| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kirby is an open-source content management system. From versions 5.0.0 to 5.1.3, attackers could change the title of any page or the name of any user to a malicious string. Then they could modify any content field of the same model without saving, making the model a candidate for display in the "Changes" dialog. If another authenticated user subsequently opened the dialog in their Panel, the malicious code would be executed. This vulnerability affects all Kirby 5 sites that might have potential attackers in the group of authenticated Panel users or that allow external visitors to update page titles or usernames. The attack requires user interaction by another Panel user and cannot be automated. This issue has been patched in version 5.1.4. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked. |
| Misskey is an open source, federated social media platform. The patch for CVE-2024-52591 did not sufficiently validate the relation between the `id` and `url` fields of ActivityPub objects. An attacker can forge an object where they claim authority in the `url` field even if the specific ActivityPub object type require authority in the `id` field. Version 2025.2.1 addresses the issue. |
| The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘name’ parameter in all versions up to, and including, 4.13.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Avatars must be enabled in the WordPress install in order to exploit the vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/smaps: fix race between smaps_hugetlb_range and migration
smaps_hugetlb_range() handles the pte without holdling ptl, and may be
concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page().
The race is as follows.
smaps_hugetlb_range migrate_pages
huge_ptep_get
remove_migration_ptes
folio_unlock
pfn_swap_entry_folio
BUG_ON
To fix it, hold ptl lock in smaps_hugetlb_range(). |
| grist-core is a spreadsheet hosting server. Prior to version 1.7.7, a user with access to any document on a Grist installation can use a feature for fetching from a URL that is executed on the server. The privileged network access of server-side requests could offer opportunities for attack escalation. This issue is fixed in version 1.7.7. The mitigation was to use the proxy for untrusted fetches intended for such purposes. As a workaround, avoid making http/https endpoints available to an instance running Grist that expose credentials or operate without credentials. |
| Snipe-IT v8.3.4 (build 20218) contains a reflected cross-site scripting (XSS) vulnerability in the CSV Import workflow. When an invalid CSV file is uploaded, the application returns a progress_message value that is rendered as raw HTML in the admin interface. An attacker can intercept and modify the POST /livewire/update request to inject arbitrary HTML or JavaScript into the progress_message. Because the server accepts the modified input without sanitization and reflects it back to the user, arbitrary JavaScript executes in the browser of any authenticated admin who views the import page. NOTE: this is disputed by the Supplier because the report only demonstrates that an authenticated user can choose to conduct a man-in-the-middle attack against himself. |
| The YoSmart YoLink API through 2025-10-02 uses an endpoint URL that is derived from a device's MAC address along with an MD5 hash of non-secret information, such as a key that begins with cf50. |
| The YoSmart YoLink application through 2025-10-02 has session tokens with unexpectedly long lifetimes. |
| The YoSmart YoLink MQTT broker through 2025-10-02 does not enforce sufficient authorization controls to prevent cross-account attacks, allowing an attacker to remotely operate affected devices if the attacker obtains the associated device IDs. Because YoLink device IDs are predictable, an attacker can exploit this to gain full control over any other YoLink user's devices. |
| Components of the YoSmart YoLink ecosystem through 2025-10-02 leverage unencrypted MQTT to communicate over the internet. An attacker with the ability to monitor network traffic could therefore obtain sensitive information or tamper with the traffic to control affected devices. This affects YoLink Hub 0382, YoLink Mobile Application 1.40.41, and YoLink MQTT Broker. NOTE: The vendor states that the vulnerability described (related to insecure transmission) only impacts the legacy mobile application logic, not the Hub hardware or firmware. The Hub functions solely as a pass-through (transparent gateway) for LoRa wireless data and does not inspect or process the application layer data. |
| This CVE ID was duplicated of CVE-2025-32801 |
| AhnLab EPP 1.0.15 is vulnerable to SQL Injection via the "preview parameter." |
| Memos is a privacy-first, lightweight note-taking service that uses Access Tokens to authenticate application access. When a user changes their password, the existing list of Access Tokens stay valid instead of expiring. If a user finds that their account has been compromised, they can update their password. In versions up to and including 0.18.1, though, the bad actor will still have access to their account because the bad actor's Access Token stays on the list as a valid token. The user will have to manually delete the bad actor's Access Token to secure their account. The list of Access Tokens has a generic Description which makes it hard to pinpoint a bad actor in a list of Access Tokens. A known patched version of Memos isn't available. To improve Memos security, all Access Tokens will need to be revoked when a user changes their password. This removes the session for all the user's devices and prompts the user to log in again. One can treat the old Access Tokens as "invalid" because those Access Tokens were created with the older password. |
| QaTraq 6.9.2 ships with administrative account credentials which are enabled in default installations and permit immediate login via the web application login page. Because the account provides administrative privileges in the default configuration, an attacker who can reach the login page can gain administrative access. |
| QaTraq 6.9.2 allows authenticated users to upload arbitrary files via the "Add Attachment" feature in the "Test Script" module. The application fails to restrict file types, enabling the upload of executable PHP files. Once uploaded, the file can be accessed through the "View Attachment" option, which executes the PHP payload on the server. |
| Misskey is an open source, federated social media platform. In affected versions missing validation in `ApRequestService.signedGet` allows an attacker to create fake user profiles that appear to be from a different instance than the one where they actually exist. These profiles can be used to impersonate existing users from the target instance. Vulnerable Misskey instances will accept spoofed users as valid, allowing an attacker to impersonate users on another instance. Attackers have full control of the spoofed user and can post, renote, or otherwise interact like a real account. This issue has been addressed in version 2024.11.0-alpha.3. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| ClipBucket v5 is an open source video sharing platform. In versions 5.5.2-#146 and below, the Manage Playlists feature is vulnerable to stored Cross-site Scripting (XSS),specifically in the Playlist Name field. An authenticated low-privileged user can create a playlist with a malicious name containing HTML/JavaScript code, which is rendered unescaped on playlist detail and listing pages. This results in arbitrary JavaScript execution in every viewer’s browser, including administrators. This issue is fixed in version 5.5.2-#147. |
| HumHub is an Open Source Enterprise Social Network. Versions below 1.17.4 have a XSS vulnerability in the Meta-Search feature which allows malicious input to be executed in search previews. This issue is fixed in version 1.17.4. |
| Buffer overflow for some Intel(R) QAT Windows software before version 2.6.0. within Ring 3: User Applications may allow a denial of service. System software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
