| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger a write out bounds / segmentation fault if the segment ids are not sorted. Code assumes that the segment ids are in increasing order, using the last element of the tensor holding them to determine the dimensionality of output tensor. This results in allocating insufficient memory for the output tensor and in a write outside the bounds of the output array. This usually results in a segmentation fault, but depending on runtime conditions it can provide for a write gadget to be used in future memory corruption-based exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are sorted, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code. |
| In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger a denial of service by causing an out of memory allocation in the implementation of segment sum. Since code uses the last element of the tensor holding them to determine the dimensionality of output tensor, attackers can use a very large value to trigger a large allocation. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to limit the maximum value in the segment ids tensor. This only handles the case when the segment ids are stored statically in the model, but a similar validation could be done if the segment ids are generated at runtime, between inference steps. However, if the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code. |
| In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code. |
| In TensorFlow Lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, saved models in the flatbuffer format use a double indexing scheme: a model has a set of subgraphs, each subgraph has a set of operators and each operator has a set of input/output tensors. The flatbuffer format uses indices for the tensors, indexing into an array of tensors that is owned by the subgraph. This results in a pattern of double array indexing when trying to get the data of each tensor. However, some operators can have some tensors be optional. To handle this scenario, the flatbuffer model uses a negative `-1` value as index for these tensors. This results in special casing during validation at model loading time. Unfortunately, this means that the `-1` index is a valid tensor index for any operator, including those that don't expect optional inputs and including for output tensors. Thus, this allows writing and reading from outside the bounds of heap allocated arrays, although only at a specific offset from the start of these arrays. This results in both read and write gadgets, albeit very limited in scope. The issue is patched in several commits (46d5b0852, 00302787b7, e11f5558, cd31fd0ce, 1970c21, and fff2c83), and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that only operators which accept optional inputs use the `-1` special value and only for the tensors that they expect to be optional. Since this allow-list type approach is erro-prone, we advise upgrading to the patched code. |
| In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, if a TFLite saved model uses the same tensor as both input and output of an operator, then, depending on the operator, we can observe a segmentation fault or just memory corruption. We have patched the issue in d58c96946b and will release patch releases for all versions between 1.15 and 2.3. We recommend users to upgrade to TensorFlow 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, to mimic Python's indexing with negative values, TFLite uses `ResolveAxis` to convert negative values to positive indices. However, the only check that the converted index is now valid is only present in debug builds. If the `DCHECK` does not trigger, then code execution moves ahead with a negative index. This, in turn, results in accessing data out of bounds which results in segfaults and/or data corruption. The issue is patched in commit 2d88f470dea2671b430884260f3626b1fe99830a, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `Shard` API in TensorFlow expects the last argument to be a function taking two `int64` (i.e., `long long`) arguments. However, there are several places in TensorFlow where a lambda taking `int` or `int32` arguments is being used. In these cases, if the amount of work to be parallelized is large enough, integer truncation occurs. Depending on how the two arguments of the lambda are used, this can result in segfaults, read/write outside of heap allocated arrays, stack overflows, or data corruption. The issue is patched in commits 27b417360cbd671ef55915e4bb6bb06af8b8a832 and ca8c013b5e97b1373b3bb1c97ea655e69f31a575, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In Tensorflow before version 2.3.1, the `RaggedCountSparseOutput` implementation does not validate that the input arguments form a valid ragged tensor. In particular, there is no validation that the values in the `splits` tensor generate a valid partitioning of the `values` tensor. Hence, the code is prone to heap buffer overflow. If `split_values` does not end with a value at least `num_values` then the `while` loop condition will trigger a read outside of the bounds of `split_values` once `batch_idx` grows too large. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1. |
| In Tensorflow before version 2.3.1, the `RaggedCountSparseOutput` implementation does not validate that the input arguments form a valid ragged tensor. In particular, there is no validation that the values in the `splits` tensor generate a valid partitioning of the `values` tensor. Thus, the code sets up conditions to cause a heap buffer overflow. A `BatchedMap` is equivalent to a vector where each element is a hashmap. However, if the first element of `splits_values` is not 0, `batch_idx` will never be 1, hence there will be no hashmap at index 0 in `per_batch_counts`. Trying to access that in the user code results in a segmentation fault. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1. |
| In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1. |
| In Helm before versions 2.16.11 and 3.3.2 plugin names are not sanitized properly. As a result, a malicious plugin author could use characters in a plugin name that would result in unexpected behavior, such as duplicating the name of another plugin or spoofing the output to `helm --help`. This issue has been patched in Helm 3.3.2. A possible workaround is to not install untrusted Helm plugins. Examine the `name` field in the `plugin.yaml` file for a plugin, looking for characters outside of the [a-zA-Z0-9._-] range. |
| In Helm before versions 2.16.11 and 3.3.2, a Helm repository can contain duplicates of the same chart, with the last one always used. If a repository is compromised, this lowers the level of access that an attacker needs to inject a bad chart into a repository. To perform this attack, an attacker must have write access to the index file (which can occur during a MITM attack on a non-SSL connection). This issue has been patched in Helm 3.3.2 and 2.16.11. A possible workaround is to manually review the index file in the Helm repository cache before installing software. |
| In Helm before versions 2.16.11 and 3.3.2 there is a bug in which the `alias` field on a `Chart.yaml` is not properly sanitized. This could lead to the injection of unwanted information into a chart. This issue has been patched in Helm 3.3.2 and 2.16.11. A possible workaround is to manually review the `dependencies` field of any untrusted chart, verifying that the `alias` field is either not used, or (if used) does not contain newlines or path characters. |
| SoyCMS 3.0.2 and earlier is affected by Reflected Cross-Site Scripting (XSS) which leads to Remote Code Execution (RCE) from a known vulnerability. This allows remote attackers to force the administrator to edit files once the adminsitrator loads a specially crafted webpage. |
| A flaw was found in the mysql-wsrep component of mariadb. Lack of input sanitization in `wsrep_sst_method` allows for command injection that can be exploited by a remote attacker to execute arbitrary commands on galera cluster nodes. This threatens the system's confidentiality, integrity, and availability. This flaw affects mariadb versions before 10.1.47, before 10.2.34, before 10.3.25, before 10.4.15 and before 10.5.6. |
| The ScratchSig extension for MediaWiki before version 1.0.1 allows stored Cross-Site Scripting. Using <script> tag inside <scratchsig> tag, attackers with edit permission can execute scripts on visitors' browser. With MediaWiki JavaScript API, this can potentially lead to privilege escalation and/or account takeover. This has been patched in release 1.0.1. This has already been deployed to all Scratch Wikis. No workarounds exist other than disabling the extension completely. |
| In PrestaShop contactform module (prestashop/contactform) before version 4.3.0, an attacker is able to inject JavaScript while using the contact form. The `message` field was incorrectly unescaped, possibly allowing attackers to execute arbitrary JavaScript in a victim's browser. |
| In GLPI before version 9.5.2, the `install/install.php` endpoint insecurely stores user input into the database as `url_base` and `url_base_api`. These settings are referenced throughout the application and allow for vulnerabilities like Cross-Site Scripting and Insecure Redirection Since authentication is not required to perform these changes,anyone could point these fields at malicious websites or form input in a way to trigger XSS. Leveraging JavaScript it's possible to steal cookies, perform actions as the user, etc. The issue is patched in version 9.5.2. |
