| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An insufficient entropy vulnerability in login logic in Synology DiskStation Manager (DSM) before 7.2.1-69057-12, 7.2.2-72806-9, 7.3.2-86009-4 and 7.4-90075 allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks. |
| HCL BigFix Service Management is affected by a Security Misconfiguration vulnerability, which could allow an authenticated attacker to exploit improper access controls, enabling the unauthorized viewing of restricted data elements across tenant boundaries. |
| An improper encoding or escaping of output vulnerability in SCGI in Synology DiskStation Manager (DSM) before 7.2.1-69057-12, 7.2.2-72806-9, 7.3.2-86009-4 and 7.4-90075 allows remote attackers to read or write arbitrary files and conduct denial-of-service attacks. |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: sunxi-cir: Unregister rc device on probe failure
After rc_register_device() succeeds, later probe failures must undo the
registration with rc_unregister_device(). The current error path jumps to
the allocation cleanup label and only calls rc_free_device(), leaving the
rc device registration and resources created by rc_register_device()
behind.
Add a registered-device unwind label for the IRQ lookup, IRQ request, and
hardware initialization failure paths. Keep rc_free_device() for failures
before rc_register_device() succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Always flush vpid02 on first use
Make sure vpid02 is always flushed on first use by setting last_vpid=0
when allocating vpid02. nested_vmx_transition_tlb_flush() will always
detect a VPID change on first VM-Enter after VMXON, because VPID=0 in
vmcs12 is not allowed if L1 enables VPID.
This avoids using stale TLB entries from a previous lifetime of the
VPID, that might have been associated with a different vCPU (or a
completely different VM).
Note that last_vpid is already being initialized as 0 when the vCPU is
created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the
problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM
happens to reuse a VPID that has TLB entries on the physical CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Tie IIO dma fence lock lifetime to the fence
The `iio_dma_fence` implementation currently uses a lock embedded in the
`iio_dmabuf_priv`. But the `iio_dma_fence` can outlive the
`iio_dmabuf_priv`, which can cause a use-after-free.
Tie the lifetime of the lock to the lifetime of the fence by embedding them
in the same struct.
We can't just hold a reference to the `iio_dmabuf_priv` from the
`iio_dma_fence` since `iio_buffer_dmabuf_release()` might sleep and the
fence release callback is not allowed to sleep.
Note that the `dma_fence` framework now has an internal lock that gets used
when the passing `NULL` for `lock` in `dma_fence_init()`, but in order to
allow this patch to be backportable use an external lock. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Make IIO DMA fence release RCU-safe
The `dma_fence` documentation states that if a custom release
implementation is provided, the `dma_fence` object must be freed in an
RCU-safe way. The current `iio_dma_fence` implementation uses `kfree()`,
which might result in a use-after-free.
Remove the custom `release` implementation. This makes the DMA fence core
fall back to `dma_fence_free()`, which calls `kfree_rcu()` on the fence.
This requires that the fence be the first member of `struct iio_dma_fence`.
Using the default release method for extended DMA fence structures is a
common pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: hdac_hda: Fix hlink refcount leak on component registration failure
hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get()
before registering the ASoC component. If component registration fails,
the function returns without dropping the link reference.
Always call snd_hdac_ext_bus_link_put() after the registration attempt so
the reference taken during probe is balanced on both success and failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: cs35l34: drain threaded IRQ before runtime suspend
cs35l34_runtime_suspend() currently switches the codec into
regcache_cache_only(true), asserts reset low, and powers the device off
without first quiescing the threaded IRQ registered by
devm_request_threaded_irq(). That leaves a window where
cs35l34_irq_thread() can still run after suspend has removed live
hardware access.
A running system can reach this during runtime PM while the driver still
has critical fault IRQs unmasked. If the threaded handler runs in that
window, it reads volatile INT_STATUS_1..4 after cache_only has been
enabled, ignores the regmap_read() failures, and can still execute the
PROT_RELEASE_CTL release sequence or the BST fault power-down writes.
Use disable_irq() before entering cache_only/reset-low/power-off so any
in-flight threaded handler is drained and no new IRQ thread can run
while the device is suspended. Re-enable the IRQ only after
runtime_resume() has restored live register access with regcache_sync().
Since probe only logs request_threaded_irq() failures and keeps going,
track whether the IRQ was actually installed before disabling or
re-enabling it. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: afs: validate v2 image info bounds
The AFS v2 parser uses footer[8] to locate the image information block
inside the current erase block, then uses the image information
region_count to walk entries from a fixed local array. The footer offset
and region count come from flash contents and are not checked against the
erase block or the local image-info array before use.
Reject v2 entries whose image information offset would underflow the
erase block calculation, and reject region counts that cannot fit in the
local image-info array before walking region entries. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: harmony: initialize locks before requesting IRQ
snd_harmony_create() registers the IRQ before initializing h->lock and
h->mixer_lock. A pending interrupt can invoke the handler while these
locks are uninitialized.
