NXP ENET-QOS Ethernet driver re-arms RX descriptors with a clobbered DMA buffer address on packet drop

The NXP ENET-QOS Ethernet driver's receive work handler eth_nxp_enet_qos_rx() in drivers/ethernet/eth_nxp_enet_qos hands each processed descriptor back to the DMA by writing desc->read.control = rx_desc_refresh_flags, which sets OWN_FLAG and BUF1_ADDR_VALID_FLAG. RDES0 of a receive descriptor is the DMA buffer address in read format, but the hardware write-back aliases that word with the VLAN tag fields (or, for a context descriptor, the timestamp low word), so it is destroyed on every completion. The success path rewrites desc->read.buf1_addr before re-arming; the four drop paths — errored or non-first descriptor, net_pkt_rx_alloc() failure, invalid descriptor length, and net_pkt_get_frag() failure — did not, re-arming the ring slot with the write-back residue as its DMA target address. The drop paths are driven entirely by received traffic and need no privilege or special configuration. With the defaults for this driver (CONFIG_NET_BUF_DATA_SIZE of 128 and 16 receive descriptors) a single full-size frame consumes twelve ring slots and twelve K_NO_WAIT fragment allocations, so a short burst of frames sent to the device exhausts the receive pools and reaches the allocation-failure paths; a frame with a receive error, or any frame whose first descriptor was already dropped, reaches the non-first-descriptor path. Once a slot has been poisoned, the DMA writes the next frame received in that slot to an address derived from the frame's VLAN tag fields rather than to a receive buffer. On the supported MCX SoCs that address falls in flash or reserved space, so the transfer raises a fatal bus error that the driver only logs — there is no reset or recovery path — and reception stops permanently until the device is rebooted; where the write is silently discarded instead, the untouched buffer is later handed to the network stack with a length, delivering stale buffer contents as if they were a received frame. A single triggering event is enough to make the condition persistent, so an attacker able to send traffic to the device can permanently disable its network interface.

Ettercap through 0.8.4.1 Out-of-Bounds Read via HTTP NTLM Authentication Parsing

Ettercap through 0.8.4.1 contains an out-of-bounds read vulnerability in Parse_NTLM_Auth() in src/dissectors/ec_http.c due to unvalidated NTLM message offsets. Attackers can send a crafted HTTP Authorization header observed by Ettercap to read beyond the buffer, disclosing memory or crashing the process.

Ettercap through 0.8.4.1 Heap Out-of-Bounds Read via TLS SNI Parsing

Ettercap through 0.8.4.1 contains a heap out-of-bounds read vulnerability in sslw_get_clienthello_sni() in src/ec_sslwrap.c that trusts the unchecked 16-bit SNI length field. Network-adjacent attackers can send crafted TLS ClientHello messages during SSL interception to leak up to 64 KB of heap memory upstream or crash Ettercap.

Group-Office before 6.8.181, 25.0.116, and 26.0.58 Local File Read via processUploadQueue

Group-Office before 6.8.181, 25.0.116, and 26.0.58 contains an arbitrary local file read vulnerability in FolderController::actionProcessUploadQueue that allows authenticated users to read server files by supplying absolute paths in the blobs parameter. Attackers can have files hard-linked or copied into their own folder and downloaded, exposing other users' stored files and config.php database credentials.

Group-Office before 6.8.181, 25.0.116, and 26.0.58 Stored XSS via filterXSS Bypass

Intermesh Group-Office before 6.8.181, 25.0.116, and 26.0.58 contains a stored cross-site scripting vulnerability in the email viewer due to a flawed regex in StringHelper::filterXSS. Remote attackers can send emails containing tags like svg/onload, which MessagePanel.js renders raw, executing script in the recipient's session when opened.

Munin munin-httpd through 2.999.18 Path Traversal via Static File Handler

Munin munin-httpd 2.99.1 through 2.999.18 contains a path traversal vulnerability in the static file handler of Munin::Master::HTML::handle_request that allows unauthenticated attackers to read files outside the static directory. Attackers can request /static/../<file> to bypass the '/../' substring check and read munin.conf and plugin-conf.d files containing monitored service credentials.

Local Privilege Escalation via Background Activity Launch in Android AppTimeTracker

In deliverResult of AppTimeTracker.java, there is a possible background activity launch due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In _mupdf_get_hdr of wprint_mupdf.c, there is a possible out-of-bounds read due to an integer overflow. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.

Android Permission Bypass Enables Local Privilege Escalation

In multiple locations, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple locations, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Keycloak-services: keycloak-services: protocol mapper with jsontype=json bypasses token sanitization

A flaw was found in the token sanitization logic of Keycloak, an open source identity and access management solution. The issue occurs when a protocol mapper is configured to emit structured claims using the JSON type. The security check designed to remove unauthorized role mappings only looks for standard Java maps and fails to recognize Jackson based JSON objects. This allows an attacker to inject forged client roles into security tokens, which could lead to unauthorized access to protected resources.

Keycloak-services: keycloak-services: unverified idp email auto-linking enables account takeover

A flaw was found in the idp-auto-link authenticator of the keycloak-services component, which handles user identity federation. The issue occurs when Keycloak automatically links an incoming identity from an external provider to an existing local account based on an email address without verifying if the provider has validated that email. This can allow an attacker to take over a victim's account by using a matching unverified email address at a brokered provider.

