| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stored XSS vulnerability in CComment component 5.0.0-6.1.14 for Joomla was discovered. |
| The devices do not implement any authentication for the web interface or the MQTT server. An attacker who has network access to the device immediately gets administrative access to the devices and can perform arbitrary administrative actions and reconfigure the devices or potentially gain access to sensitive data. |
| ejson2env allows users to decrypt EJSON secrets and export them as environment variables. Prior to version 2.0.8, the `ejson2env` tool has a vulnerability related to how it writes to `stdout`. Specifically, the tool is intended to write an export statement for environment variables and their values. However, due to inadequate output sanitization, there is a potential risk where variable names or values may include malicious content, resulting in additional unintended commands being output to `stdout`. If this output is improperly utilized in further command execution, it could lead to command injection, allowing an attacker to execute arbitrary commands on the host system. Version 2.0.8 sanitizes output during decryption. Other mitigations involve avoiding use of `ejson2env` to decrypt untrusted user secrets and/or avoiding evaluating or executing the direct output from `ejson2env` without removing nonprintable characters. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Harden userspace-supplied xdp_desc validation
Turned out certain clearly invalid values passed in xdp_desc from
userspace can pass xp_{,un}aligned_validate_desc() and then lead
to UBs or just invalid frames to be queued for xmit.
desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len
can cause positive integer overflow and wraparound, the same way low
enough desc->addr with a non-zero pool->tx_metadata_len can cause
negative integer overflow. Both scenarios can then pass the
validation successfully.
This doesn't happen with valid XSk applications, but can be used
to perform attacks.
Always promote desc->len to ``u64`` first to exclude positive
overflows of it. Use explicit check_{add,sub}_overflow() when
validating desc->addr (which is ``u64`` already).
bloat-o-meter reports a little growth of the code size:
add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)
Function old new delta
xskq_cons_peek_desc 299 330 +31
xsk_tx_peek_release_desc_batch 973 1002 +29
xsk_generic_xmit 3148 3132 -16
but hopefully this doesn't hurt the performance much. |
| EPSON 1.124 contains an unquoted service path vulnerability in the SENADB service that allows local attackers to execute code with elevated system privileges. Attackers can exploit the unquoted path in C:\Program Files (x86)\EPSON_P2B\Printer Software\Status Monitor\ to inject malicious executables that will run with LocalSystem permissions. |
| A Reflected XSS vulnerability in DJ-Reviews component 1.0-1.3.6 for Joomla was discovered. |
| Collabora Online is a collaborative online office suite based on LibreOffice technology. In versions prior to 24.04.12.4, 23.05.19, and 22.05.25, there is a path traversal flaw in handling the CheckFileInfo BaseFileName field returned from WOPI servers. This allows for a file to be written anywhere the uid running Collabora Online can write, if such a response was supplied by a malicious WOPI server. By combining this flaw with a Time of Check, Time of Use DNS lookup issue with a WOPI server address under attacker control, it is possible to present such a response to be processed by a Collabora Online instance. This issue has been patched in versions 24.04.13.1, 23.05.19, and 22.05.25. |
| GitHub Desktop is an open-source, Electron-based GitHub app designed for git development. Prior to version 3.4.20-beta3, an attacker convincing a user to view a file in a commit of their making in the history view can cause information disclosure by means of Git attempting to access a network share. This affects GitHub Desktop users on Windows that view malicious commits in the history view. macOS users are not affected. When viewing a file diff in the history view GitHub Desktop will call `git log` or `git diff` with the object id (SHA) of the commit, the name of the file, and the old name of the file if the file has been renamed. As a security precaution Git will attempt to fully resolve the old and new path via `realpath`, traversing symlinks, to ensure that the resolved paths reside within the repository working directory. This can lead to Git attempting to access a path that resides on a network share (UNC path) and in doing so Windows will attempt to perform NTLM authentication which passes information such as the computer name, the currently signed in (Windows) user name, and an NTLM hash. GitHub Desktop 3.4.20 and later fix this vulnerability. The beta channel includes the fix in 3.4.20-beta3. As a workaround to use until upgrading is possible, only browse commits in the history view that comes from trusted sources. |
| PDW File Browser 1.3 contains a remote code execution vulnerability that allows authenticated users to upload and rename webshell files to arbitrary web server locations. Attackers can upload a .txt webshell, rename it to .php, and move it to accessible directories using double-encoded path traversal techniques. |
| Uncontrolled search path for some Intel(R) Graphics Driver software may allow an authenticated user to potentially enable escalation of privilege via local access |
| The Gold Addons for Elementor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the activate() and deactivate() functions in all versions up to, and including, 1.3.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to activate and deactivate licenses. |
| wire-webapp is the web application for the open-source messaging service Wire. A change caused a regression resulting in sessions not being properly invalidated. A user that logged out of the Wire webapp, could have been automatically logged in again after re-opening the application. This does not happen when the user is logged in as a temporary user by selecting "This is a public computer" during login or the user selects "Delete all your personal information and conversations on this device" upon logout. The underlying issue has been fixed with wire-webapp version 2025-05-20-production.0. As a workaround, this behavior can be prevented by either deleting all information upon logout as well as logging in as a temporary client. |
| PMB 5.6 contains a local file disclosure vulnerability in getgif.php that allows attackers to read arbitrary system files by manipulating the 'chemin' parameter. Attackers can exploit the unsanitized file path input to access sensitive files like /etc/passwd by sending crafted requests to the getgif.php endpoint. |
| The Lexicata plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.0.16. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute if they can successfully trick a user into performing an action, such as clicking on a specially crafted link. |
| Incorrect default permissions for some Intel(R) One Boot Flash Update (Intel(R) OFU) software before version 14.1.31 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A cross-site scripting (XSS) vulnerability has been reported to affect Notification Center. If a remote attacker gains an administrator account, they can then exploit the vulnerability to bypass security mechanisms or read application data.
We have already fixed the vulnerability in the following versions:
Notification Center 2.1.0.3443 and later
Notification Center 1.9.2.3163 and later
Notification Center 3.0.0.3466 and later |
| Hubble is a fully distributed networking and security observability platform for cloud native workloads. Prior to version 1.17.2, a network attacker could inject malicious control characters into Hubble CLI terminal output, potentially leading to loss of integrity and manipulation of the output. This could be leveraged to conceal log entries, rewrite output, or even make the terminal temporarily unusable. Exploitation of this attack would require the victim to be monitoring Kafka traffic using Layer 7 Protocol Visibility at the time of the attack. The issue is patched in Hubble CLI v1.17.2. Hubble CLI users who are unable to upgrade can direct their Hubble flows to a log file and inspect the output within a text editor. |
| YATinyWinFTP contains a denial of service vulnerability that allows attackers to crash the FTP service by sending a 272-byte buffer with a trailing space. Attackers can exploit the service by connecting and sending a malformed command that triggers a buffer overflow and service crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU in ip6_output()
Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent
possible UAF.
We can remove rcu_read_lock()/rcu_read_unlock() pairs
from ip6_finish_output2(). |
| In DOMPurify through 3.2.5 before 6bc6d60, scripts/server.js does not ensure that a pathname is located under the current working directory. NOTE: the Supplier disputes the significance of this report because the "Uncontrolled data used in path expression" occurs "in a development helper script which starts a local web server if needed and must be manually started." |
