| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_resume
There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't allow the same type rq_qos add more than once
In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.
The reason can be described as follows:
cpu 0 cpu 1
ioc_qos_write ioc_qos_write
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
...
rq_qos_add(q, rqos);
...
}
When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.
And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: fix potential memory leak in damon_reclaim_init()
damon_reclaim_init() allocates a memory chunk for ctx with
damon_new_ctx(). When damon_select_ops() fails, ctx is not released,
which will lead to a memory leak.
We should release the ctx with damon_destroy_ctx() when damon_select_ops()
fails to fix the memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: ensure pages are unlocked on cow_file_range() failure
There is a hung_task report on zoned btrfs like below.
https://github.com/naota/linux/issues/59
[726.328648] INFO: task rocksdb:high0:11085 blocked for more than 241 seconds.
[726.329839] Not tainted 5.16.0-rc1+ #1
[726.330484] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[726.331603] task:rocksdb:high0 state:D stack: 0 pid:11085 ppid: 11082 flags:0x00000000
[726.331608] Call Trace:
[726.331611] <TASK>
[726.331614] __schedule+0x2e5/0x9d0
[726.331622] schedule+0x58/0xd0
[726.331626] io_schedule+0x3f/0x70
[726.331629] __folio_lock+0x125/0x200
[726.331634] ? find_get_entries+0x1bc/0x240
[726.331638] ? filemap_invalidate_unlock_two+0x40/0x40
[726.331642] truncate_inode_pages_range+0x5b2/0x770
[726.331649] truncate_inode_pages_final+0x44/0x50
[726.331653] btrfs_evict_inode+0x67/0x480
[726.331658] evict+0xd0/0x180
[726.331661] iput+0x13f/0x200
[726.331664] do_unlinkat+0x1c0/0x2b0
[726.331668] __x64_sys_unlink+0x23/0x30
[726.331670] do_syscall_64+0x3b/0xc0
[726.331674] entry_SYSCALL_64_after_hwframe+0x44/0xae
[726.331677] RIP: 0033:0x7fb9490a171b
[726.331681] RSP: 002b:00007fb943ffac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000057
[726.331684] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb9490a171b
[726.331686] RDX: 00007fb943ffb040 RSI: 000055a6bbe6ec20 RDI: 00007fb94400d300
[726.331687] RBP: 00007fb943ffad00 R08: 0000000000000000 R09: 0000000000000000
[726.331688] R10: 0000000000000031 R11: 0000000000000246 R12: 00007fb943ffb000
[726.331690] R13: 00007fb943ffb040 R14: 0000000000000000 R15: 00007fb943ffd260
[726.331693] </TASK>
While we debug the issue, we found running fstests generic/551 on 5GB
non-zoned null_blk device in the emulated zoned mode also had a
similar hung issue.
Also, we can reproduce the same symptom with an error injected
cow_file_range() setup.
The hang occurs when cow_file_range() fails in the middle of
allocation. cow_file_range() called from do_allocation_zoned() can
split the give region ([start, end]) for allocation depending on
current block group usages. When btrfs can allocate bytes for one part
of the split regions but fails for the other region (e.g. because of
-ENOSPC), we return the error leaving the pages in the succeeded regions
locked. Technically, this occurs only when @unlock == 0. Otherwise, we
unlock the pages in an allocated region after creating an ordered
extent.
Considering the callers of cow_file_range(unlock=0) won't write out
the pages, we can unlock the pages on error exit from
cow_file_range(). So, we can ensure all the pages except @locked_page
are unlocked on error case.
In summary, cow_file_range now behaves like this:
- page_started == 1 (return value)
- All the pages are unlocked. IO is started.
- unlock == 1
- All the pages except @locked_page are unlocked in any case
- unlock == 0
- On success, all the pages are locked for writing out them
- On failure, all the pages except @locked_page are unlocked |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size
On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.
The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.
The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).
[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166] <TASK>
[75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520] ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431] ? memcpy+0x4e/0x60
[75721.781931] split_leaf+0x433/0x12d0 [btrfs]
[75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300] ? lock_downgrade+0x7c0/0x7c0
[75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313] ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085] ? lock_release+0x552/0xf80
[75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886] ? __kasan_check_write+0x14/0x20
[75721.895152] ? do_raw_read_unlock+0x44/0x80
[75721.901323] ? _raw_write_lock_irq+0x60/0x80
[75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166] ? _raw_write_unlock+0x23/0x40
[75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906] ? try_to_wake_up+0x30/0x14a0
[75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661] ? rcu
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
locking/csd_lock: Change csdlock_debug from early_param to __setup
The csdlock_debug kernel-boot parameter is parsed by the
early_param() function csdlock_debug(). If set, csdlock_debug()
invokes static_branch_enable() to enable csd_lock_wait feature, which
triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and
CONFIG_SPARSEMEM_VMEMMAP=n.
With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in
static_key_enable() and returns NULL, resulting in a NULL dereference
because mem_section is initialized only later in sparse_init().
This is also a problem for powerpc because early_param() functions
are invoked earlier than jump_label_init(), also resulting in
static_key_enable() failures. These failures cause the warning "static
key 'xxx' used before call to jump_label_init()".