Initialize both locks before requesting the IRQ so the handler always
sees valid lock state. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mux: Fix channel node leak on adapter add failure
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: tracing: no ptr dereference during log output
The fsl edma events store a pointer to a struct fsl_edma_engine in the
ringbuffer and dereference it when a log entry is printed. At this time,
the pointer may no longer be valid.
Event injection can be used to trigger a crash:
$ cd /sys/kernel/tracing
$ echo 'value = 0' > events/fsl_edma/edma_writeb/inject
$ cat trace
The log output needs only edma->membase. Add a membase field at the end
of the event and use the new field for log output. Keep the existing
fields for backward compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix resume-vs-remove race
If the user issues the resume ioctl and the remove ioctl at the same
time, it may be possible that the device is resumed after it is suspended
in __dm_destroy. The result is that the table is destroyed without
calling the postsuspend method.
Dm targets expect that they may be removed only after the postsuspend
method method was called. If we break this expectation, it can cause
misbehavior in various targets. For example - in the dm-integrity target,
the reboot notifier is not unregistered, leading to use-after-free.
Fix this bug by refusing to resume if the device is being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: fix lost bounce buffers on TDs spanning several ring segments
When a TD reaches a link TRB with data that is not aligned to the
endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail
through the bounce buffer of the ring segment holding that link TRB.
xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers,
copies the data back into the URB's buffer.
The enqueue path records the segment that was bounced in td->bounce_seg,
under the assumption that a TD never spans more than two ring segments.
That assumption does not hold: a TD large enough to span three or more
segments crosses several link TRBs and can be bounced at each of them.
Only the last one survives in td->bounce_seg, so every earlier bounce
buffer is neither copied back nor DMA unmapped.
The URB still completes with actual_length equal to the requested length
and no error, so the transfer looks successful while a wMaxPacketSize
sized hole in the destination buffer silently keeps its previous
contents. It also leaks a DMA mapping per dropped bounce.
Any sufficiently large and fragmented bulk transfer can hit this. It was
found with a USB mass storage device behind xHCI backing a dm-verity
target with 512 byte hash blocks, where the stale data is detected rather
than silently consumed. The device enumerates as SuperSpeed, so
wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash
block. verity_prefetch_io() makes the block layer merge hundreds of them
into a single request of up to 512 scatterlist entries of 512 bytes each.
At 256 TRBs per ring segment such a TD spans three segments, and every
segment boundary falls on an odd multiple of 512, i.e. unaligned to
wMaxPacketSize. dm-bufio then caches a hash block holding stale data and
dm-verity declares the metadata block corrupted:
device-mapper: verity: 8:2: metadata block 10850 is corrupted
A reproducer running this under qemu is available at
https://github.com/baloo/xhci-verity
The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs)
already lives on the ring segment, so there is nothing extra to track.
Keep recording the last bounced segment in td->bounce_seg and, on
completion, walk the segments from td->start_seg up to it, unmapping
every segment that still has a pending bounce.
Stopping at td->bounce_seg rather than td->end_seg matters: a bounce
implies the TD continues past that segment's link TRB, so bounce_seg is
always strictly before end_seg, and a later TD may already have started
in end_seg and been bounced there. Walking that far would copy a foreign
bounce buffer into this URB and unmap it twice. It also keeps the walk
correct if a TD ever wraps the whole ring so that end_seg == start_seg.
[mn: Add ring->num_segs check to prevent unlikely infinite for loop.] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: hd3ss3220: track VBUS enable state per consumer
regulator_is_enabled() reports the aggregate regulator state, not
whether this consumer holds an enable reference. If another consumer
enables VBUS first, the driver can skip its own regulator_enable() call
and later attempt to drop a reference it never acquired, triggering an
unbalanced regulator disable warning.
Track successful enable and disable calls locally. Keep the state
unchanged when an operation fails so a later role or ID notification
retries the operation while this consumer keeps balanced references. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in KA Informatics Technologies Ltd. Co. Bar Association Website allows Reflected XSS.
This issue affects Bar Association Website: through 18092026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field on every URB completion:
offset = lines_completed * (dev->width << 1) + ...;
if (dma_q->current_field == 2)
offset += dev->width * 2 * dma_q->lines_per_field;
memcpy(plane + offset, p_buffer, lencopy);
Because the VBI node shares video_ioctl_ops with the video node, an
application can size a small VBI plane (REQBUFS/QBUF with a small width,
or with the NTSC standard), then enlarge dev->width (or switch dev->norm
to PAL) through the video node while the VBI stream is running -- the
change is allowed because only dev->vidq is checked -- and let the device
deliver a field-2 VBI payload. cx231xx_do_vbi_copy() now computes the
offset with the larger geometry and memcpy()s past the end of the smaller
plane that was already allocated, a heap out-of-bounds write whose offset
is attacker-chosen and whose contents come from the device. The
per-field guard in cx231xx_copy_vbi_line() does not help: it bounds the
copy against the latched lines_per_field, not the plane's real capacity,
and vb2 does not re-run buf_prepare() for an already prepared buffer.
Refuse the format/standard change when the VBI queue is busy as well, so
the geometry cannot change underneath an allocated VBI buffer. |
