| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Restriction of Excessive Authentication Attempts vulnerability in Akinsoft e-Mutabakat allows Authentication Bypass.This issue affects e-Mutabakat: from 2.02.06 before v2.02.06. |
| A vulnerability was found in TOTOLINK X5000R 9.1.0cu.2415_B20250515. This affects the function sub_410C34 of the file /cgi-bin/cstecgi.cgi. Performing manipulation of the argument pid results in command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. |
| A vulnerability has been found in PHPGurukul Beauty Parlour Management System 1.1. Affected by this issue is some unknown functionality of the file /admin/view-appointment.php. Such manipulation of the argument viewid leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| CKEditor 5 is a modern JavaScript rich-text editor with an MVC architecture. ckeditor5 and ckeditor5-clipboard versions 46.0.0 through 46.0.2 and 44.2.0 through 45.2.1 contain a Cross-Site Scripting (XSS) vulnerability. Ability to exploit could be triggered by a specific user action (leading to unauthorized JavaScript code execution) if the attacker managed to insert a malicious content into the editor, which might happen with a very specific editor configuration. This vulnerability affects installations where the editor configuration meets one of the following criteria: the HTML embed plugin is enabled, or there is a custom plugin introducing an editable element where view RawElement is enabled. This issue is fixed in versions 45.2.2 and 46.0.3 of both ckeditor5 and ckeditor5-clipboard. |
| A flaw has been found in PHPGurukul Beauty Parlour Management System 1.1. Affected by this vulnerability is an unknown functionality of the file /admin/update-image.php. This manipulation of the argument lid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used. |
| A vulnerability was detected in Jinher OA 1.0. Affected is an unknown function of the file /jc6/platform/sys/login!changePassWord.action of the component POST Request Handler. The manipulation of the argument Account results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. |
| Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. In netty-codec-compression versions 4.1.124.Final and below, and netty-codec versions 4.2.4.Final and below, when supplied with specially crafted input, BrotliDecoder and certain other decompression decoders will allocate a large number of reachable byte buffers, which can lead to denial of service. BrotliDecoder.decompress has no limit in how often it calls pull, decompressing data 64K bytes at a time. The buffers are saved in the output list, and remain reachable until OOM is hit. This is fixed in versions 4.1.125.Final of netty-codec and 4.2.5.Final of netty-codec-compression. |
| A security vulnerability has been detected in 1000projects Beauty Parlour Management System 1.0. This impacts an unknown function of the file /admin/contact-us.php. The manipulation of the argument mobnumber leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability has been identified in the libarchive library. This flaw can be triggered when file streams are piped into bsdtar, potentially allowing for reading past the end of the file. This out-of-bounds read can lead to unintended consequences, including unpredictable program behavior, memory corruption, or a denial-of-service condition. |
| A vulnerability has been identified in the libarchive library. This flaw involves an 'off-by-one' miscalculation when handling prefixes and suffixes for file names. This can lead to a 1-byte write overflow. While seemingly small, such an overflow can corrupt adjacent memory, leading to unpredictable program behavior, crashes, or in specific circumstances, could be leveraged as a building block for more sophisticated exploitation. |
| A flaw was found in libssh when using the ChaCha20 cipher with the OpenSSL library. If an attacker manages to exhaust the heap space, this error is not detected and may lead to libssh using a partially initialized cipher context. This occurs because the OpenSSL error code returned aliases with the SSH_OK code, resulting in libssh not properly detecting the error returned by the OpenSSL library. This issue can lead to undefined behavior, including compromised data confidentiality and integrity or crashes. |
| A vulnerability has been identified in the libarchive library. This flaw involves an integer overflow that can be triggered when processing a Web Archive (WARC) file that claims to have more than INT64_MAX - 4 content bytes. An attacker could craft a malicious WARC archive to induce this overflow, potentially leading to unpredictable program behavior, memory corruption, or a denial-of-service condition within applications that process such archives using libarchive. |
| A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition. |
| Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. |
| Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. |
| Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5.
|
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. The size check in the `gcoap_dns_server_proxy_get()` function contains a small typo that may lead to a buffer overflow in the subsequent `strcpy()`. In detail, the length of the `_uri` string is checked instead of the length of the `_proxy` string. The `_gcoap_forward_proxy_copy_options()` function does not implement an explicit size check before copying data to the `cep->req_etag` buffer that is `COAP_ETAG_LENGTH_MAX` bytes long. If an attacker can craft input so that `optlen` becomes larger than `COAP_ETAG_LENGTH_MAX`, they can cause a buffer overflow. If the input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerabilities could range from denial of service to arbitrary code execution. This issue has yet to be patched. Users are advised to add manual bounds checking. |
| RIOT is a real-time multi-threading operating system that supports a range of devices that are typically 8-bit, 16-bit and 32-bit microcontrollers. Most codebases define assertion macros which compile to a no-op on non-debug builds. If assertions are the only line of defense against untrusted input, the software may be exposed to attacks that leverage the lack of proper input checks. In detail, in the `nimble_scanlist_update()` function below, `len` is checked in an assertion and subsequently used in a call to `memcpy()`. If an attacker is able to provide a larger `len` value while assertions are compiled-out, they can write past the end of the fixed-length `e->ad` buffer. If the unchecked input above is attacker-controlled and crosses a security boundary, the impact of the buffer overflow vulnerability could range from denial of service to arbitrary code execution. This issue has not yet been patched. Users are advised to add manual `len` checking. |
| Deno is a JavaScript, TypeScript, and WebAssembly runtime with secure defaults. The Deno sandbox may be unexpectedly weakened by allowing file read/write access to privileged files in various locations on Unix and Windows platforms. For example, reading `/proc/self/environ` may provide access equivalent to `--allow-env`, and writing `/proc/self/mem` may provide access equivalent to `--allow-all`. Users who grant read and write access to the entire filesystem may not realize that these access to these files may have additional, unintended consequences. The documentation did not reflect that this practice should be undertaken to increase the strength of the security sandbox. Users who run code with `--allow-read` or `--allow-write` may unexpectedly end up granting additional permissions via file-system operations. Deno 1.43 and above require explicit `--allow-all` access to read or write `/etc`, `/dev` on unix platform (as well as `/proc` and `/sys` on linux platforms), and any path starting with `\\` on Windows.
|