Thus, early_param is too early for csd_lock_wait to run
static_branch_enable(), so changes it to __setup to fix these. |
| A buffer overflow vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `global.so` binary. The `getSaveConfig` function retrieves the `http_host` parameter from user input via `websGetVar` and copies it into a fixed-size stack buffer (`v13`) using `strcpy()` without performing any length checks. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted HTTP request to the router's web interface, potentially leading to arbitrary code execution. |
| A command injection vulnerability exists in the TOTOLINK A950RG Router firmware V5.9c.4592_B20191022_ALL within the `system.so` binary. The `setDiagnosisCfg` function retrieves the `ipDoamin` parameter from user input via `websGetVar` and concatenates it directly into a `ping` system command executed via `CsteSystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (Windows client deployments) contain a registry key that can be enabled by administrators, causing the client to skip SSL/TLS certificate validation. An attacker who can intercept HTTPS traffic can then inject malicious driver DLLs, resulting in remote code execution with SYSTEM privileges; a local attacker can achieve local privilege escalation via a junction‑point DLL injection. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain two hardcoded private keys that are shipped in the application containers (printerlogic/pi, printerlogic/printer-admin-api, and printercloud/pi). The keys are stored in clear text under /var/www/app/config/ as keyfile.ppk.dev and keyfile.saasid.ppk.dev. The application uses these keys as the symmetric secret for AES‑256‑CBC encryption/decryption of the “SaaS Id” (external identifier) through the getEncryptedExternalId() / getDecryptedExternalId() methods. Because the secret is embedded in the deployed image, any attacker who can obtain a copy of the Docker image, read the configuration files, or otherwise enumerate the filesystem can recover the encryption key. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a protection mechanism failure vulnerability within the file_get_contents() function. When an administrator configures a printer’s hostname (or similar callback field), the value is passed unchecked to PHP’s file_get_contents()/cURL functions, which follow redirects and impose no allow‑list, scheme, or IP‑range restrictions. An admin‑level attacker can therefore point the hostname to a malicious web server that issues a 301 redirect to internal endpoints such as the AWS EC2 metadata service. The server follows the redirect, retrieves the metadata, and returns or stores the credentials, enabling the attacker to steal cloud IAM keys, enumerate internal services, and pivot further into the SaaS infrastructure. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/lexmark/dellCheck.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind and non-blind server-side request forgery (SSRF) vulnerability. The '/var/www/app/console_release/hp/badgeSetup.php' script is reachable from the Internet without any authentication and builds URLs from user‑controlled parameters before invoking either the custom processCurl() function or PHP’s file_get_contents(); in both cases the hostname/URL is taken directly from the request with no whitelist, scheme restriction, IP‑range validation, or outbound‑network filtering. Consequently, any unauthenticated attacker can force the server to issue arbitrary HTTP requests to internal resources. This enables internal network reconnaissance, credential leakage, pivoting, and data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/log_off_single_sign_on.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a blind server-side request forgery (SSRF) vulnerability reachable via the /var/www/app/console_release/hp/installApp.php script that can be exploited by an unauthenticated user. When a printer is registered, the software stores the printer’s host name in the variable $printer_vo->str_host_address. The code later builds a URL like 'http://<host‑address>:80/DevMgmt/DiscoveryTree.xml' and sends the request with curl. No validation, whitelist, or private‑network filtering is performed before the request is made. Because the request is blind, an attacker cannot see the data directly, but can still: probe internal services, trigger internal actions, or gather other intelligence. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a server-side request forgery (SSRF) vulnerability. The `/var/www/app/console_release/lexmark/update.php` script is reachable from the internet without any authentication. The PHP script builds URLs from user‑controlled values and then invokes either 'curl_exec()` or `file_get_contents()` without proper validation. Because the endpoint is unauthenticated, any remote attacker can supply a hostname and cause the server to issue requests to internal resources. This enables internal network reconnaissance, potential pivoting, or data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.1.102 and Application prior to version 25.1.1413 (VA/SaaS deployments) contain a server-side request forgery (SSRF) vulnerability. The `console_release` directory is reachable from the internet without any authentication. Inside that directory are dozens of PHP scripts that build URLs from user‑controlled values and then invoke either 'curl_exec()` or `file_get_contents()` without proper validation. Although many files attempt to mitigate SSRF by calling `filter_var', the checks are incomplete. Because the endpoint is unauthenticated, any remote attacker can supply a hostname and cause the server to issue requests to internal resources. This enables internal network reconnaissance, potential pivoting, or data exfiltration. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) expose a set of PHP scripts under the `console_release` directory without requiring authentication. An unauthenticated remote attacker can invoke these endpoints to re‑configure networked printers, add or delete RFID badge devices, or otherwise modify device settings. This vulnerability has been identified by the vendor as: V-2024-029 — No Authentication to Modify Devices. |
| Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1049 and Application prior to version 20.0.2786 (VA/SaaS deployments) contain a default admin account and an installation‑time endpoint at `/admin/query/update_database.php` that can be accessed without authentication. An attacker who can reach the installation web interface can POST arbitrary `root_user` and `root_password` values, causing the script to replace the default admin credentials with attacker‑controlled ones. The script also contains hard‑coded SHA‑512 and SHA‑1 hashes of the default password, allowing the attacker to bypass password‑policy validation. As a result, an unauthenticated remote attacker can obtain full administrative control of the system during the initial setup. This vulnerability has been identified by the vendor as: V-2024-022 — Insecure Installation Credentials. |