Keycloak-services: keycloak-services: saml broker accepts holder-of-key assertions without proof of key possession

A flaw was found in the SAML identity broker component of Keycloak, which is used to delegate authentication to external identity providers. The issue occurs because the broker fails to verify that a user actually possesses the private key associated with a holder-of-key assertion. An attacker who intercepts a victim signed assertion can replay it to gain unauthorized access and impersonate the victim without needing their private key.

FreeScout: Conversation Merge Cross-Mailbox Authorization Bypass

FreeScout is a self-hosted help desk and shared mailbox. Prior to 1.8.227, the conversation_merge action records a failed authorization check for the target conversation in response['msg'] and then clears that value inside the source-conversation loop. An authenticated agent can merge a conversation they control into a target conversation in a mailbox they cannot access. The operation injects threads, attachments, and audit records into the unauthorized target and deletes the source conversation, but it does not disclose the target's existing contents. This issue is fixed in version 1.8.227.

Chartbrew: Arbitrary file deletion as root via data connection SSL/SSH paths

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. Prior to 5.2.3, connection creation or update stored attacker-chosen absolute SSL and SSH file paths, and later connection cleanup passed those stored paths to fs.unlink without a path restriction. The vulnerable surface is data-connection certificate and SSH-key cleanup when a connection is removed. A user with createOwn and deleteOwn permissions on their own team stores a target path in a connection and then deletes the connection to trigger cleanup; default self-signup grants teamOwner these permissions. The cleanup routine treats the stored SSL or SSH path as a managed certificate path and unlinks the referenced file; duplicateConnection provides a second advisory-identified trigger. The attacker must be able to create or update and then delete a connection on their own team. The default container runs Chartbrew as uid 0, while deployments with a less-privileged process are limited by that process's deletion permissions. The attacker can delete files such as /code/.env or application source, causing integrity loss and service disruption. This issue is fixed in version 5.2.3.

Chartbrew: Full account takeover via JWTs accepted under default CB_SECRET

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. Prior to 5.2.3, four authentication helpers accepted session tokens signed with CB_SECRET, including known, weak, or shipped-default values. The vulnerable surface is session JWT fallback in server/modules/verifyToken.js, verifyUser.js, getUserFromToken.js, and socketManager.js across the API and socket layer. A stock source or repository Docker Compose deployment retains a known, weak, or default CB_SECRET and an attacker submits a forged HS256 token decoding to a target user id. Knowing the symmetric secret lets the attacker create a token that the legacy verification fallback accepts as the target user without that user's password or two-factor authentication. The condition includes stock source and repository Docker Compose installs and any otherwise known or weak CB_SECRET; a bare container where CB_SECRET is undefined is not affected by this fallback path. A forged session impersonates the chosen user across the entire API and socket layer and exercises that user's Chartbrew privileges. This issue is fixed in version 5.2.3.

Code Graph RAG: MCP paginated read_file path traversal / arbitrary file read

Code Graph RAG is an AI-powered knowledge graph and retrieval system for querying, understanding, and editing multi-language codebases. Prior to 0.0.345, the MCPToolsRegistry.read_file implementation in codebase_rag/mcp/tools.py joins attacker-controlled file_path input to project_root without resolving and verifying containment when offset or limit selects the paginated branch. An absolute path causes pathlib to discard the configured root, while relative traversal can also resolve outside it. The protected non-paginated branch uses validate_project_path, but the paginated branch bypasses that validation before opening the path. An unauthenticated caller of a network-exposed HTTP MCP server can therefore read arbitrary UTF-8-readable files available to the server process, including credentials, environment data, private keys, source, and configuration; local callers through the stdio transport can reach the same vulnerable code path. This issue is fixed in version 0.0.345.

ASN1SCC: Out-of-bounds read via unvalidated character index in ASN.1 string decoders

ASN1SCC is an open source ASN.1 compiler for embedded systems. Prior to 4.7.0.1, the ACN runtime function Acn_Dec_String_CharIndex_private in asn1crt/asn1crt_encoding_acn.c and the generated uPER decoder InternalItem_string_with_alpha_decode in StgC/uper_c.stg do not validate a decoded character index before reading allowedCharSet. For string alphabets whose size is not a power of two, a crafted message can select an unused encoded index, read a small bounded window of adjacent static program constants, and return the byte as a successfully decoded character. The full 128-character IA5String alphabet is not affected. This issue is fixed in version 4.7.0.1.

HomeBox: Stored XSS via `javascript:` URI in Custom Entity Fields

HomeBox is a home inventory and organization system. Prior to 0.27.0, the maybeUrl() utility accepts markdown-style links in entity custom-field values without restricting the URL scheme, so an authenticated user can store a javascript: URI that is rendered as a clickable anchor on an item page. When another authenticated user clicks the link, attacker-controlled JavaScript executes in the victim's HomeBox origin, enabling session theft, account takeover, or data exfiltration. This issue is fixed in version 0.27.0.

ModSecurity: Response Body Inspection Bypass

ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. From 3.0.0 until 3.0.17, src/transaction.cc compares a response Content-Type value against SecResponseBodyMimeType entries case-sensitively. A mixed-case response media type that is semantically equivalent to a configured lowercase type can therefore be treated as unconfigured, causing ModSecurity to skip RESPONSE_BODY inspection. An unauthenticated requester can then receive response content that a phase 4 rule would otherwise block, including sensitive error or debug data. This issue is fixed in version 3.0.17.