| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| After guessing a 62^15 complex unique identifier, a malicious logged in user was able to retrieve a list of memberships for a circle they are not a member of. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Require a BPF cpumask for bpf_cpumask_populate()
bpf_cpumask_populate() writes to its destination with bitmap_copy(), but
the destination is typed as struct cpumask *. That allows the verifier to
accept borrowed cpumask pointers returned by read-only kfuncs, such as
scx_bpf_get_online_cpumask(), as a writable destination.
Make the destination a struct bpf_cpumask * so populate follows the same
ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue
to accept const struct cpumask * inputs. |
| Apache Airflow Akeyless provider: the Akeyless secrets backend's team-scope guard can be bypassed with a user-controlled key. In a multi-team deployment, a Dag author scoped to one team can supply a Variable key containing a path separator that causes the backend to resolve a secret belonging to a different team, because the lookup path is concatenated from an unvalidated key after the team-scoped lookup misses. The Execution API Variables route accepts a path-shaped key, so this is reachable from ordinary Dag code.
Affects multi-team deployments using the Akeyless secrets backend. Single-team deployments are not affected, as there is no cross-team boundary to cross. This is the same class as CVE-2026-68870, CVE-2026-68871 and CVE-2026-68872 in the Azure Key Vault, Yandex Lockbox and Amazon secrets backends.
Users of apache-airflow-providers-akeyless are recommended to upgrade to version 0.3.1 or later, which fixes the issue. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20331 are related to the failure of protection mechanisms issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-693. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20194 are related to incorrect resource transfer between spheres that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-669. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20335 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20336 are related to issues concerning improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| The Download Manager plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 3.3.68 via the duplicate() function hooked on admin_init. This is due to the handler only verifying the generic 'edit_posts' capability and a plugin-wide static nonce (NONCE_KEY) without any object-level authorization check against the targeted wpdmpro package ID. This makes it possible for authenticated attackers, with Author-level access and above, to duplicate arbitrary Download Manager packages owned by other users (including administrators), which copies all package metadata — including protected file references, role-based access restrictions, and password lock settings — into an attacker-owned clone that they can then edit to remove restrictions and download the previously protected files. |
| Authorization bypass through User-Controlled key vulnerability in TECHIN2B TECHIN2B Application allows Privilege Abuse.
This issue affects TECHIN2B Application: from V1.0.7676.13 through 18092026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Convoy is a cloud native webhooks gateway. Prior to 26.6.8, Convoy's GET /api/v1/projects/{projectID}/sources/{sourceID} endpoint authorizes access to the project in the URL, but Handler.GetSource calls sources.Service.FindSourceByID() and fetches the Source only by sourceID without confirming that its ProjectID matches the authorized project. An authenticated user or project-scoped API key holder can substitute another tenant's Source identifier and receive that Source's complete record, including unredacted AMQP, Kafka, SQS, or Google PubSub credentials. The list endpoint remains project-scoped; the single-item Source lookup is affected. This issue is fixed in version 26.6.8. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.0.8 via the 'student_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to disclose the email address and Tutor profile phone number of arbitrary WordPress users, including Administrators, by iterating over user IDs via the student_id parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| vm2 (npm) versions 3.12.0 and earlier contain a sandbox escape in `VM` and `NodeVM`. When an embedder exposes a host API that returns a host-realm Promise, the bridge's rejection sanitizer (hostPromiseSanitizeReject / makeSanitizedPromiseCallback / normalizeHostPromiseCallbacks in lib/bridge.js) only wraps `then`/`catch` rejection slots that hold a function, and the sandbox-side `Symbol.species`/`.then` neutralization is installed only on the sandbox intrinsic `Promise.prototype`, so it never applies to a host Promise. Code running inside the sandbox can overwrite `p.constructor[Symbol.species]` on the host Promise and then call `p.then()` with no `onRejected` handler; V8 substitutes its internal Thrower, which re-throws the raw host rejection value into a resolve/reject closure captured by the attacker. This delivers an unsanitized, fully functional bridge proxy of the host object to sandboxed code, bypassing handleException and hostPromiseSanitizeReject. If the rejection value is host-pivotable (for example a host `process` object), this results in arbitrary code execution on the host. Fixed in 3.12.1. |
| snipe-it before 8.7.0 contains an incorrect calculation vulnerability in checkout request handling that allows authenticated users to corrupt the assets.requests_counter through duplicate submissions and cancellations without active requests. Attackers can repeatedly call cancel endpoints without active requests to drive the counter negative, or submit duplicate checkout requests to inflate the counter, misrepresenting pending demand in the admin queue. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.9 via the set_customer_object due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to enumerate arbitrary customer records and disclose personally identifiable information - including first name, last name, email address, and phone number - by iterating the customer[id] parameter. This issue is exploitable only when the site is configured with customer authentication disabled (guest checkout enabled). |
| IBM WebSphere Application Server 9.0, and 8.5 could allow a remote attacker to obtain sensitive information about the file system through the FileTransfer servlet. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT
on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves
CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard
IRQ context.
On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping
sighand->siglock:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
rt_spin_lock from lock_task_sighand
lock_task_sighand from run_posix_cpu_timers
run_posix_cpu_timers from update_process_times
ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M.
ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove
32bit KVM host support"), so the select need not be conditional on KVM.
Select it to defer POSIX CPU timer expiry to task context.
Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path
is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers
created with timer_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
In the perf enable path, there are missing cases where
cscfg_csdev_disable_active_config() is not called:
- Branch broadcast is selected but not supported by the hardware
- etm4_enable_hw() fails
This can lead to a leak of config_desc->active_cnt.
Fix this by properly calling cscfg_csdev_disable_active_config()
in these error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
