| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An arbitrary file upload vulnerability in the subtitle loading function of asbplayer v1.13.0 allows attackers to execute arbitrary code via uploading a crafted subtitle file. |
| An issue in OpenFUN Richie (LMS) in src/richie/apps/courses/api.py. The application used the non-constant time == operator for HMAC signature verification in the sync_course_run_from_request function. This allows remote attackers to forge valid signatures and bypass authentication by measuring response time discrepancies |
| VMware Aria Operations contains a command injection vulnerability. A malicious unauthenticated actor may exploit this issue to execute arbitrary commands which may lead to remote code execution in VMware Aria Operations while support-assisted product migration is in progress.
To remediate CVE-2026-22719, apply the patches listed in the 'Fixed Version' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001
Workarounds for CVE-2026-22719 are documented in the 'Workarounds' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001 |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in the On-Box Anomaly detection framework of Juniper Networks Junos OS Evolved on PTX Series allows an unauthenticated, network-based attacker to execute code as root.
The On-Box Anomaly detection framework should only be reachable by other internal processes over the internal routing instance, but not over an externally exposed port. With the ability to access and manipulate the service to execute code as root a remote attacker can take complete control of the device.
Please note that this service is enabled by default as no specific configuration is required.
This issue affects Junos OS Evolved on PTX Series:
* 25.4 versions before 25.4R1-S1-EVO, 25.4R2-EVO.
This issue does not affect Junos OS Evolved versions before 25.4R1-EVO.
This issue does not affect Junos OS. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could exploit a vulnerability in the JavaScript Task Runner sandbox to execute arbitrary code outside the sandbox boundary. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to limit the blast radius. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only., and/or disable the Code node by adding `n8n-nodes-base.code` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| The WebSocket backend uses charging station identifiers to uniquely
associate sessions but allows multiple endpoints to connect using the
same session identifier. This implementation results in predictable
session identifiers and enables session hijacking or shadowing, where
the most recent connection displaces the legitimate charging station and
receives backend commands intended for that station. This vulnerability
may allow unauthorized users to authenticate as other users or enable a
malicious actor to cause a denial-of-service condition by overwhelming
the backend with valid session requests. |
| A vulnerability was found in go2ismail Asp.Net-Core-Inventory-Order-Management-System up to 9.20250118. Affected by this vulnerability is an unknown functionality of the file /api/Security/ of the component Security API. Performing a manipulation results in improper authorization. Remote exploitation of the attack is possible. The vendor was contacted early about this disclosure but did not respond in any way. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, fail-open access control in Data Explorer plugin allows any authenticated user to execute SQL queries that have no explicit group assignments, including built-in system queries. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. As a workaround, either explicitly set group permissions on each Data Explorer query that doesn't have permissions, or disable discourse-data-explorer plugin. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, an improper authorization check in the topic management logic allows authenticated users to modify privileged attributes of their topics. By manipulating specific parameters in a PUT or POST request, a regular user can elevate a topic’s status to a site-wide notice or banner, bypassing intended administrative restrictions. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. There are no practical workarounds to prevent this behavior other than applying the security patch. Administrators concerned about unauthorized promotions should audit recent changes to site banners and global notices until the fix is deployed. |
| Discourse is an open source discussion platform. Prior to versions 2025.12.2, 2026.1.1, and 2026.2.0, TL4 users can publish topics into staff-only categories via the `publish_to_category` topic timer, bypassing authorization checks. Versions 2025.12.2, 2026.1.1, and 2026.2.0 patch the issue. No known workarounds are available. |
| The WebSocket backend uses charging station identifiers to uniquely
associate sessions but allows multiple endpoints to connect using the
same session identifier. This implementation results in predictable
session identifiers and enables session hijacking or shadowing, where
the most recent connection displaces the legitimate charging station and
receives backend commands intended for that station. This vulnerability
may allow unauthorized users to authenticate as other users or enable a
malicious actor to cause a denial-of-service condition by overwhelming
the backend with valid session requests. |
| The WebSocket backend uses charging station identifiers to uniquely
associate sessions but allows multiple endpoints to connect using the
same session identifier. This implementation results in predictable
session identifiers and enables session hijacking or shadowing, where
the most recent connection displaces the legitimate charging station and
receives backend commands intended for that station. This vulnerability
may allow unauthorized users to authenticate as other users or enable a
malicious actor to cause a denial-of-service condition by overwhelming
the backend with valid session requests. |
| WebSocket endpoints lack proper authentication mechanisms, enabling
attackers to perform unauthorized station impersonation and manipulate
data sent to the backend. An unauthenticated attacker can connect to the
OCPP WebSocket endpoint using a known or discovered charging station
identifier, then issue or receive OCPP commands as a legitimate charger.
Given that no authentication is required, this can lead to privilege
escalation, unauthorized control of charging infrastructure, and
corruption of charging network data reported to the backend. |
| WebSocket endpoints lack proper authentication mechanisms, enabling
attackers to perform unauthorized station impersonation and manipulate
data sent to the backend. An unauthenticated attacker can connect to the
OCPP WebSocket endpoint using a known or discovered charging station
identifier, then issue or receive OCPP commands as a legitimate charger.
Given that no authentication is required, this can lead to privilege
escalation, unauthorized control of charging infrastructure, and
corruption of charging network data reported to the backend. |
| A flaw was found in the FTP GVfs backend. A malicious FTP server can exploit this vulnerability by providing an arbitrary IP address and port in its passive mode (PASV) response. The client unconditionally trusts this information and attempts to connect to the specified endpoint, allowing the malicious server to probe for open ports accessible from the client's network. |
| A flaw was found in the FTP GVfs backend. A remote attacker could exploit this input validation vulnerability by supplying specially crafted file paths containing carriage return and line feed (CRLF) sequences. These unsanitized sequences allow the attacker to terminate intended FTP commands and inject arbitrary FTP commands, potentially leading to arbitrary code execution or other severe impacts. |
| wger is a free, open-source workout and fitness manager. In versions up to and including 2.4, `RepetitionsConfigViewSet` and `MaxRepetitionsConfigViewSet` return all users' repetition config data because their `get_queryset()` calls `.all()` instead of filtering by the authenticated user. Any registered user can enumerate every other user's workout structure. Commit 1fda5690b35706bb137850c8a084ec6a13317b64 contains a fix for the issue. |
| wger is a free, open-source workout and fitness manager. Five routine detail action endpoints check a cache before calling `self.get_object()`. In versions up to and including 2.4, ache keys are scoped only by `pk` — no user ID is included. When a victim has previously accessed their routine via the API, an attacker can retrieve the cached response for the same PK without any ownership check. Commit e964328784e2ee2830a1991d69fadbce86ac9fbf contains a patch for the issue. |
