vulnerabilities in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against an interface user. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading an interface user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| A vulnerability in the web-based management interface of Cisco IOS XE Wireless Controller software for the Catalyst 9000 Family of switches could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by authenticating to the device as a high-privileged user, adding certain configurations with malicious code in one of its fields, and persuading another user to click on it. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or to access sensitive, browser-based information. |
| A vulnerability in a CLI command of Cisco IOS XR Software for the Cisco 8000 Series Routers and Network Convergence System 540 Series Routers running NCS540L software images could allow an authenticated, local attacker to elevate their privilege to root. To exploit this vulnerability, an attacker would need to have a valid account on an affected device. The vulnerability is due to insufficient validation of command line arguments. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the prompt. A successful exploit could allow an attacker with low-level privileges to escalate their privilege level to root. |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco UDLD process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. The attacker needs full control of a directly connected device. That device must be connected over a port channel that has UDLD enabled. To trigger arbitrary code execution, both the UDLD-enabled port channel and specific system conditions must exist. In the absence of either the UDLD-enabled port channel or the system conditions, attempts to exploit this vulnerability will result in a DoS condition. It is possible, but highly unlikely, that an attacker could control the necessary conditions for exploitation. The CVSS score reflects this possibility. However, given the complexity of exploitation, Cisco has assigned a Medium Security Impact Rating (SIR) to this vulnerability. |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities. |
| Multiple vulnerabilities in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to cause the web UI software to become unresponsive and consume vty line instances, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient error handling in the web UI. An attacker could exploit these vulnerabilities by sending crafted HTTP packets to an affected device. A successful exploit could allow the attacker to cause the web UI software to become unresponsive and consume all available vty lines, preventing new session establishment and resulting in a DoS condition. Manual intervention would be required to regain web UI and vty session functionality. Note: These vulnerabilities do not affect the console connection. |
| A vulnerability in the web-based interface of Cisco Webex Meetings could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based interface of the affected service. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of the affected service. An attacker could exploit this vulnerability by persuading a user of the interface to click a maliciously crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| A vulnerability in the web UI of Cisco Umbrella could allow an unauthenticated, remote attacker to negatively affect the performance of this service. The vulnerability exists due to insufficient rate limiting controls in the web UI. An attacker could exploit this vulnerability by sending crafted HTTPS packets at a high and sustained rate. A successful exploit could allow the attacker to negatively affect the performance of the web UI. Cisco has addressed this vulnerability. |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to execute arbitrary code or cause an affected device to restart unexpectedly. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the device to reload, resulting in a denial of service (DoS) condition. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on the affected device. |
