| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An unauthorized access vulnerability exists in the Xiaomi Mi Connect Service APP. The vulnerability is caused by the validation logic is flawed and can be exploited by attackers to Unauthorized access to the victim’s device. |
| A vulnerability in Okta Verify for iOS versions 9.25.1 (beta) and 9.27.0 (including beta) allows push notification responses through the iOS ContextExtension feature allowing the authentication to proceed regardless of the user’s selection. When a user long-presses the notification banner and selects an option, both options allow the authentication to succeed.
The ContextExtension feature is one of several push mechanisms available when using Okta Verify Push on iOS devices. The vulnerable flows include:
* When a user is presented with a notification on a locked screen, the user presses on the notification directly and selects their reply without unlocking the device;
* When a user is presented with a notification on the home screen and drags the notification down and selects their reply;
* When an Apple Watch is used to reply directly to a notification.
A pre-condition for this vulnerability is that the user must have enrolled in Okta Verify while the Okta customer was using Okta Classic. This applies irrespective of whether the organization has since upgraded to Okta Identity Engine. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| The Sign In With Google plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.8.0. This is due to the 'authenticate_user' user function not implementing sufficient null value checks when setting the access token and user information. This makes it possible for unauthenticated attackers to log in as the first user who has signed in using Google OAuth, which could be the site administrator. |
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product
features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz.
This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365).
Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices.
This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. |
| A vulnerability, which was classified as critical, has been found in Gowabby HFish 0.1. This issue affects the function LoadUrl of the file \view\url.go. The manipulation of the argument r leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and uploading of files. |
| Authentication vulnerability in the mobile application（tech.palm.id）may lead to the risk of information leakage. |
| The JobSearch WP Job Board plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.9.2. This is due to improper configurations in the 'jobsearch_xing_response_data_callback', 'set_access_tokes', and 'google_callback' functions. This makes it possible for unauthenticated attackers to log in as the first connected Xing user, or any connected Xing user if the Xing id is known. It is also possible for unauthenticated attackers to log in as the first connected Google user if the user has logged in, without subsequently logging out, in thirty days. The vulnerability was partially patched in version 2.8.4. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts. |
| A vulnerability was found in eGauge EG3000 Energy Monitor 3.6.3. It has been classified as problematic. This affects an unknown part of the component Setting Handler. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Papendorf SOL Connect Center 3.3.0.0 and classified as problematic. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to missing authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An improper access control vulnerability was found in the EZ Sync Manager of ADM, which allows authenticated users to copy arbitrary files from the server file system into their own EZSync folder. The vulnerability is due to a lack of authorization checks on the file parameter of the HTTP request. Attackers can exploit this flaw to access files outside their authorized scope, provided the file has readable permissions for other users on the underlying OS. This can lead to unauthorized exposure of sensitive data.
Affected products and versions include: from ADM 4.1.0 to ADM 4.3.3.RH61 as well as ADM 5.0.0.RIN1 and earlier. |
| Jupyter Scheduler is collection of extensions for programming jobs to run now or run on a schedule. The list of conda environments of `jupyter-scheduler` users maybe be exposed, potentially revealing information about projects that a specific user may be working on. This vulnerability has been patched in version(s) 1.1.6, 1.2.1, 1.8.2 and 2.5.2. |
| OpenObserve is a cloud-native observability platform. A vulnerability in the user management endpoint `/api/{org_id}/users/{email_id}` allows an "Admin" role user to remove a "Root" user from the organization. This violates the intended privilege hierarchy, enabling a non-root user to remove the highest-privileged account. Due to insufficient role checks, the `remove_user_from_org` function does not prevent an "Admin" user from removing a "Root" user. As a result, an attacker with an "Admin" role can remove critical "Root" users, potentially gaining effective full control by eliminating the highest-privileged accounts. The `DELETE /api/{org_id}/users/{email_id}` endpoint is affected. This issue has been addressed in release version `0.14.1` and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vulnerability in Tyche softwares Product Delivery Date for WooCommerce – Lite.This issue affects Product Delivery Date for WooCommerce – Lite: from n/a through 2.7.0. |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. |
| A flaw has been found in Magnetism Studios Endurance up to 3.3.0 on macOS. This affects the function loadModuleNamed:WithReply of the file /Applications/Endurance.app/Contents/Library/LaunchServices/com.MagnetismStudios.endurance.helper of the component NSXPC Interface. Executing manipulation can lead to missing authentication. The attack needs to be launched locally. The exploit has been published and may be used. |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
