| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. The primary consequence of this bug is that bytes in the host's address space can be stored/read from. This is only applicable to the 16 bytes before linear memory, however, as the only significant return value of table.grow that can be misinterpreted is -1. The bytes before linear memory are, by default, unmapped memory. Wasmtime will detect this fault and abort the process, however, because wasm should not be able to access these bytes. Overall this this bug in Winch represents a DoS vector by crashing the host process, a correctness issue within Winch, and a possible leak of up to 16-bytes before linear memory. Wasmtime's default compiler is Cranelift, not Winch, and Wasmtime's default settings are to place guard pages before linear memory. This means that Wasmtime's default configuration is not affected by this issue, and when explicitly choosing Winch Wasmtime's otherwise default configuration leads to a DoS. Disabling guard pages before linear memory is required to possibly leak up to 16-bytes of host data. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Adobe Experience Manager versions 6.5.23 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim’s browser when they browse to the page containing the vulnerable field. |
| A weakness has been identified in bestfeng oa_git_free up to 9.5. This affects the function updateWriteBack of the file yimioa-oa9.5\server\c-flow\src\main\java\com\cloudweb\oa\controller\WorkflowPredefineController.java. This manipulation of the argument writeProp causes xml external entity reference. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be exploited. |
| A security flaw has been discovered in FantasticLBP Hotels Server up to 67b44df162fab26df209bd5d5d542875fcbec1d0. The impacted element is an unknown function of the file controller/api/hotelList.php. The manipulation of the argument subjectId/cityName results in sql injection. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Graphina – Elementor Charts and Graphs plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple chart widgets in all versions up to, and including, 3.1.8 due to insufficient input sanitization and output escaping on data attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability affects multiple chart widgets including Area Chart, Line Chart, Column Chart, Donut Chart, Heatmap Chart, Radar Chart, Polar Chart, Pie Chart, Radial Chart, and Advance Data Table widgets. |
| A vulnerability was detected in Four-Faith Water Conservancy Informatization Platform up to 2.2. This affects an unknown part of the file /aloneReport/index.do/../../aloneReport/download.do;othersusrlogout.do. Performing manipulation of the argument fileName results in path traversal. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Four-Faith Water Conservancy Informatization Platform up to 2.2. Affected by this issue is some unknown functionality of the file /stAlarmConfigure/index.do/../../aloneReport/download.do;otherlogout.do. Such manipulation of the argument fileName leads to path traversal. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Mangati NovoSGA up to 2.2.12. The impacted element is an unknown function of the file /novosga.users/new of the component User Creation Page. Executing manipulation of the argument Senha/Confirmação da senha can lead to weak password requirements. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitability is regarded as difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in nahiduddinahammed Hospital-Management-System-Website up to e6562429e14b2f88bd2139cae16e87b965024097. This issue affects some unknown processing of the file /delete.php. This manipulation of the argument ai causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in GuanxingLu vlarl up to 31abc0baf53ef8f5db666a1c882e1ea64def2997. This vulnerability affects the function experiments.robot.bridge.reasoning_server::run_reasoning_server of the file experiments/robot/bridge/reasoning_server.py of the component ZeroMQ. Performing manipulation of the argument Message results in deserialization. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. |
| A flaw has been found in JackieDYH Resume-management-system up to fb6b857d852dd796e748ce30c606fe5e61c18273. Affected by this issue is some unknown functionality of the file /admin/show.php. This manipulation of the argument userid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in MuFen-mker PHP-Usermm up to 37f2d24e51b04346dfc565b93fc2fc6b37bdaea9. This affects an unknown part of the file /chkuser.php. Performing manipulation of the argument Username results in sql injection. The attack may be initiated remotely. The exploit is now public and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in geyang ml-logger up to acf255bade5be6ad88d90735c8367b28cbe3a743. Affected by this issue is the function stream_handler of the file ml_logger/server.py of the component File Handler. Performing manipulation of the argument key results in information disclosure. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| A vulnerability was identified in geyang ml-logger up to acf255bade5be6ad88d90735c8367b28cbe3a743. Affected by this vulnerability is the function log_handler of the file ml_logger/server.py. Such manipulation of the argument File leads to path traversal. It is possible to launch the attack remotely. The exploit is publicly available and might be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. |
| A vulnerability has been found in MikroTik RouterOS 7. This affects the function parse_json_element of the file /rest/ip/address/print of the component libjson.so. The manipulation leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.20.1 and 7.21beta2 mitigates this issue. You should upgrade the affected component. The vendor replied: "Our bug tracker reports that your issue has been fixed. This means that we plan to release a RouterOS update with this fix. Make sure to upgrade to the next release when it comes out." |
| A security flaw has been discovered in MikeCen WeChat-Face-Recognition up to 6e3f72bf8547d80b59e330f1137e4aa505f492c1. This vulnerability affects the function valid of the file wx.php. The manipulation of the argument echostr results in cross site scripting. The attack can be launched remotely. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in pojoin h3blog up to 5bf704425ebc11f4c24da51f32f36bb17ae20489. Affected by this issue is the function ppt_log of the file /login of the component HTTP Header Handler. Such manipulation of the argument X-Forwarded-For leads to cross site scripting. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. |
| A vulnerability has been found in D-Link DI-8100, DI-8100G, DI-8200, DI-8200G, DI-8003 and DI-8003G 16.07.26A1/17.12.20A1/19.12.10A1. Affected by this vulnerability is the function sub_4621DC of the file usb_paswd.asp of the component jhttpd. The manipulation of the argument hname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
