| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
|
In EVE OS, the “measured boot” mechanism prevents a compromised device from accessing
the encrypted data located in the vault.
As per the “measured boot” design, the PCR values calculated at different stages of the boot
process will change if any of their respective parts are changed.
This includes, among other things, the configuration of the bios, grub, the kernel cmdline,
initrd, and more.
However, this mechanism does not validate the entire rootfs, so an attacker can edit the
filesystem and gain control over the system.
As the default filesystem used by EVE OS is squashfs, this is somewhat harder than an ext4,
which is easily changeable.
This will not stop an attacker, as an attacker can repackage the squashfs with their changes
in it and replace the partition altogether.
This can also be done directly on the device, as the “003-storage-init” container contains the
“mksquashfs” and “unsquashfs” binaries (with the corresponding libs).
An attacker can gain full control over the device without changing the PCR values, thus not
triggering the “measured boot” mechanism, and having full access to the vault.
Note:
This issue was partially fixed in these commits (after disclosure to Zededa), where the config
partition measurement was added to PCR13:
• aa3501d6c57206ced222c33aea15a9169d629141
• 5fef4d92e75838cc78010edaed5247dfbdae1889.
This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot. |
|
The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process. This vulnerability is due to an incomplete fix for CVE-2023-38418. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
|
| Kyverno is a policy engine designed for Kubernetes. A security vulnerability was found in Kyverno where an attacker could cause denial of service of Kyverno. The vulnerability was in Kyvernos Notary verifier. An attacker would need control over the registry from which Kyverno would fetch signatures. With such a position, the attacker could return a malicious response to Kyverno, when Kyverno would send a request to the registry. The malicious response would cause denial of service of Kyverno, such that other users' admission requests would be blocked from being processed. This is a vulnerability in a new component released in v1.11.0. The only users affected by this are those that have been building Kyverno from source at the main branch which is not encouraged. Users consuming official Kyverno releases are not affected. There are no known cases of this vulnerability being exploited in the wild. |
| Hydra is the layer-two scalability solution for Cardano. Prior to version 0.13.0, not signing and verifying `$\mathsf{cid}$` allows an attacker (which must be a participant of this head) to use a snapshot from an old head instance with the same participants to close the head or contest the state with it. This can lead to an incorrect distribution of value (= value extraction attack; hard, but possible) or prevent the head to finalize because the value available is not consistent with the closed utxo state (= denial of service; easy). A patch is planned for version 0.13.0. As a workaround, rotate keys between heads so not to re-use keys and not result in the same multi-signature participants. |
| A insufficient verification of data authenticity vulnerability [CWE-345] in FortiAnalyzer version 7.4.0 and below 7.2.3 allows a remote unauthenticated attacker to send messages to the syslog server of FortiAnalyzer via the knoweldge of an authorized device serial number. |
| Home assistant is an open source home automation. The Home Assistant Companion for Android app up to version 2023.8.2 is vulnerable to arbitrary URL loading in a WebView. This enables all sorts of attacks, including arbitrary JavaScript execution, limited native code execution, and credential theft. This issue has been patched in version 2023.9.2 and all users are advised to upgrade. There are no known workarounds for this vulnerability. This issue is also tracked as GitHub Security Lab (GHSL) Vulnerability Report: `GHSL-2023-142`. |
| Home assistant is an open source home automation. Whilst auditing the frontend code to identify hidden parameters, Cure53 detected `auth_callback=1`, which is leveraged by the WebSocket authentication logic in tandem with the `state` parameter. The state parameter contains the `hassUrl`, which is subsequently utilized to establish a WebSocket connection. This behavior permits an attacker to create a malicious Home Assistant link with a modified state parameter that forces the frontend to connect to an alternative WebSocket backend. Henceforth, the attacker can spoof any WebSocket responses and trigger cross site scripting (XSS). Since the XSS is executed on the actual Home Assistant frontend domain, it can connect to the real Home Assistant backend, which essentially represents a comprehensive takeover scenario. Permitting the site to be iframed by other origins, as discussed in GHSA-935v-rmg9-44mw, renders this exploit substantially covert since a malicious website can obfuscate the compromise strategy in the background. However, even without this, the attacker can still send the `auth_callback` link directly to the victim user. To mitigate this issue, Cure53 advises modifying the WebSocket code’s authentication flow. An optimal implementation in this regard would not trust the `hassUrl` passed in by a GET parameter. Cure53 must stipulate the significant time required of the Cure53 consultants to identify an XSS vector, despite holding full control over the WebSocket responses. In many areas, data from the WebSocket was properly sanitized, which hinders post-exploitation. The audit team eventually detected the `js_url` for custom panels, though generally, the frontend exhibited reasonable security hardening. This issue has been addressed in Home Assistant Core version 2023.8.0 and in the npm package home-assistant-js-websocket in version 8.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Local privilege escalation due to unrestricted loading of unsigned libraries. The following products are affected: Acronis Agent (macOS) before build 30600, Acronis Cyber Protect 15 (macOS) before build 35979. |
| A lack of input sanitizing in the file download feature of eSST Monitoring v2.147.1 allows attackers to execute a path traversal. |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. In version 2.3.0-beta2 and prior, when h2o is configured to listen to multiple addresses or ports with each of them using different backend servers managed by multiple entities, a malicious backend entity that also has the opportunity to observe or inject packets exchanged between the client and h2o may misdirect HTTPS requests going to other backends and observe the contents of that HTTPS request being sent.
The attack involves a victim client trying to resume a TLS connection and an attacker redirecting the packets to a different address or port than that intended by the client. The attacker must already have been configured by the administrator of h2o to act as a backend to one of the addresses or ports that the h2o instance listens to. Session IDs and tickets generated by h2o are not bound to information specific to the server address, port, or the X.509 certificate, and therefore it is possible for an attacker to force the victim connection to wrongfully resume against a different server address or port on which the same h2o instance is listening.
Once a TLS session is misdirected to resume to a server address / port that is configured to use an attacker-controlled server as the backend, depending on the configuration, HTTPS requests from the victim client may be forwarded to the attacker's server.
An H2O instance is vulnerable to this attack only if the instance is configured to listen to different addresses or ports using the listen directive at the host level and the instance is configured to connect to backend servers managed by multiple entities.
A patch is available at commit 35760540337a47e5150da0f4a66a609fad2ef0ab. As a workaround, one may stop using using host-level listen directives in favor of global-level ones. |
| Graylog is a free and open log management platform. Graylog makes use of only one single source port for DNS queries. Graylog binds a single socket for outgoing DNS queries and while that socket is bound to a random port number it is never changed again. This goes against recommended practice since 2008, when Dan Kaminsky discovered how easy is to carry out DNS cache poisoning attacks. In order to prevent cache poisoning with spoofed DNS responses, it is necessary to maximise the uncertainty in the choice of a source port for a DNS query. Although unlikely in many setups, an external attacker could inject forged DNS responses into a Graylog's lookup table cache. In order to prevent this, it is at least recommendable to distribute the DNS queries through a pool of distinct sockets, each of them with a random source port and renew them periodically. This issue has been addressed in versions 5.0.9 and 5.1.3. Users are advised to upgrade. There are no known workarounds for this issue. |
| OpenPGP.js is a JavaScript implementation of the OpenPGP protocol. In affected versions OpenPGP Cleartext Signed Messages are cryptographically signed messages where the signed text is readable without special tools. These messages typically contain a "Hash: ..." header declaring the hash algorithm used to compute the signature digest. OpenPGP.js up to v5.9.0 ignored any data preceding the "Hash: ..." texts when verifying the signature. As a result, malicious parties could add arbitrary text to a third-party Cleartext Signed Message, to lead the victim to believe that the arbitrary text was signed. A user or application is vulnerable to said attack vector if it verifies the CleartextMessage by only checking the returned `verified` property, discarding the associated `data` information, and instead _visually trusting_ the contents of the original message. Since `verificationResult.data` would always contain the actual signed data, users and apps that check this information are not vulnerable. Similarly, given a CleartextMessage object, retrieving the data using `getText()` or the `text` field returns only the contents that are considered when verifying the signature. Finally, re-armoring a CleartextMessage object (using `armor()` will also result in a "sanitised" version, with the extraneous text being removed. This issue has been addressed in version 5.10.1 (current stable version) which will reject messages when calling `openpgp.readCleartextMessage()` and in version 4.10.11 (legacy version) which will will reject messages when calling `openpgp.cleartext.readArmored()`. Users are advised to upgrade. Users unable to upgrade should check the contents of `verificationResult.data` to see what data was actually signed, rather than visually trusting the contents of the armored message. |
| Node-SAML is a SAML library not dependent on any frameworks that runs in Node. The lack of checking of current timestamp allows a LogoutRequest XML to be reused multiple times even when the current time is past the NotOnOrAfter. This could impact the user where they would be logged out from an expired LogoutRequest. In bigger contexts, if LogoutRequests are sent out in mass to different SPs, this could impact many users on a large scale. This issue was patched in version 4.0.5.
|
| uthenticode is a small cross-platform library for partially verifying Authenticode digital signatures. Versions of uthenticode prior to the 2.x series did not check Extended Key Usages in certificates, in violation of the Authenticode X.509 certificate profile. As a result, a malicious user could produce a "signed" PE file that uthenticode would verify and consider valid using an X.509 certificate that isn't entitled to produce code signatures (e.g., a SSL certificate). By design, uthenticode does not perform full-chain validation. However, the absence of EKU validation was an unintended oversight. The 2.0.0 release series includes EKU checks. There are no workarounds to this vulnerability. |
| A local user could edit the VideoEdge configuration file and interfere with VideoEdge operation. |
| cashIT! - serving solutions. Devices from "PoS/ Dienstleistung, Entwicklung & Vertrieb GmbH" to 03.A06rks 2023.02.37 are affected by a origin bypass via the host header in an HTTP request. This vulnerability can be triggered by an HTTP endpoint exposed to the network.
|
| Mattermost fails to properly validate the origin of a websocket connection allowing a MITM attacker on Mattermost to access the websocket APIs.
|
| uthenticode is a small cross-platform library for partially verifying Authenticode digital signatures. Version 1.0.9 of uthenticode hashed the entire file rather than hashing sections by virtual address, in violation of the Authenticode specification. As a result, an attacker could modify code within a binary without changing its Authenticode hash, making it appear valid from uthenticode's perspective. Versions of uthenticode prior to 1.0.9 are not vulnerable to this attack, nor are versions in the 2.x series. By design, uthenticode does not perform full-chain validation. However, the malleability of signature verification introduced in 1.0.9 was an unintended oversight. The 2.x series addresses the vulnerability. Versions prior to 1.0.9 are also not vulnerable, but users are encouraged to upgrade rather than downgrade. There are no workarounds to this vulnerability. |
| Vulnerability of insecure signatures in the ServiceWifiResources module. Successful exploitation of this vulnerability may cause ServiceWifiResources to be maliciously modified and overwritten. |
| Vulnerability of insecure signatures in the OsuLogin module. Successful exploitation of this vulnerability may cause OsuLogin to be maliciously modified and overwritten. |
